Colgate coloured sealant
Coloured and colour-matched sealant for visible joints across Colgate, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Old sealant that has yellowed, darkened or faded
- Smeared sealant on stone or joinery
- A run of joints in mismatched shades
Need coloured sealant in Colgate?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant in Colgate, done properly
We can agree a short trial length before the full run. Cured sealant may look a shade different from the wet bead, and lighting changes it again. Tell us who needs to approve the colour and we’ll plan for it. Most enquiries involve a run of joints in mismatched shades and discoloured joints on a visible elevation, on natural stone and brick, shop-fit joinery and counters and cladding panels. Looking for mastic applicators who cover Colgate? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Commercial sealant work around smaller places like Colgate tends to mean pubs and restaurants, halls, farm shops and offices in converted farm buildings. Kitchens, toilets and window frames in all of them need resealing sooner or later.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Colgate (RH13, RH12)
- Wider area
- West Sussex
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Quoting for work in Colgate
What shapes the price:
- Location, for remote and island sites
- How much existing material needs removing
- The product specified
- Joint width, depth and condition
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- Where the site is, with the postcode
- Asbestos survey details if the building is older
- Approximate linear metres or a joint schedule
- Photos of the joints, close up and from further back
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, give us a call on 01277 525 020 or send photos by email.
Our process
Working in a building that stays open takes some planning. We sign and contain the area we are in, with routes through the building left open and work section by section so the rest of the building stays in use. Rural sites near Colgate may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- The sealant type is chosen for the joint first, then the colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- A short trial length can be approved before the full run on visible work.
- We remove the existing bead, clean the faces and set the depth.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
Before we start on site
- Point out any areas we must not close
- Send asbestos survey details if the building is pre-2000
- Arrange parking or a loading space
Ask for a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, speak to us on 01277 525 020 or email the details over.
Advice
What we can’t put right
Being straight saves everyone time. Fresh joints won’t solve:
- A colour that never alters with age
- Paintable products in joints they aren’t suited to
- Cleaning or repairing the surrounding finishes
If in doubt, call 01277 525 020 or email us and we’ll say what we think.
What we seal
- Powder-coated and anodised frames
- Office fit-out finishes
- Natural stone and brick
- Shop-fit joinery and counters
- Cladding panels
- Hotel bathrooms and public areas
Questions about Colgate
Is Holmbush Potteries Industrial Estate, near Colgate, within your area?
Yes. Our area takes in Colgate and its surroundings, with estates and business parks such as Holmbush Potteries Industrial Estate included. Send details of the unit and the work through our quote form for a quick quote.
Can the sealant on our Colgate premises match the finishes?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. The quote lists the colours the product is made in.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Can staff carry on working while you are here?
In most cases, yes. We phase the work so most of the building stays in use.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Can you work to our specification?
Yes. Send it with your enquiry, and we’ll price the work to it.
What the job involves on each surface
Powder-coated and anodised frames
Anodised and metallic frames rarely have an identical sealant colour. We will suggest the nearest standard colours for approval.
Shop-fit and joinery finishes
In shops, joints are at eye level and inspected by clients. Clean masking and neat tooling matter as much as colour.
Sealant on show in Colgate’s commercial buildings
At about 30 miles from central London, Colgate is within reach of the capital. This part of the South East is dense with business parks and out-of-town offices. Firms with branches across the South East can use one contractor for every site. Colgate is in the South East, one of the UK’s drier regions. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it.
If you run a unit on an estate such as Holmbush Potteries Industrial Estate, 1 mile north of Colgate, the trade counter, offices and staff facilities have joints to look after as well as the warehouse. Occupiers with premises at both Holmbush Potteries Industrial Estate and New House Business Centre could have the sealant at each handled under one quote. Premises within reach of Faygate station (to the north-west of Colgate) often have busy frontages where joints are seen by everyone passing.
Colgate is about 3 miles south-west of Crawley, in West Sussex. Looking for coloured sealant in Colgate? We can help, as we do across West Sussex. Colgate is one of 373 places in West Sussex on our list. For work in that direction, see our Brighton page (18 miles or so).
We cover the RH13 and RH12 postcode districts for colour-matched joints. For a building on Forest Road, Vicarage Close and Blackhouse Road or nearby, we can quote for colour-matched joints. Close to Colgate, our area also takes in Kilnwood Vale (1 mile north), Faygate (1 mile north-west), Broadfield (2 miles north-east), Roffey (2 miles west) and Handcross (3 miles south-east). Bigger towns within reach include Crawley (3 miles north-east), Horsham (4 miles west), Haywards Heath (9 miles south-east), Burgess Hill (10 miles south-east), East Grinstead (11 miles east) and Storrington (14 miles south-west).
Local landmarks in Colgate
We work on buildings around The Dragon pub, Target Hill Park and Cottesmore School and the streets around them. The closest station to Colgate is Faygate station, roughly 1.3 miles north-west. Well-known places in the area include Crawley Museum (3.4 miles north-east) and County Mall (3.4 miles north-east). For a walk, there’s Tilgate Lake and Warnham LNR.
Keeping the joints sound
After handover, these steps help:
- Brief cleaners about newly sealed joints
- Note which sealant colour was used where
- Keep harsh solvents away from visible joints
- Use one colour standard across multi-site work
Clean coloured joints with mild, non-abrasive products. Strong solvents and abrasive pads can dull or mark the surface over time.
Standardise the sealant colour on multi-site work. It keeps repairs and new sites consistent for whoever reseals next.
General trades versus a specialist
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.