Coloured Sealant contractors in New Addington
Coloured and colour-matched sealant for visible joints across New Addington, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- A run of joints in mismatched shades
- White or grey sealant that clashes with the finish
- Old sealant that has yellowed, darkened or faded
Coloured sealant in New Addington
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant in New Addington
Where finishes matter, a white or grey bead in the wrong place stands out. Our coloured sealant work blends joints into the surrounding materials, from powder-coated frames to stone and brick. Performance decides the product; the colour is chosen from that product’s range. If you are dealing with discoloured joints on a visible elevation and standard-colour sealant spoiling a high-end finish, we can help, whatever the surface. For commercial sealant work in New Addington, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Around New Addington, as across the capital, commercial buildings range from converted period premises to recent office and mixed-use blocks, so one job can involve stone, brick, powder-coated frames and laminate in a single visit. The right product goes on each, in a colour chosen to suit where the joint is seen.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- New Addington (CR0, CR9)
- Wider area
- Greater London
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Keeping the joints sound
A few simple habits keep the new joints working:
- Protect fresh coloured sealant from dust and handling
- Record the product and colour reference on the building file
- Approve a sample bead on high-profile areas
- Avoid piecemeal repairs on coloured joints
Keep a record of the product and colour reference used. Future repairs can then use the same colour, avoiding a patchwork.
Share the colour reference with anyone working on the finishes. It stops mismatched repairs creeping in.
Cost factors for colour-matched joints
Your fixed quote is built from the real scope. It takes account of:
- Site requirements such as inductions and permits
- How much existing material needs removing
- Backing rod, priming and other preparation
- The product specified
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
Before you send an enquiry
The more we know, the firmer the quote. Helpful details to send:
- The product your specification calls for
- The type of building and who uses it
- The asbestos register, for older buildings
- Where the site is, with the postcode
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Frontages, fit-outs and joints in New Addington
A 2-mile radius around New Addington takes in several hotels. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes, with rooms done in turn while the rest stay let. Less than 3 miles from New Addington there are at least three named estates and business parks. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal, often in a colour the occupier specifies.
Sites a few miles apart, such as Vulcan Way Industrial Estate and Glebe Farm Business Park, can share one programme and one point of contact. Industrial estates such as Vulcan Way Industrial Estate, 0.6 miles east of New Addington, have offices, trade counters and welfare areas whose sealant ages like any other building’s. New Addington is inside London’s ULEZ, as is the rest of Greater London; tell us about loading bays, goods lifts and parking when you send details.
New Addington is about 4 miles south-east of Croydon, in Greater London. If you are looking for coloured sealant in New Addington, we can help. Our Greater London coverage takes in 764 places, large and small. Our London page has more on work in that area, about 11 miles away.
We take on colour-matched joints across the CR0 and CR9 postcode area, whatever the building. If your site is on Bothwell Road, Windham Avenue and Gascoigne Road or close by, we can quote for colour-matched joints. Nearby places we also cover include Forestdale (1 mile west), Fickleshole (1 mile south), Addington (1 mile north-west), Farleigh (1 mile south-west) and Selsdon (2 miles west) for colour-matched joints. Nearby towns on our patch include London (11 miles north), City of Westminster (13 miles north-west), Marylebone (13 miles north-west), Kensington (14 miles north-west), St Pancras (13 miles north) and Shoreditch (13 miles north).
What’s near New Addington
Recent enquiries here include premises near Meridian High School and Addington Vale. For rail, the closest station is Hayes (Kent) station, about 2.6 miles north-east. Nearby you will also find Warlingham Park Hospital (1.8 miles south) and Bethlem Museum of the Mind (3.3 miles north-east). Not far away are Nore Hill and Hutchinson's Bank.
Common questions from New Addington clients
Do hotels near New Addington have to close for sealant work?
Almost never. The work is phased so most rooms stay available. The plan is built around your bookings.
Can you work at a site such as Vulcan Way Industrial Estate, by New Addington?
Yes. Our area takes in New Addington and its surroundings, with estates and business parks such as Vulcan Way Industrial Estate included. To start, just ring 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
How long will the new sealant last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Can we approve the colour on site?
Yes. Where colour is critical, we can agree a short sample bead in a discreet spot. The colour can shift a little as it cures, so it’s worth checking in real light.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Do you use coloured sanitary silicone?
Yes. Wet-area sealants are made in colours as well as white. We will confirm what’s available for the specified product.
Owners, agents and contractors
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.
Diagnose, treat, sign off
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Most London premises stay occupied while we’re on site, so we agree zones and timings with the building or facilities manager. Phased work keeps the rest of the building in use.
- The sealant type is chosen for the joint first, then the colour.
- Colour references, samples or photos of the finish are checked against the product’s range.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We remove the existing bead, clean the faces and set the depth.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
Before we start on site
- Let us know about inductions and permits
- Confirm the product named in the specification
- Warn occupants and staff about the work
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Related advice
Why it’s worth doing now in New Addington
A failed joint lets in water and dirt, whatever colour it is. Water through a split seal can stain or damage the surfaces next to it, so resealing protects the finishes as well as the look. Failed sealant in a building in New Addington can quickly affect neighbours, tenants or the floor below. Putting it right early is less disruptive than dealing with the consequences.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote.
Why appoint us
- Health and safety: CHAS accredited
- A fixed quote before work starts
- Our applicators hold CSCS cards
- Commercial sealant work since 2005