Mastic contractors in Telscombe
Mastic packages for new-build and refurbishment projects in Telscombe and across East Sussex. CHAS accredited and fully insured, with a 12-month guarantee.
- Sealant knocked or painted over by other trades
- Missed perimeter joints on a new elevation
- Caulk cracking where joints are moving more than expected
Need construction mastic in Telscombe?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our construction mastic in Telscombe
Mastic tends to be one of the final packages before handover, so it lands at exactly the point the programme is tightest. We work as a mastic subcontractor to main contractors and developers with projects in Telscombe. Most enquiries involve frame perimeters left unsealed or poorly sealed and oversized or tapered gaps around new frames, on brick and block movement joints, internal decorators’ caulk and window and door perimeters. Searching for sealant specialists in Telscombe? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Around places like Telscombe, a lot of construction is the conversion of older buildings, and the sealant at those junctions has to cope with two materials that move differently.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Telscombe (BN10, BN2, BN7)
- Wider area
- East Sussex
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Facades, frames and programmes in Telscombe
Telscombe is within about 1 mile of the coast. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, so joint design, primers and product choice deserve extra care. Telscombe sits in one of the drier corners of the country, the South East. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so external mastic is timed for workable conditions and agreed with the site manager.
Units on estates such as Meridian Shopping Centre, 0.7 miles south-east of Telscombe, tend to be reclad and refitted as tenants change, and each job leaves cladding and perimeter joints to seal. Older buildings in the area around Telscombe, such as Monk's House (2.7 miles north-east of Telscombe), need care when sealed: the product has to suit soft or historic materials. For contractors on a campus like University of Brighton, 3.3 miles to the east of Telscombe, facade and perimeter sealing has to fit around students and term dates.
Telscombe is about 6 miles east of Brighton, in East Sussex. Our applicators travel to Telscombe for work on mastic packages, handled exactly as we handle every other area. Across East Sussex, 308 places are covered, Telscombe among them. For work in that direction, see our Brighton page, about 6 miles away.
Commercial sites across BN10, BN2 and BN7 are covered. Buildings on Tor Road, View Road and Firle Road are within our area. If your building is just outside Telscombe, we cover East Saltdean (1 mile west), Saltdean (1 mile west), Piddinghoe (2 miles east), Rodmell (2 miles north-east) and Rottingdean (3 miles west). A short drive away, we cover Eastbourne (13 miles east), Seaford (6 miles east), Lewes (5 miles north), Hailsham (12 miles east), Uckfield (12 miles north-east) and Newhaven (3 miles east).
Around Telscombe
We work on buildings around Peacehaven Community School and Smugglers Rest pub and the streets around them. Telscombe’s nearest station is Southease station, about 2.6 miles north-east of the centre. A little further out are Planet Earth Museum (2.8 miles east) and Lewes Castle (4.9 miles north). The countryside around Telscombe includes Itford Hill and Beacon Hill Local Nature Reserve.
On site: what to expect
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Work in places the size of Telscombe is planned as a single visit where we can. Clear photographs and measurements help us bring the right products.
- We price from the drawings, specification and programme you send.
- A fixed quote sets out the scope, the products and the sequence.
- Any site paperwork you need (RAMS, insurance certificate, CSCS details) is confirmed with the quote.
- Areas are sealed plot by plot or floor by floor as the trades hand them over.
- Every joint is prepared, set to depth and sealed with the specified product.
- Snags are cleared before handover and completed areas carry our 12-month guarantee.
Getting the site ready
- Tell us your opening times and when work is allowed
- Arrange parking or a loading space
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. If you have questions first, speak to us on 01277 525 020 or email the details over.
Advice
FAQs: Telscombe
Will you take on work at estates like Meridian Shopping Centre, close to Telscombe?
Yes, sites like Meridian Shopping Centre are within our area, along with the rest of Telscombe. A few photographs and the unit address let us price the work.
Can being near the sea in Telscombe affect the sealant we need?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
When can you be on site?
We’re in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
Do you take on mastic snagging only?
Yes, we can. Share the list and photographs, and a fixed quote follows.
Is Telscombe in your area?
Yes. Sites across Telscombe are covered, with one number for every area we cover.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Is colour matching possible?
That depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Owners, agents and contractors
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Cost factors for mastic packages
The price varies from site to site. Expect it to depend on:
- Which sealant the job calls for
- The total length or number of joints
- Phasing around occupants
- Travel to remote or island sites
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Sending details for a quote
It doesn’t need to be a full survey. A few details are enough to get going:
- Asbestos survey details if the building is older
- Photos of the joints, close up and from further back
- Anything awkward about access or site hours
- Specification clauses that apply
To get a fixed quote, phone 01277 525 020 or use the quote form with the site address and an outline of the work. Our quote form is another easy route.
Maintenance after handover
To get the most from the new sealant:
- Bring the mastic contractor in after the last trades are through
- Flag uneven or tapered frame gaps early
- Use the product the specification names
- Keep finished joints away from paint, plaster and scrapers
If a joint is damaged after sealing, flag it early. Snags can be picked up in a planned close-out visit as agreed in the quote.
Oversized gaps are a problem better caught early. Filling a wide gap with sealant alone sets up a failure so packing or adjustment by the installer comes first. We raise them during our first walk of the area.
What happens if it’s left?
Leaving mastic to whichever trade is fitting the element can look cheaper on paper. The result tends to be uneven finishes and arguments about who should seal what. A single mastic package gives one point of responsibility, with the same standard on every plot. For buildings in places like Telscombe, one well-planned visit beats several small ones, so it’s worth dealing with every failing joint at once.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Why us?
- One number for every site we cover
- CHAS accredited
- Joints cleaned back to sound surfaces
- RAL and finish matching where the product range allows
What sealant work can’t fix
Honesty saves time and money. New sealant won’t cure:
- Oversized gaps that need packing or adjustment by others
- Defective windows, doors or glazing units (the supplier or installer’s job)
- Rework caused by others damaging completed areas
Not sure which it is? You can give us a call on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly.
Where we work in Telscombe
- Brick and block movement joints
- Window and door perimeters
- Internal decorators’ caulk
- Floor and skirting junctions
- Cladding and panel joints
- Sanitary and kitchen joints