Coloured and colour-matched sealant in Old Struan, Perth and Kinross
Coloured and colour-matched sealant for visible joints in Old Struan and across Perth and Kinross. CHAS accredited and fully insured, with a 12-month guarantee.
- Smeared sealant on stone or joinery
- Previous reseals that don’t match the original
- Standard-colour sealant spoiling a high-end finish
Coloured sealant in Old Struan
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our coloured sealant in Old Struan
A colour-matched bead still has to work as a seal. Faces are prepared, depth is fixed with rod and the bead is tooled onto two sides only. Careful masking keeps the edges crisp. We work on shop-fit joinery and counters, powder-coated and anodised frames and office fit-out finishes, and what we are called in for most is old sealant that has yellowed, darkened or faded and poorly tooled joints on visible finishes. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Old Struan is the same: the right product in a properly prepared joint.
For work in and around Old Struan, we’d rather do everything on one trip: send photos and a complete list so the right products and colours come on the day. If neighbouring businesses have work too, the visits can be grouped.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Old Struan (PH18)
- Wider area
- Perth and Kinross
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Coloured sealant around Old Struan: what changes locally
The east of Scotland, where Old Struan is, gets less rain than the west. Cold, frosty mornings and condensation on steel and glass can still delay outside work. Outside work is booked with that in mind
For any commercial premises in Old Struan, a lasting joint depends on full removal of the old sealant and clean, dry faces. Shops and cafés around stations like Blair Atholl station, 3.9 miles east of Old Struan, trade from early, so work is timed around them.
Old Struan is about 26 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Any commercial site in Old Struan is covered. Our Perth and Kinross coverage takes in 114 places. There’s a separate page for Dundee, about 42 miles away.
We take on colour-matched joints across the PH18 postcode area. Just outside Old Struan, we also work in Old Blair (4 miles east), Bridge of Tilt (4 miles east), Blair Atholl (4 miles east), Trinafour (5 miles west) and Moulin (9 miles east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Around Old Struan
The closest station to Old Struan is Blair Atholl station, roughly 3.9 miles east of the centre. Well-known places in the area include Clan Donnachaidh Museum (0.9 miles north-east) and Blair Castle (3.7 miles east). For a walk, there’s Creag Odhar and Loch Bhac.
When something else is needed
Before quoting, we check that sealant is the right answer. It won’t put right:
- Paintable products in joints they aren’t suited to
- Restoring stained stone or masonry next to old sealant
- Materials with mixed tones that defy a single match
Not sure which it is? You can call the office on 01277 525 020 or email drawings and photos and we’ll tell you honestly before you book.
Where we work in Old Struan
- Office fit-out finishes
- Hotel bathrooms and public areas
- Natural stone and brick
- Cladding panels
- Powder-coated and anodised frames
- Shop-fit joinery and counters
Towns and villages near Old Struan
What else we do in Old Struan
Looking after the joints
After handover, a little attention goes a long way:
- Clean coloured joints with mild products
- Protect fresh coloured sealant from dust and handling
- Keep the colour details for future repairs
- Ask contractors to check the colour before resealing
Let the joints cure as the manufacturer advises before they’re cleaned. Fresh coloured beads show fingerprints and dust more easily, so keep the area clear.
Approve a sample where colour really matters. A sample in real light shows how it will look.
Questions we are asked in Old Struan
Do you offer colour-matched sealant for buildings in Old Struan?
Yes, we can usually get close to most finishes from the product’s colour range. Available colours for the product are confirmed with the quote.
What paperwork can you provide for a job in Old Struan?
We’ll confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We are CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
How much does the work cost?
There isn’t a price list, because every site is different. Send photos or drawings and we’ll price it at a fixed figure.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Why act early in Old Struan
Matching new joints to the existing ones is easier when the whole run is done together. Small repairs at different times rarely match, and the patchwork effect grows. Around smaller places like Old Struan, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why appoint us
- 12-month guarantee on workmanship
- Clear, fixed quotes
- Work to your specification and the manufacturer’s guidance
- Colour options checked against the specified product
Take a look at how commercial sealant jobs are priced or how we’re accredited.
What the job involves on each surface
Powder-coated and anodised frames
Metallic and anodised finishes are hard to match exactly with sealant. We will suggest the nearest standard colours so you can choose.
Office fit-outs
Partition frames and joinery are often in a set colour. We match from the product’s range as specified.
General trades versus a specialist
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Where we can, we combine work around Old Struan with other jobs nearby. Let us know if your dates have any give.
- We confirm the product the joint needs before talking about colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We remove the existing bead, clean the faces and set the depth.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
What we need from you
- Point out any areas we must not close
- Explain the parking and delivery arrangements
- Tell us what induction or permit system the site runs
Request a quote
For a fixed quote, speak to us on 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.