Commercial sealant contractors in Bighton, Hampshire
Need commercial sealant contractors in Bighton? It’s simple: send details, get a quote, we seal, guaranteed.
- Window and door perimeter joints that have cracked open
- Weathered facade sealant that no longer flexes
- Leaks that seem to come through a sealant line
Commercial sealant contractors for businesses in Bighton
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Working on commercial sites near Bighton
Bighton is about 52 miles from central London. The South East around the capital has large numbers of business parks, offices and retail centres, especially around the motorway corridors. Occupiers with several premises in the region tend to prefer one contractor and one point of contact. Two named trading, business or retail sites lie within about 3 miles of Bighton. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal, often in a colour the occupier specifies.
Sites a few miles apart, such as Barton Industrial Estate and Lower Soldridge Business Park, can share one programme and one point of contact. If you run a unit on an estate such as Barton Industrial Estate, 2.5 miles to the north-east of Bighton, the trade counter, offices and staff facilities have joints to look after as well as the warehouse.
Bighton is about 7 miles south-west of Alton, in Hampshire. Looking for commercial sealant contractors in Bighton? We can help. Bighton is one of 723 places we cover in Hampshire. Southampton is covered too, around 17 miles from Bighton.
Work on sealant joints is covered throughout SO24. Just outside Bighton, we also work in Old Alresford (1 mile west), Upper Wield (3 miles north-east), Northington (3 miles north-west), Totford (3 miles north-west) and Brown Candover (4 miles north-west). Further afield, our area takes in Basingstoke (11 miles north), Winchester (9 miles west), Eastleigh (13 miles south-west), Horndean (15 miles south), Chandler's Ford (14 miles south-west) and Alton (7 miles north-east).
Landmarks near Bighton
Locally, jobs take us to sites close to Three Horseshoes Public House and the streets around them. Nearby you will also find Barton Castle (2.4 miles north). The countryside around Bighton includes Red Hill.
How we handle commercial sealant contractors in Bighton
If you look after more than one building, a single sealant contractor saves a lot of chasing. Single jobs, multi-site packages and planned programmes all come to us: details in, a fixed quote back, the sealing done, then our 12-month guarantee. To get a programme moving in Bighton, call the office on 01277 525 020 or email drawings and photos with the site addresses. Most enquiries involve expansion joints with the sealant torn out and leaks that seem to come through a sealant line, across window and door perimeters, movement joints in walls and floors and floor and threshold joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Bighton, that means joint design, primers and backing rod as standard.
In an occupied building in Bighton, the job is planned so areas stay in use: we agree the order with you and hand back each area with its cure time.
Rural business units near smaller places such as Bighton are frequently converted agricultural buildings. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
- Where
- Bighton (SO24)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Different surfaces, different methods
Fire-rated seals where specified
Where the specification calls for fire-rated or intumescent sealant around service penetrations or linear gaps, we install it to the product’s tested detail. Fire-stopping design and sign-off sit with the designer, fire engineer or building control, and we install to the specification.
Window and door perimeters
The perimeter joint between a frame and the structure keeps rain out of the reveal. We remove the old seal, prepare the faces, fit backing where needed and seal again with a product chosen for both the frame and the wall.
How the quote is worked out
Before we quote, we look at:
- The product specified
- Site requirements such as inductions and permits
- How much existing material needs removing
- The total length or number of joints
Pricing sealant joints depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.
What we need to price the job
A good diagnosis starts with the right details. Tell us:
- The site address and postcode
- A wide shot and a close-up of the area
- The type of building and who uses it
- Your programme or deadline
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, call the office on 01277 525 020 or use the quote form.
After the work
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Put external and wet-area joints on a regular inspection round
- Log reseals in the O&M or maintenance records
- Make sure ventilation in wet areas is switched on and working
- Check the asbestos register before anyone disturbs old sealant in an older building
Our workmanship on each job is backed by a 12-month guarantee. File the handover note with the building records, and tell us if a joint we sealed gives trouble within that time.
A failed external joint lets water in every time it rains. Behind a panel or frame, that water can sit unseen for a long time. Resealing early keeps the problem in the sealant and out of the building.
When to bring in a specialist
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
Nearby places to Bighton
What else we do in Bighton
FAQs: Bighton
Is Bighton too far out for you?
Not at all. Bighton is within our area. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Will our hotel in Bighton need to close for the work?
In most cases no closure is needed: we work room by room or floor by floor. Housekeeping and our team agree each day’s rooms.
Do you check for asbestos before removing sealant?
In buildings from before 2000 in particular, some old mastics and sealants may contain asbestos. We ask to see the asbestos register or survey before disturbing old sealant, and if something is suspected, work stops until it’s tested.
Is it fine to apply new sealant on top of old?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Is failed sealant stripped out, or sealed over?
Every scrap of failed sealant is removed before the new bead goes on. A bead laid on old silicone peels away and isn’t worth paying for.
Will the building have to shut during the work?
It’s mostly about sequence: areas are phased, access windows agreed and enough washrooms or entrances left in use. Let us know what can’t close and we’ll work around it.
Do you work for facilities managers and managing agents?
Yes. A large share of our work comes through facilities managers, managing agents and landlords, alongside main contractors. We can work to your instruction process and site rules.
Commercial clients in Bighton
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
How a job runs
Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. If others near Bighton need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- Site photographs, drawings or a visit tell us what’s there and how it has failed.
- You get a fixed quote covering removal, preparation and the new sealant.
- We agree the order of work, access windows and site hours with you.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Backing goes in, the new sealant is laid and tooled, and the area is left neat.
- We hand back each area with its cure time and our 12-month guarantee.
Getting the site ready
- Clear stock, furniture or equipment away from the joints
- Tell us your opening times and when work is allowed
- Send any specification or drawings in advance
Quotes
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.