Expansion and movement joint sealing in Dalmeny, Edinburgh
Expansion and movement joint sealing in walls, decks and floors in Dalmeny and across Edinburgh. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Hardened, cracked sealant on exposed facades
- Debris jammed in movement joints
- Joints where the bead has lost adhesion
Expansion joint sealing across Dalmeny
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Common questions from Dalmeny clients
Is Dalmeny too small for you to travel to?
Not at all. Dalmeny is within our area. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
Does the sea air around Dalmeny change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we will send them with the quote.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
What do you charge?
It depends on the job: quantities, access, the product and any phasing. Call for a fixed quote.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
About our expansion joint sealing in Dalmeny
If you need expansion joint sealing in Dalmeny, start with photos and joint lengths. Send them through our quote form, and we will arrange a site visit if needed, then send a fixed quote that names the sealant. To discuss the joints first, ring 01277 525 020 or send details through our quote form. If you have brittle, chalky sealant on external joints and car park joints leaking onto vehicles below, we can put it right, whatever the surface. A specialist sealant contractor works differently from a general builder: on jobs in Dalmeny, preparation and product choice get the time they need.
For outside joints near Dalmeny, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range, so dates have some give. Internal floors can be done whenever suits the site.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Location
- Dalmeny (EH30, EH7)
- Region
- Edinburgh
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
More services for Dalmeny
Owners, agents and contractors
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
What sets the cost
These are the things that shape the price:
- Joint width, depth and condition
- Removal of failed or old sealant
- The total length or number of joints
- Which sealant the job calls for
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a quote when you are ready.
Before you send an enquiry
The more we know, the firmer the quote. When you get in touch, include:
- How the joints are reached, and at what height
- Approximate linear metres or a joint schedule
- Where the site is, with the postcode
- When you need the work done
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, phone 01277 525 020 or send photos by email.
Surface by surface
Podium joints
Podium joints often sit within a waterproofing system. We reseal the joint where sealant is the specified fix and flag it if the membrane looks like the source.
Internal floor movement joints
Floor joints include saw-cut joints and construction joints. Trafficked floor joints often get a semi-rigid filler, with a flexible sealant where movement is larger.
Traffic, movement and joints around Dalmeny
The sea is no more than about 1 mile from Dalmeny. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. The east of Scotland, where Dalmeny is, gets less rain than the west. Frost and de-icing salt still find their way into open external joints. Sealing them before winter limits the damage.
In a school such as Queensferry High School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Sites like Hopetoun House (to the west of Dalmeny) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Dalmeny is about 1 mile east of Queensferry, in Edinburgh. Commercial clients in Dalmeny can call on us for movement joints, as part of our coverage of Edinburgh. Dalmeny is one of 174 places in Edinburgh on our list for movement joints. There’s a separate page for Edinburgh, about 7 miles away.
If you need expansion joint sealing in EH30 and EH7, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Among the streets we cover are Main Street, Bankhead Road and Carlowrie Avenue, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Queensferry (1 mile west), Lennie (2 miles south-east), Cammo (3 miles south-east), Braepark (3 miles south-east) and Barnton (3 miles south-east). Bigger towns within reach include Edinburgh (7 miles south-east), Leith (8 miles east), Bonnington (7 miles east), Greenside (7 miles east), Broughton (7 miles east) and Bellevue (7 miles east).
Near you in Dalmeny
The closest station to Dalmeny is Dalmeny station, about 0.5 miles north-west. Other landmarks nearby include The Gyle Shopping Centre (3.7 miles south-east) and Hopetoun House (3.7 miles west). Green spaces nearby include Corstorphine Hill and Dundas Loch.
On site: what to expect
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs near Dalmeny are often grouped with others in the same area. Tell us how flexible your dates are.
- We look at the joints, their width and how they’ve failed.
- Next, we fix a price and confirm the sealant we propose for the movement.
- We strip out the old seal and prepare the faces, and we tell you if any edges need repairing first.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Finished joints are checked and backed by our 12-month guarantee.
What we need from you
- Let us know about inductions and permits
- For older buildings, check the asbestos register before work
- Tell staff and tenants when we will be in
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Advice
Maintenance after handover
Regular inspection catches problems early. In particular:
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Avoid parking heavy plant or pallets on joint lines
- Reopen bays and walkways only after the stated cure time
- Treat a small split as a warning, not a cosmetic issue
Snow ploughs and scrapers catch on joint lines. Lifting the blade at each joint avoids tearing the bead and a look at the joints after winter catches any damage.
External wall joints that fail let rain into the masonry and cavity. It can surface inside as damp a long way from the joint. Resealing promptly prevents internal damage.
Site staff or a sealant specialist?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.