Expansion joint sealing in Clovenstone
Need expansion joint sealing in Clovenstone? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Leaks through car park deck joints onto the level below
- Damp inside where a wall movement joint has failed
- Previous reseals laid over old sealant
Need expansion joint sealing in Clovenstone?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our expansion joint sealing in Clovenstone
For movement joints in Clovenstone, photographs and approximate lengths are the best start. We will come and look where photos don’t show enough. To discuss the joints first, give us a call on 01277 525 020 or email the details over. We work on precast concrete panel joints, brickwork movement joints and blockwork control joints, and the failures we’re asked to look at most are expansion joints filled with dirt and stones and sealant peeling off one face of the joint. Facilities teams, main contractors and managing agents in Clovenstone tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
In Scotland’s cities, buildings from car parks and malls to university and hospital estates rely on movement joints. Failed joints let water in, and repeated frost then works on the edges.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant.
- Location
- Clovenstone (EH14, EH13, EH11)
- Wider area
- Edinburgh
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
After the work
After handover, these steps help:
- Keep stones and debris out of open joint lines
- Note which joints were done, when, and with what
- Check joints after long freezing spells
- Reopen bays and walkways only after the stated cure time
Floor joints on main traffic routes need watching more closely than the rest. Avoid standing heavy loads or racking legs on the joints and flag chipped arrises before they spread.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Broken arrises jolt trucks, loads and drivers and the broken length grows with every pass. Keeping the filler or sealant sound protects the floor.
Nearby places to Clovenstone
Other services in Clovenstone
Questions we are asked in Clovenstone
Does your area include sites such as Westside Plaza Shopping Centre, near Clovenstone?
Yes. Our area takes in Clovenstone and its surroundings, with estates and business parks such as Westside Plaza Shopping Centre included. A few photos and the unit address let us price the work.
Would you work within a site like Spire Murrayfield Hospital?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Does the weather affect joint sealing?
Sealing onto a damp surface leads to adhesion failure. The work is simply moved to the next suitable day.
Do you reseal car park expansion joints?
Yes. Tyre loads, grit and de-icing salts make these some of the hardest joints to keep sealed, and we will tell you if any edges need repairing first.
Can one quote cover more than one building?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
What the job involves on each surface
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. We use a sealant made for wheel loads and the expected movement, phased so parts of the car park stay open.
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. We match the product to the traffic and the movement.
Do you need expansion joint sealing in Clovenstone?
When the movement exceeds the sealant’s capability, the bead tears. A joint that’s too narrow for the movement, or a product with the wrong movement class, will split through the middle. Resealing like for like often fails the same way.
Site and facilities staff are often the first to spot these:
- Previous reseals laid over old sealant
- Expansion joints filled with dirt and stones
- Sealant pulling off the joint face
- Rain penetration at brick or block movement joints
Across sites such as Dumbryden Industrial Estate, which lies north of Clovenstone, floor and movement joints can be sealed in phases so units keep working.
What to look for in a quote
- Proof of insurance
- Whether primer will be used where the manufacturer specifies it
- Will RAMS and insurance details be available?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Where floor joints take the most wear near Clovenstone
The 3 miles around Clovenstone take in at least three named trading estates, business parks or retail parks. Their warehouses, yards and car parks are exactly where joints take the most punishment. The east of Scotland, where Clovenstone is, gets less rain than the west. Cold winters and gritting are hard on any yard or deck joint left open. Resealing before the cold months helps protect the edges.
Large sites such as Spire Murrayfield Hospital (2.2 miles north of Clovenstone) have car parks, service roads and long elevations with movement joints in brick and panels. University campuses such as Edinburgh Napier University - Sighthill Campus (to the north-west of Clovenstone) have car parks, paved walkways and building elevations with movement joints.
Clovenstone is about 3 miles south-west of Edinburgh, in Edinburgh. Across the EH14 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. 174 places across Edinburgh fall within our area, including Clovenstone.
Work on movement joints is covered throughout EH14, EH13 and EH11, whatever the building. For a building on Lanark Road, Ashcroft Lane and Alcorn Square or nearby, we can quote for movement joints. Clovenstone sits on or close to the A70, useful when we plan access and materials. Sites close to Clovenstone are covered too, including Baberton (1 mile west), Wester Hailes (1 mile north-west), Kingsknowe (1 mile north-east), Juniper Green (1 mile south-west) and Sighthill (1 mile north-west). A short drive away, we cover Edinburgh (3 miles north-east), Leith (6 miles north-east), Bonnington (5 miles north-east), Greenside (5 miles north-east), Broughton (5 miles north-east) and Bellevue (5 miles north-east).
Around Clovenstone
Recent enquiries here include premises near Saughton Park, Merchiston Castle School and Juniper Green Parish Church and the streets around them. Clovenstone has its own railway station: Wester Hailes station. Well-known places in the area include The Gyle Shopping Centre (2.4 miles north-west) and War Poets Collection (1 mile north-west). Open spaces near Clovenstone include Torduff Hill and The New Leaf Co-op.
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Work on a big city site in Scotland typically involves inductions and permits. Pass on the site’s contractor rules when you get in touch.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Before we start on site
- Tell us what induction or permit system the site runs
- Clear stock, furniture or equipment away from the joints
- Explain the parking and delivery arrangements
Quotes
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or send photos by email if you’d rather talk the job through.
Read more
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Clovenstone can sit alongside others in a wider programme across Edinburgh.
When something else is needed
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Crumbling edges that would give a new bead nothing sound to grip
- Movement on a scale no sealant is meant to absorb
- Joints too narrow for the movement, which need redesigning by the engineer
Not sure which it is? You can speak to us on 01277 525 020 or email the details over and we will tell you honestly.
What we seal
- Cladding panel joints
- Car park decks and ramps
- Podiums and floor movement joints
- Precast concrete panel joints
- Blockwork control joints
- Brickwork movement joints