Coloured and colour-matched sealant in Burray Village, Orkney Islands
Coloured sealant for Burray Village, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Fit-outs with a sealant colour in the specification
- Marked sealant in hotel bathrooms
- Old colour-matched joints lifting at the edges
Coloured sealant across Burray Village
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
FAQs: Burray Village
Does the sea air around Burray Village change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Do you offer colour-matched sealant for buildings in Burray Village?
Yes, we can normally get close to most finishes from the product’s colour range. The quote lists the colours the product is made in.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Will you come and look before quoting?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Which sealant will you use?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What do you charge?
Each job is quoted on its own details. For yours, speak to us on 01277 525 020 or send details through our quote form with a description of the work.
Coloured sealant in Burray Village
Natural materials vary across a single elevation: sandstone, granite, brick and stained timber rarely have one flat colour. The aim is a sealant colour that sits comfortably against the whole surface, agreed on site where needed. We work on cladding panels, powder-coated and anodised frames and natural stone and brick, and the failures we are asked to look at most are dirty, discoloured joints in public areas and previous reseals that don’t match the original. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Burray Village is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For work in and around Burray Village, we’d rather do everything on one trip, so it helps to have photographs and a full list first. If neighbouring businesses have work too, the visits can be grouped.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Burray Village (KW17)
- Region
- Orkney Islands
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Travel to smaller Scottish places like Burray Village is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- We start with photos, drawings or a visit to see the finishes.
- Colour options from the specified product’s range are shared with you.
- Tell us your site hours and access windows and we will plan around them.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
What we need from you
- Let us know about inductions and permits
- Send your site hours and access windows
- For older buildings, check the asbestos register before work
Get a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or ring 01277 525 020 or send photos by email to discuss it first.
Advice
Leave it or put it right?
Resealing a full run gives a consistent colour. Piecemeal repairs over several years tend to drift in colour, so a planned reseal often looks better value. Around smaller places like Burray Village, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why choose Mastic Doctor in Burray Village
- Colour agreed before work starts
- Old sealant cut out, never sealed over
- Products installed to the manufacturer’s instructions
- Constructionline member for supplier checks
Read how commercial sealant jobs are priced and how we’re accredited.
Cost factors for colour-matched joints
The price varies from site to site. It mainly depends on:
- Site requirements such as inductions and permits
- Any access equipment needed
- Whether the work must be split into stages
- Joint width, depth and condition
We don’t publish prices, since every building and every scope is different. Call for a quote and we’ll price your job on its own details.
Sending details for a quote
A few photos plus some basic facts will normally do. It helps to include:
- Whether an asbestos survey exists
- Whether the building will be occupied during the work
- The postcode of the building
- Access details, including height
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, call the office on 01277 525 020 or email drawings and photos.
Honest limits
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Paint over sealant on joints that move too much
- Restoring stained stone or masonry next to old sealant
- Materials with mixed tones that defy a single match
If you’re not sure, just speak to us on 01277 525 020 or use the quote form and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Shop-fit joinery and counters
- Cladding panels
- Natural stone and brick
- Office fit-out finishes
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
What Burray Village’s businesses ask us to seal
The sea is no more than about 1 mile from Burray Village. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. Sea-facing elevations are normally where failed joints show first. Burray Village is in the east of Scotland, which is drier than the west. Cold snaps still affect when external joints can be sealed. Outside work is booked with that in mind
For any commercial premises in Burray Village, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Burray Village is about 9 miles south of Kirkwall, in the Orkney Islands. We cover commercial sites throughout Burray Village. 51 places across the Orkney Islands fall within our area, including Burray Village.
We take on colour-matched joints across the KW17 postcode area, whatever the building. We cover commercial and managed buildings on Lairds Road, Upper Waston Road and Sunfield and the roads nearby. Just outside Burray Village, we also work in Grimness (1 mile south), St Margaret's Hope (2 miles south-west), St Mary's (4 miles north), Widewall (4 miles south-west) and Upper Sanday (6 miles north-east). As one of the bigger centres in the Orkney Islands, Burray Village has a broad mix of commercial, public and industrial buildings. Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you speak to us on 01277 525 020 or use the quote form.
Landmarks near Burray Village
A little further out are W Hourston Blacksmiths Museum (2.1 miles south-west). For a walk, there’s Echna Loch and Ward Hill.
Towns and villages near Burray Village
Also in Burray Village
What we are called out for in Burray Village
On some projects the colour was never agreed. It seals fine but catches the eye.
Most enquiries start with something like this:
- Shop fits that need consistent sealant colours across sites
- Weathered sealant that no longer matches
- Poorly tooled joints on visible finishes
- Coloured joints that have cracked with movement
A hotel such as The Sands Hotel (less than half a mile south-east of Burray Village) shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Comparing quotes
- Can the work be phased to keep areas open?
- Their public liability cover
- Health and safety accreditation such as CHAS
- How long is the guarantee, and what does it include?