Coloured and colour-matched sealant in Logie, Dundee
We carry out coloured and colour-matched sealant for visible joints in Logie and the surrounding area. Send photos or drawings for a fixed quote.
- Weathered sealant that no longer matches
- A run of joints in mismatched shades
- Stained or mouldy coloured joints in washrooms
Need coloured sealant in Logie?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle coloured sealant in Logie
Stone, brick and cladding each bring their own colour challenge: a stone or brick facade shifts in tone from one area to the next. The aim is a sealant colour that sits comfortably against the whole surface, agreed on site where needed. If you have discoloured joints on a visible elevation and a bead that fights the cladding or frame colour, we can put it right, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Logie is the same: the right product in a properly prepared joint.
In Scotland’s cities, commercial premises are packed closely, from stone-fronted offices to shops on the ground floor of tenement blocks. Where a shop sits below tenement flats, work on the frontage or shared parts may involve the property factor.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Logie (DD2, DD1, DD3)
- Region
- Dundee
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Pass on the site’s contractor rules when you get in touch.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- You approve the colour, on site if it’s critical.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
Preparing the site
- Confirm the product named in the specification
- Tell staff and tenants when we’ll be in
- For older buildings, check the asbestos register before work
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to ring 01277 525 020 or email drawings and photos.
Read more
Nearby places to Logie
What else we do in Logie
Why deal with it now?
People notice sealant lines more than you might expect, especially in shop fits and hotels. Putting it right costs little compared with the finishes around it. In a tenement or shared city building, water from a failed joint can reach other owners’ property. Fixing it promptly keeps repairs small.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why clients in Logie choose us
- 12 months’ guarantee on every job
- CHAS accredited contractor
- Constructionline member for supplier checks
- Colours chosen to suit frames, cladding or finishes where possible
Take a look at our cost guide or how we’re accredited.
Building owners, agents and FMs in Logie
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Questions we are asked in Logie
Is Mid Wynd Industrial Estate, near Logie, within your area?
Yes, sites like Mid Wynd Industrial Estate are within our area, along with the rest of Logie. Photos and a short description are enough for a first look.
Must a hotel around Logie close while you work?
Almost never. The work is phased so most rooms stay available. We agree the order of rooms and the timings with you before we start.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Do you cover Logie?
Yes. Logie is in our area. For a quote, call the office on 01277 525 020 or email us.
How many days will you need on site?
The duration is planned around your programme and the access we’re given. We will give you an estimate of time on site when we quote.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Commercial premises in Logie
Logie is within about 1 mile of the coast. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. A matched colour is only half the brief on an exposed frontage. At least three named trading, business or retail sites lie within about 3 miles of Logie. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints, often in a colour the occupier specifies.
A business with units at Mid Wynd Industrial Estate and Ardyle Industrial Estate needn’t use two contractors for its sealant. For a shop at a centre such as Overgate Centre, 1.1 miles to the east of Logie, tidy joints at counters and displays matter as much as the fixtures. In hotels such as Shaftesbury Hotel, less than half a mile south of Logie, refurbishments typically mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
Logie is about 1 mile south-west of Dundee, in Dundee. Commercial clients in Logie use us for work on colour-matched joints, as part of our coverage of Dundee. We work across 28 places in Dundee, from busy centres to rural villages.
Work on colour-matched joints is covered throughout DD2, DD1 and DD3. For a building on City Road, Ancrum Road and Tait's Lane or nearby, we can quote for colour-matched joints. Sites close to Logie are covered too, including Balgay (1 mile north-west), Lochee (1 mile north), Menzieshill (1 mile west), Dryburgh (1 mile north-west) and Ninewells (1 mile west). A short drive away, we cover Broughty Ferry (5 miles east), Barnhill (6 miles east), Pitkerro (3 miles north-east), Whitfield (3 miles north-east), Douglas (4 miles east) and Mill of Mains (3 miles north-east).
Local landmarks in Logie
We work on buildings around Dundee School of Architecture, The Hawkhill Tavern and Balgay Hill, among other places. Logie’s nearest station is Dundee station, about 1.3 miles east. Other landmarks nearby include Dudhope Castle (0.7 miles east) and Tayside Medical History Museum (less than half a mile east). For a walk, there’s Balgay Hill and Trottick Mill Ponds.
How the quote is worked out
To price the job, we consider:
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
- Backing rod, priming and other preparation
- Working within restricted access windows
The price depends on the quantity of joints, what has to come out first and the access. Call for a quote once you have the details.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Photos of the joints, close up and from further back
- Whether the building will be occupied during the work
- The postcode of the building
- Approximate linear metres or a joint schedule
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to give us a call on 01277 525 020 or email drawings and photos with what you know.
Maintenance after handover
Problems stay small when the joints are checked regularly. Specifically:
- Reseal whole runs rather than patching single joints
- Approve a sample bead on high-profile areas
- Keep the same sealant colour across a brand
- Don’t let trades patch coloured joints with a random sealant
Include coloured sealant in planned building checks. Look for splits, lifting edges and staining.
Plan resealing of visible joints before they look tired. A planned reseal avoids a run of patch repairs across the building.
Different surfaces, different methods
Hotel interiors
Phased resealing lets rooms go back into use quickly. Tell us your site hours and access windows and we will plan around them with areas kept in use.
Office fit-outs
In offices, sealant appears at partitions, tea points, washrooms and reception desks. Colour-matched joints keep the finish consistent across floors at handover.