Mastic sealant contractors in Kenmore
Mastic sealing in Kenmore, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Open joints in brickwork or panels
- Damaged joints in communal entrances and corridors
- Water getting in round frames after rain
Need mastic sealing in Kenmore?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Mastic sealing in Kenmore
In buildings from before 2000, some old mastics contain asbestos. Before we disturb it, we ask to see the asbestos register or survey and if it’s suspected, work stops until it’s tested. We don’t remove asbestos-containing materials. We work on communal kitchens and washrooms, external wall and movement joints and communal entrances and stairwells, and the usual reasons a site gets in touch are patchy repairs in mismatched sealant and leaks at window and door perimeters. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Kenmore, that means joint design, primers and backing rod as standard.
Around smaller places such as Kenmore, buildings managed by landlords and associations are often small groups of flats, sheltered housing and halls. Frames on exposed elevations are where mastic normally fails first.
A 12-month guarantee applies to all our work. If an installation problem shows up, give us a call on 01277 525 020 or email a schedule or drawings and we will arrange a return visit.
- Where
- Kenmore (PH15)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Kenmore can sit alongside others in a wider programme across Perth and Kinross.
Quoting for work in Kenmore
A fixed quote reflects the actual work. It allows for:
- The site’s rules and procedures
- Backing rod, priming and other preparation
- Distance, for remote addresses
- How accessible the joints are
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
Sending details for a quote
Good information means a firmer quote. Helpful details to send:
- Whether the building will be occupied during the work
- Whether an asbestos survey exists
- Photos of the joints, close up and from further back
- The product your specification calls for
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to phone 01277 525 020 or email the details over.
Different surfaces, different methods
Communal areas
Communal entrances, stairwells and corridors have joints at door frames, screens, skirting and floor edges. Fresh joints make shared areas look looked after.
Estate-wide resealing programmes
Consistent products and colours across an estate make future maintenance simpler and easier to manage.
Our process
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Tell us who will meet us and how to get in at your building near Kenmore. We’ll confirm the plan with the fixed quote.
- A building-by-building inspection lists the failed joints.
- The quote is fixed and split as suits you.
- Dates and areas are agreed so occupiers can be told.
- Old mastic is removed and the joint faces prepared.
- New sealant goes in with backing rod and primer where needed.
- We check the finished work and confirm the guarantee.
Before we start on site
- Send asbestos survey details if the building is pre-2000
- Agree which areas must stay open
- Confirm the product named in the specification
Get a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Advice
Also near Kenmore
Other services in Kenmore
Questions we’re asked in Kenmore
Can you quote for mastic across several buildings in and around Kenmore?
Yes. Portfolio-wide programmes are a regular request. Send the addresses and photographs and we will give a fixed quote.
Is Kenmore too small for you to travel to?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
Can you send RAMS and CSCS details before starting?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote. We are CHAS accredited and a Constructionline member.
Do you work for managing agents and housing associations?
We do. Managing agents, property factors in Scotland, housing associations and landlords with block or commercial portfolios are our main clients for this work, and we quote building by building or as a programme.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day.
Doing it in-house
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Planned mastic for Kenmore portfolios
The east of Scotland, where Kenmore is, gets less rain than the west. Frost and condensation on winter mornings can still delay outside mastic.
Wherever your building is in or near Kenmore, we look at the whole elevation before quoting, so you know what needs doing now. Owners near Kenmore can renew frame and external mastic block by block on one programme.
Kenmore is about 24 miles north-west of Perth, in Perth and Kinross. Anywhere in PH15, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Kenmore is one of 114 places in Perth and Kinross on our list. Dundee is covered too, around 40 miles from Kenmore.
Work on mastic joints is covered throughout PH15, for business premises of every kind. We cover commercial and managed buildings on The Square, Taymouth Drive and Pier Road. Nearby places we also cover include Acharn (1 mile south-west), Fearnan (3 miles west), Boreland (4 miles west), Aberfeldy (6 miles north-east) and Little Ballinluig (9 miles north-east) for mastic joints.
Local landmarks in Kenmore
Nearby you will also find Scottish Crannog Centre (0.5 miles south-west) and Taymouth Castle (under half a mile north). For a walk, there’s Drummond Hill.
Aftercare for building managers
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Keep bins and bikes away from communal door frames
- Ask residents or tenants to report leaks and draughts early
- Plan resealing building by building rather than complaint by complaint
- Include mastic in your cyclical inspections
Protect entrance and corridor joints from knocks where possible. Damage at low level is the most common reason communal joints fail early.
Mastic fails gradually, then all at once in a wet spell. Resealing when cracking first shows avoids water damage and the complaints that come with it.