Hirst coloured sealant
Coloured sealant in Hirst, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Weathered sealant that no longer matches
- Colour changes after a rebrand or refit
- Old colour-matched joints lifting at the edges
Coloured sealant across Hirst
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Quoting for work in Hirst
A fixed quote reflects the actual work. It takes account of:
- Travel to remote or island sites
- The site’s rules and procedures
- Whether old sealant has to be cut out first
- The product specified
A quote for colour-matched joints depends on how many there are, their condition and the access, plus any specification you’re working to. Call for a quote.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Whether the building will be occupied during the work
- Access details, including height
- Approximate linear metres or a joint schedule
- Your programme or deadline
For a fixed quote, speak to us on 01277 525 020 or email drawings and photos with the site address and an outline of the work. You can also send details through our quote form.
Coloured sealant in Hirst
Where finishes matter, a white or grey bead in the wrong place stands out. We install coloured and colour-matched sealant so joints sit quietly against cladding, stone, brick, frames and shop-fit finishes, for clients in Hirst. Performance decides the product; the colour is chosen from that product’s range. If you are dealing with marked sealant in hotel bathrooms and colour changes after a rebrand or refit, we can put it right. Looking for mastic applicators who cover Hirst? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
In smaller Scottish places like Hirst, commercial buildings are often hotels, pubs, shops, schools, surgeries and farm or estate buildings put to new use. Each has kitchens, washrooms and frames that depend on sound joints.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Hirst (ML7)
- Wider area
- North Lanarkshire
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Commercial clients in Hirst
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, which keeps the paperwork simple.
Our process
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes a few hours or a phased programme, depending on joint lengths and how many colours are involved, and we clear our waste as we work. For a building near Hirst, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Before we start on site
- Share your working hours and any access restrictions
- Warn occupants and staff about the work
- Share the asbestos register for older buildings
Quotes
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Advice
Frontages, fit-outs and joints in Hirst
Hirst is in the east of Scotland, which is drier than the west. Cold snaps still affect when external joints can be sealed. The 3 miles around Hirst take in at least three named trading estates, business parks or retail parks. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal.
Offices and shops close to stations such as Shotts station (2.3 miles south of Hirst) tend to be busy all day, so sealant work is planned around opening hours. Sites a few miles apart, such as Harthill Industrial Estate and Glenburn Industrial Estate, can share one programme and one point of contact. Industrial estates such as Harthill Industrial Estate, 1.9 miles to the east of Hirst, have offices, trade counters and welfare areas whose sealant ages like any other building’s.
Hirst is about 6 miles east of Airdrie, in North Lanarkshire. Anywhere in ML7, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Hirst is one of 100 places we cover in North Lanarkshire for colour-matched joints. For work in that direction, see our Glasgow page, about 18 miles away.
Anyone looking for coloured sealant in ML7 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are South Hirst Road and Hirst Road, and sites on any of them can send details for a fixed quote. Close to Hirst, our area also takes in Eastfield (2 miles east), Shotts (2 miles south), Salsburgh (2 miles west), Harthill (3 miles east) and Torbothie (3 miles south-east). A short drive away, we cover Motherwell (8 miles south-west), Cumbernauld (10 miles north-west), Coatbridge (8 miles west), Airdrie (6 miles west), Wishaw (7 miles south-west) and Bellshill (9 miles west).
What’s near Hirst
The closest station to Hirst is Shotts station, about 2.3 miles south of the centre. A little further out are Shotts Heritage Centre (2.3 miles south) and Murdostoun Castle (4.6 miles south-west). Not far away are Black Loch.
Why deal with it now?
It’s far cheaper to approve a sample than to strip and redo a full run. A short trial bead costs very little compared with replacing joints in the wrong colour. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Hirst before they leak.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- Clear, fixed quotes
- RAL and finish matching where the product range allows
- A Constructionline member, so easy to vet
- Commercial sealant work since 2005
Take a look at what affects the cost or our accreditations and insurance.
Also in Hirst
When something else is needed
Some faults sit outside our scope, and we say so rather than covering them up:
- A guaranteed perfect match to every finish
- Cleaning or repairing the surrounding finishes
- Finishes that change colour from one area to another
If you’re not sure, just phone 01277 525 020 or email a schedule or drawings and we will give you a straight answer before you book.
Where we work in Hirst
- Natural stone and brick
- Office fit-out finishes
- Hotel bathrooms and public areas
- Cladding panels
- Powder-coated and anodised frames
- Shop-fit joinery and counters
How the job changes by surface
Powder-coated and anodised frames
Window, door and shopfront frames in RAL colours often need a sealant to suit. The frame colour is checked against what the product is made in, and you confirm the choice.
Natural stone
Sandstone, limestone and granite each have distinct tones. We choose from the product’s range and agree the colour with you before the full run.
Your questions answered
Is Hirst too small for you to travel to?
No. Places such as Hirst are covered as much as the big towns. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Can you match sealant colours for premises in Hirst?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. The quote lists the colours the product is made in.
When can you be on site?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Can weather delay the job?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
How do I request a quote?
You can use the quote form on this site; alternatively, speak to us on 01277 525 020 or send details through our quote form. Include photos or drawings if you have them.
Which sealant will you use?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How long does a typical visit take?
It depends on the scope, though a typical visit typically takes a few hours or a phased programme, depending on joint lengths and how many colours are involved. For bigger or phased jobs, we’ll set out a timescale with the quote.