The Mastic Doctor team standing beside their branded vans outside an office building
Perth and Kinross · Scotland

Sealant specialists in Perth

Work needed on a sealant joint in Perth? We assess it, carry out the work and guarantee our workmanship for 12 months.

  • Messy, uneven beads from earlier work that let the building down
  • Sanitary sealant that has gone black and patchy
  • Leaks that seem to come through a sealant line
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
12-month guarantee on our workmanship.
Covering the South East & Scotland
CHAS & Constructionline
£5m public liability

Commercial sealant contractors for businesses in Perth

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Sealant applicators in Perth

Sometimes a split bead is a symptom rather than the cause. A leak near a frame edge can start in the frame, the cill or the cavity, and repeated splits in a movement joint can mean the joint is too narrow for the movement. Part of the job is telling you when the fix is something other than sealant, so nobody pays for a reseal that can’t hold. We work on movement joints in walls and floors, window and door perimeters and floor and threshold joints, and what we’re called in for most is movement joints packed with grit and debris and a top-up bead over failed sealant, now lifting. Facilities teams, main contractors and managing agents in Perth tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.

Occupied buildings in Perth need the work phased: washrooms in turn, floors in sections and entrances kept open.

In Perth, as across Scotland, outside joints are planned around the weather: external joints need dry surfaces and the right temperature, so dates are booked with some flexibility. Internal joints in washrooms, kitchens and fit-outs aren’t affected and can go ahead on wet days.

The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.

The Mastic Doctor team standing beside their branded vans outside an office building
Place
Perth (PH1, PH2)
Region
Perth and Kinross
Guarantee
12 months on every job
Price
A fixed quote before we start
Phone
01277 525 020
Last updated
3 November 2026

What affects the price in Perth

Your fixed quote is built from the real scope. It allows for:

  • How much there is to seal
  • Which sealant the job calls for
  • Travel to remote or island sites
  • Whether old sealant has to be cut out first

Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.

Before you send an enquiry

Good information means a firmer quote. When you get in touch, include:

  • A wide shot and a close-up of the area
  • Where the site is, with the postcode
  • Drawings or a marked-up plan, if available
  • The type of building and who uses it

Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. If you have questions first, call the office on 01277 525 020 or send details through our quote form.

When to bring in a specialist

What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.

Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.

On site: what to expect

Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed before the next one starts. In a Scottish town such as Perth, outside work is planned around the weather and inside work around the occupants. Send photographs or drawings and we will quote and plan to suit.

  1. We start with the evidence: photographs, drawings or a look on site.
  2. A fixed quote follows, with removal and preparation included.
  3. We agree the order of work, access windows and site hours with you.
  4. Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
  5. Depth is set with backing, then the sealant is applied, tooled and the area tidied.
  6. Completed areas are signed off with you under our 12-month guarantee.

Preparing the site

  • Let us know about inductions and permits
  • Point out any areas we must not close
  • Move anything stored against the joints

Get a fixed quote

Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.

Ask for a quote

Advice

Surface by surface

Washrooms and toilets

Black sealant in a toilet block is normally beyond cleaning. The lasting answer is removal, preparation and a new sanitary bead, planned so the building keeps enough facilities in use.

Window and door perimeters

Where frames meet the surrounding wall, sealant is the weather line. We remove the old seal, prepare the faces, fit backing where needed and seal again with a product chosen for both the frame and the wall.

Common questions from Perth clients

Do you cover business parks and estates near Perth, such as St Catherine's Retail Park?

Yes. We cover Perth and the area around it, including industrial estates, business parks and retail parks such as St Catherine's Retail Park. Photos and a short description are enough for a first look.

Can you match sealant colours for premises in Perth?

Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photographs and we’ll confirm what’s available for the product.

How do you keep disruption to occupiers down?

Most of the buildings we work in stay occupied. Only the area being sealed is closed, and the sequence is agreed in advance, until its cure time has passed.

Are you CHAS accredited and on Constructionline?

Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.

Which site documents can you send us?

Let us know your requirements when you ask for a price, and the paperwork is confirmed with the quote. From you, we will need the asbestos information for older buildings and any site rules.

When can the area be used after sealing?

Curing time varies by product, and we confirm it on the day.

Will your applicators have CSCS cards?

Yes. If you need card details for site access, tell us and we will confirm them with the quote.

Common problems we fix in Perth

A good share of the joints we inspect were topped up instead of being renewed. New silicone has nothing to key into so it soon peels and traps moisture against the joint. By the time it shows, there can be two or three layers to cut out.

These are often picked up first by site or facilities staff:

  • Hardened, chalky sealant on south-facing or exposed elevations
  • Smeared sealant across finishes from a rushed job
  • Wall and floor joints that have lost their seal
  • A top-up bead over failed sealant, now lifting

Retail sites such as St Catherine's Retail Park (less than half a mile east of Perth) are typical of where shop-fit joints, frontages and staff areas need neat, colour-matched sealant.

Questions to ask before you book

  • Which product they’ll use, and why it suits the joint
  • How they handle RAMS and site documents
  • How they’ll work around occupants
  • Are they CHAS accredited or on Constructionline?

How to choose a sealant contractor

What happens if it’s left?

Some low prices are low because nothing gets cut out. New sealant laid on old silicone has nothing to bond to, so it peels. Our prices always include removal of the failed bead and full joint preparation. A leaking joint can damage finishes, stock and fittings inside. Early action limits what needs repairing.

The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.

Why us?

  • Colour options checked against the specified product
  • Colours chosen to suit frames, cladding or finishes where possible
  • Fully insured
  • Health and safety: CHAS accredited

Read our cost guide and our accreditations.

Commercial sealant contractors in Perth: the local picture

A 2-mile radius around Perth takes in plenty of hotels. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes, and the work can be phased so the rest of the hotel keeps trading. There are 13 care or nursing homes within about 2 miles of Perth. Care homes need tidy, cleanable joints in kitchens, corridors and communal rooms.

In hotels such as The Lovat Hotel, which lies south of Perth, refurbishments normally mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes. If you have premises on more than one site, say at St Catherine's Retail Park and Inveralmond Business Centre, one contractor and one quote can cover both.

Perth is about 33 miles north of Edinburgh, in Perth and Kinross. Businesses, contractors and managing agents in Perth can call on us for sealant joints, as part of our coverage of Perth and Kinross. Our Perth and Kinross coverage takes in 114 places, large and small. There’s a separate page for Dundee, about 19 miles away.

Postcode districts covered here: PH1 and PH2 for sealant joints. Among the streets we cover are Simpson Square, High Street and Moredun Square, and sites on any of them can send details for a fixed quote. Being close to the A9 and A85, Perth is straightforward for us to reach. Sites close to Perth are covered too, including Oakbank (1 mile south-west), Scoonieburn (2 miles south-east), Tarsappie (2 miles south-east), Milltown of Aberdalgie (3 miles south-west) and Forgandenny (4 miles south). Nearby towns on our patch include Blairgowrie and Rattray (14 miles north), Crieff (15 miles west), Auchterarder (12 miles south-west), Kinross (13 miles south), Coupar Angus (12 miles north-east) and Rattray (14 miles north). As one of the bigger centres in Perth and Kinross, Perth has a broad mix of commercial, public and industrial buildings, and we cover them all.

Around Perth

In Perth, that means premises near North Inch, Public House and St John's Academy, among other places. The nearest railway station is Perth station, about 0.7 miles south-east. Well-known places in the area include Murray Royal Hospital (1.2 miles east) and Balhousie Castle (0.6 miles north-east). The countryside around Perth includes St Magdalene's Hill.

Map of Perth © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.