Expansion and movement joint sealing in Winchester, Hampshire
Expansion joint sealing in Winchester, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Expansion joints split through the centre of the bead
- Spalled or broken joint edges in floors and decks
- Layers of sealant in a movement joint
Need expansion joint sealing in Winchester?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Expansion joint sealing for commercial buildings in Winchester
Our movement joint work takes in walls, panels, decks and floors: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it, and we’ll confirm the choice in the quote. We work on podiums and floor movement joints, precast concrete panel joints and blockwork control joints, and the usual reasons a site gets in touch are hardened, cracked sealant on exposed facades and layers of sealant in a movement joint. Most enquiries from Winchester start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
On busy estates around towns like Winchester, joints are resealed in stages so units keep trading: aisle by aisle or deck by deck.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
What we can’t put right
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Cracking or settlement that calls for an engineer’s assessment
- Proprietary pre-formed expansion joint systems
- Broken or spalled joint edges, which need repairing before any sealant goes in
If in doubt, ring 01277 525 020 or email drawings and photos and we will say what we think.
Where we work in Winchester
- Precast concrete panel joints
- Podiums and floor movement joints
- Car park decks and ramps
- Cladding panel joints
- Blockwork control joints
- Brickwork movement joints
Also near Winchester
More services for Winchester
Where floor joints take the most wear near Winchester
Less than 3 miles from Winchester there are at least three named estates and business parks. Their warehouses, yards and car parks are exactly where joints take the most punishment. Winchester sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
Campuses like University of Winchester (to the west of Winchester) mix old and new buildings, with movement joints wherever they meet. On industrial estates such as Bar End Industrial Estate, 0.6 miles to the south-east of Winchester, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic. Large sites such as Royal Hampshire County Hospital, 0.6 miles to the west of Winchester, have car parks, service roads and long elevations with movement joints in brick and panels.
Winchester is in Hampshire. Any commercial site in Winchester is covered. 723 places across Hampshire fall within our area, Winchester among them. For work in that direction, see our Southampton page.
Anyone looking for expansion joint sealing in SO22, SO23, SO32 and SO21 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on The Square, Market Street and Market Lane and the roads nearby. Main routes into Winchester include the A31 and A32, which helps when planning parking and deliveries for the job. Just outside Winchester, we also work in Bar End (1 mile south-east), Highcliffe (1 mile east), Hyde (1 mile north), St Cross (1 mile south) and Stanmore (1 mile south-west). Bigger towns within reach include Eastleigh (6 miles south), Fareham (15 miles south), Andover (13 miles north-west), Totton (13 miles south-west), Chandler's Ford (6 miles south-west) and Hedge End (10 miles south). Among the larger centres in Hampshire is Winchester, and we take on movement joints for its commercial and public buildings.
Near you in Winchester
Recent enquiries here include premises near Peter Symonds College, The Green Man pub and Leigh House Hospital and the streets around them. For rail, the closest station is Winchester station, about 0.6 miles north. Other landmarks nearby include Winchester City Museum (less than half a mile north-east) and St John's Rooms And Chapel (less than half a mile east). Open spaces near Winchester include Winnall Moors and Twyford Down.
Quoting for work in Winchester
Before we quote, we look at:
- Which sealant the job calls for
- The size and state of each joint
- Travel to remote or island sites
- The total length or number of joints
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
Before you send an enquiry
The more we know, the firmer the quote. Helpful details to send:
- Rough lengths or quantities, or drawings if you have them
- Specification clauses that apply
- When you need the work done
- Whether an asbestos survey exists
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to speak to us on 01277 525 020 or email us.
Your questions answered
Will you take on work at estates like Bar End Industrial Estate, close to Winchester?
Yes. We cover Winchester and the area around it, including industrial estates, business parks and retail parks such as Bar End Industrial Estate. To start, just ring 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Does a site in Winchester have to shut while its joints are sealed?
Usually not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
Can you work on car park ramps and decks?
Yes. Deck and ramp joints are resealed with a trafficable sealant chosen for the movement with bays phased so the car park keeps operating.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Can you quote from photos?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs typically get a visit.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
From enquiry to sign-off
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you, and each area is checked before we leave it. In a large town like Winchester, work on busy buildings is planned area by area, keeping disruption low. Photos and drawings let us propose a sequence with the quote.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Preparing the site
- Tell us what induction or permit system the site runs
- Point out any areas we must not close
- Send any specification or drawings in advance
Request a quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Advice
Site staff or a sealant specialist?
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Aftercare for building managers
After handover, these steps help:
- Keep scrapers and ploughs from dragging across joint sealant
- Include every elevation and deck joint in periodic inspections
- Keep racking legs and heavy point loads off floor joints
- Keep product details with the building records for the next reseal
Add every elevation, deck and floor joint to your inspection round. A periodic look picks up tears and lifting before water gets in and long before edges start to break. If anything looks wrong, call the office on 01277 525 020 or email a schedule or drawings with photos.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster. Keeping the filler or sealant sound protects the floor.
How the job changes by surface
Podium joints
Podium joints often sit within a waterproofing system. Where the specification calls for sealant, we reseal, and tell you if the problem looks like the waterproofing below.
Cladding panel joints
Access to cladding joints is agreed before the price is fixed. Photos taken near the joints help us price accurately or a site visit fills the gaps.