Expansion and movement joint sealing in Bighton, Hampshire
Expansion joint sealing for Bighton, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Joints packed with grit and debris
- Layers of sealant in a movement joint
- Sealant peeling off one face of the joint
Expansion joint sealing for businesses in Bighton
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Why deal with it now?
A torn seal left alone usually gets worse. Grit and water fill the gap and the material either side breaks up and the job grows to repairs as well as sealing. Acting at the first split keeps the cost down. For buildings around smaller places like Bighton, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why us?
- Work carried out by CSCS-carded applicators
- Constructionline member
- Public liability insurance in place
- Coloured sealants to suit the setting, where available
Take a look at what affects the cost or how we’re accredited.
Expansion joint sealing for commercial buildings in Bighton
Long runs of brick or block have movement joints built in, and they’re easy to miss until the sealant fails. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal is cut away, backing rod goes in at depth, and a low-modulus masonry sealant is gunned and tooled with primer where the maker calls for it. If you’re dealing with arrises breaking up along floor joints and hardened, cracked sealant on exposed facades, we can put it right, on car park decks and ramps, brickwork movement joints and podiums and floor movement joints alike. Searching for sealant specialists in Bighton? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Jobs around smaller places like Bighton are planned so the whole job is done in one visit. Note joint widths and the traffic that uses them, and we will take it from there.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Place
- Bighton (SO24)
- Region
- Hampshire
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What we can’t put right
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Joints too narrow for the movement, which need redesigning by the engineer
- Concrete or masonry repairs along the arrises
- Cracking or settlement that calls for an engineer’s assessment
If in doubt, call the office on 01277 525 020 or email the details over and we will say what we think.
Surfaces we seal
- Blockwork control joints
- Cladding panel joints
- Podiums and floor movement joints
- Car park decks and ramps
- Brickwork movement joints
- Precast concrete panel joints
Towns and villages near Bighton
More services for Bighton
FAQs: Bighton
Is Bighton too small for you to travel to?
Not at all. Bighton is within our area. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Will our site in Bighton have to close for joint sealing?
Rarely. Work is phased around your operations. We agree the sequence and timings with you before we start.
Do you reseal car park expansion joints?
Yes, we do. Tyre loads, grit and de-icing salts make these some of the hardest joints to keep sealed, and we’ll tell you if any edges need repairing first.
How do I request a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or send details through our quote form. Photos, drawings or a joint schedule help us quote quickly.
Does the weather affect joint sealing?
The joint has to be dry, and the air and surface temperature inside the product’s limits. Frost, rain and condensation on steel or concrete can hold up external work, so we plan with the forecast in mind.
Will you just go over the old sealant?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
What if the joint edges are damaged?
Sealant needs sound faces to bond to, so we will tell you if the edges need repairing before sealing. Where it’s visible beforehand, we will say so when we quote.
Cost factors for movement joints
We price every job individually. The things that drive the figure:
- Joint width, depth and condition
- Any access equipment needed
- The product specified
- Whether the work must be split into stages
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- Access details, including height
- What the building is and how it’s used
- The site address and postcode
- Photos of the joints, close up and from further back
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or use the quote form.
Floors, slabs and movement joints in Bighton
Bighton has two named business or industrial parks inside a 3-mile radius. Their warehouses, yards and car parks are exactly where joints take the most punishment. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
Schools such as Perins School have movement joints in their walls and floors that are easy to overlook. At places like Lower Soldridge Business Park, which lies east of Bighton, joints are sealed a section at a time so operations carry on. Estates like Barton Industrial Estate, 2.5 miles to the north-east of Bighton, combine warehouse slabs, yards and loading bays, all with joints under wheels.
Bighton is about 7 miles south-west of Alton, in Hampshire. Any commercial site in Bighton is covered, for single jobs and planned programmes alike. Bighton is one of 723 places in Hampshire on our list. For work in that direction, see our Southampton page (17 miles or so).
Postcode districts covered here: SO24 for movement joints. Close to Bighton, our area also takes in Old Alresford (1 mile west), Upper Wield (3 miles north-east), Northington (3 miles north-west), Totford (3 miles north-west) and Brown Candover (4 miles north-west). A short drive away, we cover Basingstoke (11 miles north), Winchester (9 miles west), Eastleigh (13 miles south-west), Horndean (15 miles south), Chandler's Ford (14 miles south-west) and Alton (7 miles north-east).
What’s near Bighton
We work on buildings around Three Horseshoes Public House. Well-known places in the area include Barton Castle (2.4 miles north). Open spaces near Bighton include Red Hill.
Owners, agents and contractors
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Bighton can sit alongside others in a wider programme across Hampshire.
Different surfaces, different methods
Joints between different materials
Different materials meeting at a joint rarely move in step. The product must bond to both substrates and cope with the movement priming where the maker calls for it.
Podium joints
Podium decks are exposed and often trafficked. A sealant suited to both traffic and exposure is used.
Diagnose, treat, sign off
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself usually takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases, and our waste is bagged and taken away as we go. Jobs in and around smaller places like Bighton are usually planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take, and flag anything that needs an engineer.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Preparing the site
- Point out parking and an unloading spot
- Share the asbestos register for older buildings
- Tell us which areas need to stay in use
Quotes
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.