Shotts coloured sealant
Coloured and colour-matched sealant for visible joints throughout Shotts and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Sealant that no longer suits recoated frames
- Dirty, discoloured joints in public areas
- Untidy coloured beads with ragged edges
Coloured sealant for businesses in Shotts
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Standardise colours across a portfolio
- Brief cleaners about newly sealed joints
- Reseal whole runs rather than patching single joints
- Put the colour reference on the finishes schedule
Use gentle cleaning methods on coloured sealant. Harsh chemicals and scouring can change how the colour looks.
Use one product and colour reference across a building or brand. It keeps repairs and new sites consistent for whoever reseals next.
How we handle coloured sealant in Shotts
Window, door and shopfront frames in RAL finishes often need a sealant to suit. The frame colour is checked against the sealant’s standard range, and the nearest option is agreed with you. Where nothing in the range is close enough, a paintable hybrid or PU sealant may be an alternative, if the joint and specification allow. We work on office fit-out finishes, shop-fit joinery and counters and natural stone and brick, and the failures we are asked to look at most are untidy coloured beads with ragged edges and colour changes after a rebrand or refit. Looking for mastic applicators who cover Shotts? We’ve been sealing commercial buildings since 2005.
For a job around Shotts, the Scottish weather is part of the planning: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Internal joints can be done whatever the day brings.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Where
- Shotts (ML7)
- Region
- North Lanarkshire
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: Shotts
Is Glenburn Industrial Estate, near Shotts, within your area?
Yes. Our area takes in Shotts and its surroundings, with estates and business parks such as Glenburn Industrial Estate included. To start, just ring 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Is Shotts too far out for you?
Not at all. Shotts is within our area. We cover the whole of Scotland. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Does coloured sealant change colour outdoors?
It can, to a degree. Exposure, product and colour all play a part, so no colour stays exactly the same for ever.
Do you work on hotel and retail fit-outs?
Yes. We work with shop fitters, hotel groups and office fit-out contractors. Our area takes in Greater London, the South East and Scotland, so one colour reference can carry across every site.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
How do I request a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or send details through our quote form. Photos, drawings or a joint schedule help us quote quickly.
Can we specify the colour by RAL number?
Yes. Give us the RAL reference and we’ll check it against the product’s range. You will see the nearest options.
Shops, offices and hotels in and around Shotts
Shotts is on Scotland’s drier eastern side. Cold snaps still affect when external joints can be sealed. We plan external frontages and frames around that Shotts has two named business or industrial parks inside a 3-mile radius. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal, often in a colour the occupier specifies.
Offices and shops close to stations such as Shotts station (less than half a mile south-west of Shotts) tend to be busy all day, so sealant work is planned around opening hours. Refits at hotels like Station Hotel, less than half a mile south-west of Shotts, bring joints at vanity tops, bars and reception desks that guests see every day.
Shotts is about 6 miles north-east of Wishaw, in North Lanarkshire. Anywhere in ML7, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Shotts is one of 100 places we cover in North Lanarkshire. There’s a separate page for Glasgow, about 19 miles away.
Work on colour-matched joints is covered throughout ML7, whatever the building. We cover commercial and managed buildings on Station Road, Main Street and Regal Grove and the roads nearby. Close to Shotts, our area also takes in Burnbrae (1 mile south), Torbothie (1 mile east), Springhill (1 mile south-east), Eastfield (3 miles north-east) and Harthill (3 miles north-east). Bigger towns within reach include Motherwell (7 miles west), Cumbernauld (12 miles north-west), Coatbridge (9 miles west), Airdrie (8 miles north-west), Wishaw (6 miles south-west) and Bellshill (9 miles west).
Local landmarks in Shotts
There’s a railway station in Shotts itself: Shotts station. Nearby you’ll also find Murdostoun Castle (3.5 miles south-west) and Shotts Heritage Centre (less than half a mile east). Not far away are Allanton House lake.
Different surfaces, different methods
Powder-coated and anodised frames
Frames finished to a RAL reference are a frequent colour-matching job. We compare the reference with the specified product’s colour range, and the nearest option is agreed.
Shop-fit and joinery finishes
Shop fits bring laminate, timber, metal and stone together, each with its own colour. We choose sealant colours that suit each junction.
Also in Shotts
Signs you need coloured sealant in Shotts
Most enquiries start with a joint that looks wrong: white silicone against dark cladding, grey against timber or a yellowed bead on stone. A better-matched colour fixes the appearance without changing the joint’s job.
What tends to prompt an enquiry:
- Colour changes after a rebrand or refit
- Smeared sealant on stone or joinery
- Failed coloured sealant that has split or peeled
- A bead that fights the cladding or frame colour
If you run a unit on an estate such as Glenburn Industrial Estate, less than half a mile to the north-east of Shotts, the trade counter, offices and staff facilities have joints to look after as well as the warehouse.
What to look for in a quote
- What site paperwork they can supply
- Proof of insurance
- Their plan for phasing and protecting the area
- What the guarantee covers, and for how long
What sets the cost
We price every job individually. The things that drive the figure:
- Quantities, in metres or numbers
- How accessible the joints are
- Removal of failed or old sealant
- The site’s rules and procedures
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Before you send an enquiry
However big the job, these details speed things up:
- Asbestos survey details if the building is older
- How the joints are reached, and at what height
- Whether the building will be occupied during the work
- Where the site is, with the postcode
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, ring 01277 525 020 or send details through our quote form.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Jobs near Shotts are often grouped with others in the same area. Let us know if your dates have any give.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- Tell us your site hours and access windows and we will plan around them.
- We prepare each joint, prime where needed and fit backing.
- The agreed colour is installed and tooled neatly.
Preparing the site
- Tell staff and tenants when we’ll be in
- Make sure the joints can be reached
- Point out any areas we must not close
Quotes
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, speak to us on 01277 525 020 or send details through our quote form.
Advice
When something else is needed
Part of a good diagnosis is knowing where sealant stops. We will tell you if the real problem is one of these:
- Paint over sealant on joints that move too much
- Preventing all fading from sunlight and weathering
- Materials with mixed tones that defy a single match
If you are not sure, just speak to us on 01277 525 020 or email us and we’ll give you a straight answer.
Joints and surfaces we work on
- Cladding panels
- Office fit-out finishes
- Natural stone and brick
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
- Powder-coated and anodised frames