The Mastic Doctor team standing beside their branded vans outside an office building
Edinburgh · Scotland

Coloured and colour-matched sealant in Mayfield, Edinburgh

Coloured and colour-matched sealant for visible joints across Mayfield, by CSCS-carded applicators. CHAS accredited and fully insured.

  • Smeared sealant on stone or joinery
  • Previous reseals that don’t match the original
  • Coloured joints that have cracked with movement
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
Covering the South East & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Coloured sealant in Mayfield

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Coloured sealant for commercial buildings in Mayfield

Stone, brick and cladding each bring their own colour challenge: a stone or brick facade shifts in tone from one area to the next. The aim is a sealant colour that sits comfortably against the whole surface, with a sample on site if colour is critical. If you are dealing with old colour-matched joints lifting at the edges and joints that need to match a new RAL frame colour, we can put it right. Whoever orders the work in Mayfield, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.

In Scotland’s cities, commercial premises are packed closely, from stone-fronted offices to shops on the ground floor of tenement blocks. Shop units under tenements can bring the property factor into the picture when the work touches shared parts.

Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.

The Mastic Doctor team standing beside their branded vans outside an office building
Place
Mayfield (EH9, EH16, EH8)
Region
Edinburgh
Guarantee
12 months on our workmanship
Quotes
Quoted before any work starts
Call
01277 525 020
Page updated
3 November 2026

Aftercare for building managers

Cleaning and maintenance staff play a part too. Pass these on to them:

  • Protect fresh coloured sealant from dust and handling
  • Standardise colours across a portfolio
  • Keep harsh solvents away from visible joints
  • Keep the colour details for future repairs

Expect some change in appearance over the years. That is normal for exposed sealant, and resealing restores the look when the time comes.

Share the colour reference with anyone working on the finishes. It stops mismatched repairs creeping in.

Honest limits

Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:

  • A guaranteed perfect match to every finish
  • Restoring stained stone or masonry next to old sealant
  • Stopping sealant from ever changing colour outdoors

If you’re not sure, just call the office on 01277 525 020 or use the quote form and we’ll give you a straight answer.

Where we work in Mayfield

  • Powder-coated and anodised frames
  • Office fit-out finishes
  • Cladding panels
  • Shop-fit joinery and counters
  • Natural stone and brick
  • Hotel bathrooms and public areas

Common questions from Mayfield clients

Will you take on work at estates like Blackford Business Park, close to Mayfield?

Yes. We cover Mayfield and the area around it, including industrial estates, business parks and retail parks such as Blackford Business Park. Send details of the unit and the work through our quote form for a quick quote.

Can being near the sea in Mayfield affect the sealant we need?

It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.

How do we ask for a quote?

You can use the quote form on this site; alternatively, call the office on 01277 525 020 or email drawings and photos. Include photos or drawings if you have them.

When can you be on site?

Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.

Which sealant will you use?

The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.

Is it fine to apply new sealant on top of old?

No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.

Will the colour fade over time?

It can, to a degree. Exposure, product and colour all play a part, so no colour stays exactly the same for ever.

Leave it or put it right?

A mismatched or discoloured bead is a small detail that buyers, guests and clients notice. Resealing in a suitable colour is a modest cost against the finishes it sits beside, and the difference is obvious. Getting access arranged for a building in Mayfield takes time, so deal with all failing joints while access is up.

Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.

What you get with us

  • One contact handling all your sites
  • Specification-led, product-correct work
  • CSCS-carded applicators
  • A Constructionline member, so easy to vet

See what affects the cost or our accreditations and insurance.

Sealant on show in Mayfield’s commercial buildings

Mayfield lies within about 3 miles of the sea. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. We choose a product rated for the exposure, then confirm the colours available for it. Less than 3 miles from Mayfield there are at least three named estates and business parks. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal.

In hotels such as Rosehall Hotel (less than half a mile north of Mayfield), refurbishments usually mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes. A business with units at Blackford Business Park and Peffermill Industrial Estate needn’t use two contractors for its sealant.

Mayfield is about 2 miles south-east of Edinburgh, in Edinburgh. Anywhere in EH9, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Mayfield is one of 174 places we cover in Edinburgh.

We take on colour-matched joints across the EH9, EH16 and EH8 postcode area, for business premises of every kind. For a building on Lady Road, Lygon Road and Granby Road or nearby, we can quote for colour-matched joints. Access to Mayfield is via the A7. Nearby places we also cover include Prestonfield (1 mile east), Newington (1 mile north-west), Cameron Toll (1 mile south-east), St Leonard's (1 mile north) and Burgh Muir (1 mile west) for colour-matched joints. Nearby towns on our patch include Leith (3 miles north), Bonnington (3 miles north), North Leith (3 miles north), Queensferry (9 miles north-west), Timber Bush (3 miles north) and Comely Bank (3 miles north-west).

Local landmarks in Mayfield

Recent enquiries here include premises near Peffermill Playing Fields, Leslie's Bar and National Museums Scotland Library and the streets around them. Nearby too are Sciennes Primary School (0.7 miles north-west), Duddingston Kirk (1 mile north-east) and St Margaret's School (less than half a mile south-east). The nearest railway station is Edinburgh Waverley station, roughly 1.5 miles north-west of the centre. Other landmarks nearby include Cameron Toll Shopping Centre (0.5 miles south-east) and Craigmillar Castle (1.3 miles south-east). Green spaces nearby include The New Leaf Co-op and Duddingston Loch.

Map of Mayfield © OpenStreetMap contributors

How a job runs

The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. For premises in Mayfield, tell us about access times, shared entrances and any building rules, so the work can be phased and areas kept in use.

  1. The sealant type is chosen for the joint first, then the colour.
  2. Colour references, samples or photos of the finish are checked against the product’s range.
  3. Where colour is critical, a sample bead can be agreed in a discreet spot.
  4. We remove the existing bead, clean the faces and set the depth.
  5. We apply the agreed colour and tool it neatly, with masking where the finish needs it.

Before we start on site

  • Clear stock, furniture or equipment away from the joints
  • Warn occupants and staff about the work
  • Share the asbestos register for older buildings

Get a fixed quote

Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to ring 01277 525 020 or email drawings and photos.

Get a price

Related advice

Work for main contractors and building owners

Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.

Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, with CSCS-carded applicators on site.

Do you need coloured sealant in Mayfield?

Patch repairs in a different colour are a common problem. Mixed repairs over time leave a run of mismatched joints along a shopfront. Resealing a whole run in one agreed colour tidies it up.

Common reasons buildings call us in:

  • Failed coloured sealant that has split or peeled
  • Stained or mouldy coloured joints in washrooms
  • A bead that fights the cladding or frame colour
  • Untidy coloured beads with ragged edges

For tenants and agents on sites such as Blackford Business Park, which lies south-west of Mayfield, office fit-outs, reception joints and window perimeters are the usual sealant work.

What your quote should include

  • Their plan for phasing and protecting the area
  • The named product and why it was chosen
  • How the joint faces will be prepared and primed
  • How joint depth will be controlled

How to choose a sealant contractor

Accreditations

Trusted. Accredited. Insured.