The Mastic Doctor team standing beside their branded vans outside an office building
Scottish Borders · Scotland

Coloured and colour-matched sealant in Sprouston, Scottish Borders

Need coloured sealant in Sprouston? It’s simple: send details, get a quote, we seal, guaranteed.

  • Dirty, discoloured joints in public areas
  • Colour changes after a rebrand or refit
  • Failed coloured sealant that has split or peeled
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
12-month guarantee on our workmanship.
London, the South East & Scotland
CHAS accredited
£5m PL insurance

Coloured sealant across Sprouston

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Questions we are asked in Sprouston

Do you cover business parks and estates near Sprouston, such as Rosewood Industrial Estate?

Yes, sites like Rosewood Industrial Estate are within our area, along with the rest of Sprouston. Send details of the unit and the work through our quote form for a quick quote.

Is Sprouston too far out for you?

Not at all: smaller places are covered as well as towns. We work across every Scottish council area. Good photos up front let us bring everything on the first visit.

Do you use coloured sanitary silicone?

Yes, where the product range allows. Coloured sanitary sealant suits tiled and stone wet areas in commercial interiors.

How do you choose the sealant?

Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.

How do we ask for a quote?

The quote form is the simplest route, though you can also call 01277 525 020 or email us. Include photographs or drawings if you have them.

What if there’s asbestos in the old mastic?

Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.

Do you need to see the site first?

It depends on the job. Simple work can often be priced from photos, and bigger or more complex jobs usually get a visit.

Coloured sealant in Sprouston, done properly

Shop fits, hotels and offices are where colour-matched sealant earns its place. A grey bead on a black shopfront or a white line against oak looks like a defect, however well it was installed. We pick a colour from the product’s range that sits with the finish. We work on office fit-out finishes, natural stone and brick and hotel bathrooms and public areas, and the failures we’re asked to look at most are fit-outs with a sealant colour in the specification and old colour-matched joints lifting at the edges. For commercial sealant work in Sprouston, you deal with one contact from quote to sign-off, whether it’s one building or several.

Around smaller places such as Sprouston, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Each has kitchens, washrooms and frames that depend on sound joints.

The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.

The Mastic Doctor team beside their liveried vans in front of an office building
Location
Sprouston (TD5)
Region
Scottish Borders
Guarantee
12 months on every job
Quotes
Quoted before any work starts
Phone
01277 525 020
Updated
3 November 2026

Looking after the joints

Keep the joints in good shape with a few simple steps:

  • Agree the sealant colour early and write it into the specification
  • Protect fresh coloured sealant from dust and handling
  • Look at the cured colour before the full run
  • Keep harsh solvents away from visible joints

If other trades disturb a coloured joint, ask them to tell you rather than patch it. Wrong-colour patches are obvious.

Settle the colour early in the project. Late decisions lead to substitutes and mismatches.

Cost factors for colour-matched joints

Your fixed quote is built from the real scope. It allows for:

  • Working within restricted access windows
  • Which sealant the job calls for
  • Access and working height
  • How much existing material needs removing

Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.

Sending details for a quote

A good diagnosis starts with the right details. Let us know:

  • How the joints are reached, and at what height
  • Asbestos survey details if the building is older
  • Where the site is, with the postcode
  • Whether the building will be occupied during the work

Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or email us.

Why act early in Sprouston

A standard colour is quicker to source, though not always right. On visible work, the small extra effort of a colour from the product’s range pays off at handover. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Sprouston, a repair visit takes planning, so it’s better to act early.

Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.

Why us?

  • Colour agreed before work starts
  • Workmanship guaranteed for 12 months
  • One phone line for London, the South East and Scotland
  • Constructionline member for supplier checks

Read our cost guide and our accreditations and insurance.

Diagnose, treat, sign off

Tell us your site hours and access windows and we’ll plan around them. While we’re working, the area stays contained and tidy, and your contact hears from us before we move to the next area. For work around Sprouston, we aim for one trip, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.

  1. We confirm the product the joint needs before talking about colour.
  2. We compare your RAL reference or sample with the colours made for that sealant.
  3. A short trial length can be approved before the full run on visible work.
  4. We remove the existing bead, clean the faces and set the depth.
  5. The coloured sealant is applied and tooled with clean, masked edges.

Before we start on site

  • Let us know about inductions and permits
  • Tell us your opening times and when work is allowed
  • Make sure the joints can be reached

Getting a fixed quote

A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.

Get a price

Read more

How the job changes by surface

Paintable sealants

Where no colour in the range is close, a paintable hybrid or PU sealant can sometimes be painted to match. That only works where the joint and specification allow it because paint may crack where the joint moves.

Powder-coated and anodised frames

Window, door and shopfront frames in RAL colours often need a sealant to suit. The frame colour is checked against what the product is made in, and the nearest option is agreed.

Should maintenance staff do it?

Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.

For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.

Working on commercial sites near Sprouston

Sprouston has several hotels close by, all within 2 miles. In hotels, sealant shows everywhere, from bathroom joints to reception counters, so colour and a clean finish matter, and the work can be phased so the rest of the hotel keeps trading. Less than 3 miles from Sprouston there are at least three named estates and business parks. Sites like these see regular refits, with shopfronts, offices and staff areas to seal.

Sites a few miles apart, such as Rosewood Industrial Estate and Pinnacle Hill Industrial Estate, can share one programme and one point of contact. If you run a unit on an estate such as Rosewood Industrial Estate, 1.3 miles to the west of Sprouston, the trade counter, offices and staff facilities have joints to look after as well as the warehouse.

Sprouston is about 16 miles east of Galashiels, in the Scottish Borders. Businesses, contractors and managing agents in Sprouston can call on us for colour-matched joints. Sprouston is one of 91 places in the Scottish Borders on our list for colour-matched joints. For work in that direction, see our Edinburgh page.

Postcode districts covered here: TD5. Buildings on Dean Road and Deanfield are within our area for colour-matched joints. If your building is just outside Sprouston, we cover Kelso (2 miles west), Ednam (2 miles north-west), Stichill (3 miles north-west), Heiton (4 miles south-west) and Eccles (4 miles north). A short drive away, we cover Jedburgh (11 miles south-west), Duns (12 miles north), Melrose (13 miles west), Earlston (11 miles west), Langlee (15 miles west) and St Boswells (10 miles west).

Local landmarks in Sprouston

Other landmarks nearby include Roxburgh Castle (2.8 miles west) and Kelso Hospital (1.8 miles west). Open spaces near Sprouston include Hoselaw Loch and Din Moss and Hoselaw Loch.

Map of Sprouston © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.