Hampshire · England
Commercial sealant contractors in SO24
We cover every part of the SO24 postcode district, which takes in New Alresford, Ropley and Bishop's Sutton. Every joint is properly prepared, with a 12-month guarantee.
Need sealant work in SO24?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Places in SO24
- New Alresford
- Ropley
- Bishop's Sutton
- Cheriton
- Monkwood
- Bramdean
- Old Alresford
- Ropley Dean
- Brown Candover
- Gilbert Street
- Hinton Ampner
- Gundleton
- Beauworth
- Bighton
- Bradley
- Charlwood
- Itchen Stoke
- Kitwood
- North Street
- Totford
- West Tisted
- Northington
- Upper Wield
- Ovington
Our services across SO24
- Mastic sealing for building owners and managing agents
- Expansion and movement joint sealing
- Commercial sealant contractors
- Fire-rated sealing and fire stopping
- Coloured and colour-matched sealant
- Construction and new-build mastic
- Commercial washroom and wet-area sealing
- Industrial and floor joint sealing
- Facade and window perimeter sealing
- Every service
Let us know the job and your postcode and we’ll come back with a price: call the office on 01277 525 020 or send photos by email.
Neighbouring districts
Elsewhere in Hampshire
Every town in Hampshire
Every area we cover
About commercial sealant contractors in SO24
Sealant joints are easy to overlook until one lets water in, and on a working site that usually surfaces as a leak, a stain or a complaint from occupiers. We are commercial sealant applicators for FMs, managing agents, landlords and contractors with sites in SO24. Our job is to diagnose the failure, remove the old bead and seal again using a product chosen for the movement and exposure. Most enquiries involve untidy joints in a reception, shop floor or lobby and sanitary sealant that has gone black and patchy, on window and door perimeters, kitchen worktops and splashbacks and external facade joints.
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in.
- We start with the evidence: photographs, drawings or a look on site.
- You get a fixed quote covering removal, preparation and the new sealant.
- Sequence, access and working times are settled before the first joint is touched.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- We hand back each area with its cure time and our 12-month guarantee.
What you will pay
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Why appoint us
- Work to your specification and the manufacturer’s guidance
- Constructionline member
- Fully insured, including public liability cover
- Sealing commercial buildings since 2005
Quotes
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or email us if you’d rather talk the job through.
Around New Alresford
Locally, jobs take us to sites close to Church of St John the Baptist, The Running Horse Public House and Perins School. Well-known places in the area include Barton Castle (4.3 miles north-east). Not far away are Shutts Copse.
Commercial premises across SO24
Shop fits, office refurbishments and hotel refits in towns such as New Alresford, Ropley and Bishop's Sutton all leave joints that need sealing. Visible joints call for a matched colour and a clean tooled finish.
Around the motorway corridors of the South East, business parks and industrial estates are common, and we cover SO24 along with the rest of the region.
New Alresford: A hotel such as The Swan Hotel (less than half a mile north-east of New Alresford) shows how much sealant a hospitality building has on show, from bathroom joints to the bar. Whatever the building in New Alresford, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material.
Keeping the joints sound
To get the most from the new sealant:
- On pre-2000 buildings, share the asbestos information before work starts
- Note dates and locations of sealant work for future planning
- Act on the first lifting edges rather than waiting
- Brief cleaning contractors to avoid scourers and blades on sealant
In washrooms and kitchens, extraction makes a real difference to sealant life. Extraction that isn’t working keeps the joints wet, and mould follows damp. It’s worth having fans checked while the sealant is fresh.
Sealant installed at the same time normally fails in sequence. The first failures are often a warning about the rest, so it makes sense to look at the wider elevation or block. We will tell you which sealant joints need doing first and which can wait.
Why deal with it now?
Before budgeting for new frames, cubicles or worktops, check whether it’s just the sealant. Often the fitting is sound and the joint is the only thing letting it down. Resealing typically costs far less than renewal, though we’ll tell you honestly if the element itself is the problem.
What your quote should include
- Will failed sealant be removed rather than covered?
- Which product they’ll use, and why it suits the joint
- Their approach to joint depth and backing
- Are they CHAS accredited or on Constructionline?
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
How the quote is worked out
Quotes vary with the job. Expect it to depend on:
- The site’s rules and procedures
- The size and state of each joint
- Quantities, in metres or numbers
- Access and working height
Pricing sealant joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Before you send an enquiry
Good information means a firmer quote. Helpful details to send:
- Drawings or a marked-up plan, if available
- The postcode of the building
- How the joints are reached, and at what height
- Whether an asbestos survey exists
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, give us a call on 01277 525 020 or email drawings and photos.
When it isn’t the sealant
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be any of the following:
- Suspect materials that need testing and specialist removal
- Cracking that needs a structural engineer to look at it
- Broken glass or blown double-glazed units
Questions we are asked in SO24
How long before the joints can be used?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Do you cover SO24?
Yes. SO24 is in our area, within our coverage of Greater London, South East England and Scotland. To discuss a job, call 01277 525 020 or email a schedule or drawings.
Is it OK to apply fresh sealant over existing beads?
The old bead is stripped out first. Then the joint is cleaned, primed where the maker specifies, backed to depth and resealed.
How do you choose the sealant?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Does commercial sealant work come with a guarantee?
It’s backed by our 12-month guarantee. Should anything we did fail within that period, let us know.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.