Expansion Joint Sealing in Gulberwick
Expansion joint sealing in Gulberwick, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Brittle, chalky sealant on external joints
- Debris jammed in movement joints
- Car park joints leaking onto vehicles below
Expansion joint sealing near Gulberwick
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our expansion joint sealing in Gulberwick
If you need expansion joint sealing in Gulberwick, start with photographs and joint lengths. Send them through our quote form, and we will arrange a site visit if needed. You can also give us a call on 01277 525 020 or email the details over to talk the joints through. We work on car park decks and ramps, brickwork movement joints and blockwork control joints, and the failures we’re asked to look at most are rain penetration at brick or block movement joints and arrises breaking up along floor joints. Facilities teams, main contractors and managing agents in Gulberwick tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller Scottish places like Gulberwick, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Gulberwick (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What happens if it’s left?
Spot repairs can be useful on a tight budget. The remaining sealant is often close to failing too, and a second visit means paying for access again. Where it helps, we quote both options. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Gulberwick, a repair visit takes planning, so it’s better to act early.
The price depends on the quantity of joints, what has to come out first and the access. Call for a fixed quote once you have the details.
Why choose Mastic Doctor in Gulberwick
- Sealing commercial buildings since 2005
- Workmanship guaranteed for 12 months
- Health and safety: CHAS accredited
- Coloured sealants to suit the setting, where available
Read what affects the cost or our accreditations and insurance.
Places near Gulberwick
What else we do in Gulberwick
What affects the price in Gulberwick
To price the job, we consider:
- Distance, for remote addresses
- Which sealant the job calls for
- How accessible the joints are
- Backing rod, priming and other preparation
Pricing movement joints depends on quantities, condition and access. Call for a quote.
Details that help us quote
Whether it’s one area or a whole building, the same details help:
- The asbestos register, for older buildings
- Specification clauses that apply
- The site address and postcode
- When you need the work done
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
Questions about Gulberwick
Does your area include sites such as South Gremista Industrial Estate, near Gulberwick?
Yes, sites like South Gremista Industrial Estate are within our area, along with the rest of Gulberwick. To start, just speak to us on 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Will you travel to Gulberwick on the island?
Yes, Gulberwick is within the area we cover. We cover the whole of Scotland. Ferry times and the weather set the plan, so we ask for photographs and a full list first.
What exactly is a movement joint?
They’re closely related. Both let materials grow and shrink with temperature, moisture and load.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we will confirm the curing time on the day.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it, flagging anything that needs clarifying.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Will you quote for a small job?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Our process
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself usually taking a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. Jobs near Gulberwick are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- We assess the joints on site or from photos, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Point out any areas we must not close
- Have the specification and drawings to hand
- Let building users know which areas are affected
Getting a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or ring 01277 525 020 or email the details over to discuss it first.
Advice
Commercial clients in Gulberwick
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
What sealant work can’t fix
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be any of the following:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Joints too narrow for the movement, which need redesigning by the engineer
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
Not sure which it is? You can phone 01277 525 020 or email drawings and photos and we’ll tell you honestly.
What we seal
- Car park decks and ramps
- Precast concrete panel joints
- Cladding panel joints
- Podiums and floor movement joints
- Blockwork control joints
- Brickwork movement joints
Do you need expansion joint sealing in Gulberwick?
Repeated failure often traces back to the wrong product. Products not classed for the movement fail early. Movement capability is set out in BS EN ISO 11600.
Common reasons buildings call us in:
- Arrises breaking up along floor joints
- Sealant peeling off one face of the joint
- Weathered movement joint sealant that no longer flexes
- Layers of sealant in a movement joint
If you manage units on an estate such as South Gremista Industrial Estate, which lies north-east of Gulberwick, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Comparing quotes
- Which product they’ll use, and why it suits the joint
- How joint depth will be controlled
- Do they follow the manufacturer’s priming guidance?
- Whether their applicators hold CSCS cards
Where floor joints take the most wear near Gulberwick
Gulberwick sits close to the coast, within about 1 mile. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, and edges left open tend to break up faster. Being on an island, Gulberwick means planning around ferry times as well as the weather. Joint widths, lengths and the traffic over them help us bring the right fillers and sealants.
Hospital campuses such as Gilbert Bain Hospital, 2.5 miles north-east of Gulberwick, grow in stages, leaving movement joints wherever new blocks meet old.
Gulberwick is in the Shetland Islands. Across the ZE2 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 63 places in the Shetland Islands, large and small.
Postcode districts covered here: ZE2. If your site is on Hillside Brae, Hillside Park and Lower Hillside or close by, we can quote for movement joints. Sites close to Gulberwick are covered too, including Sound (2 miles north-east), Scalloway (2 miles west), Lerwick (3 miles north-east), Gremista (3 miles north-east) and Grindiscol (4 miles east). As one of the bigger centres in the Shetland Islands, Gulberwick has a broad mix of commercial, public and industrial buildings. Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you give us a call on 01277 525 020 or email drawings and photos.
Landmarks near Gulberwick
Other landmarks nearby include Scalloway Museum (2.5 miles north-west) and Gilbert Bain Hospital (2.5 miles north-east). The countryside around Gulberwick includes Hill of Berry and Flossy Loch.