Coloured and colour-matched sealant in St Mary's, Orkney Islands
Work needed on a colour-matched joint in St Mary's? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Previous reseals that don’t match the original
- A bead that fights the cladding or frame colour
- Fit-outs with a sealant colour in the specification
Coloured sealant near St Mary's
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant for commercial buildings in St Mary's
Colour is often written into the specification, by RAL reference or by matching a sample. Standard sealant ranges cover many colours, and we’ll confirm the colours available for the specified product at quote stage. We don’t promise an exact custom match, but we will show you the closest options. We work on shop-fit joinery and counters, office fit-out finishes and hotel bathrooms and public areas, and the failures we are asked to look at most are standard-colour sealant spoiling a high-end finish and previous reseals that don’t match the original. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in St Mary's, preparation and product choice get the time they need.
Travel to smaller places such as St Mary's is planned so the whole job is finished in one visit where possible: send photographs and a complete list so the right products and colours come on the day. Several jobs nearby can also be put together.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- St Mary's (KW17)
- Wider area
- Orkney Islands
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Our process
In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. Travel to smaller Scottish places like St Mary's is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- We start with photos, drawings or a visit to see the finishes.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- The agreed colour is installed and tooled neatly.
Getting the site ready
- Tell us which areas need to stay in use
- Move anything stored against the joints
- For older buildings, check the asbestos register before work
Request a quote
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or use the quote form.
Related advice
Also near St Mary's
Other services in St Mary's
When to bring in a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
How the job changes by surface
Paintable sealants
Overpainting is most common on internal joints with little movement. If the joint needs a product that can’t be painted, we say so.
Natural stone
Stone has variation, so the aim is a colour that sits naturally against it. A stone-safe neutral-cure product is used.
After the work
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Don’t let trades patch coloured joints with a random sealant
- Keep the area clear while the sealant cures
- Settle the colour with the designer at the start
- Reseal whole runs rather than patching single joints
Colours can soften with light and weathering. Some fading is part of normal ageing outdoors, and resealing restores the look when the time comes.
Ask for a trial bead on high-profile areas. Seeing the cured colour in place avoids surprises.
When something else is needed
Not every problem is a sealant problem, and we’re upfront when that’s the case. It won’t fix:
- Colour variation across natural stone or brick that no single shade can match
- Repairing damaged frames or cladding
- Paint over sealant on joints that move too much
If in doubt, speak to us on 01277 525 020 or email us and we’ll say what we think.
Joints and surfaces we work on
- Powder-coated and anodised frames
- Cladding panels
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
- Office fit-out finishes
- Natural stone and brick
Coloured sealant in St Mary's: the local picture
The sea is no more than about 1 mile from St Mary's. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. A matched colour is only half the brief on an exposed frontage. Island jobs, St Mary's among them, are planned around the ferry and the forecast. Colour references and photographs up front let us bring the right sealants first time.
For any commercial premises in St Mary's, a lasting joint depends on full removal of the old sealant and clean, dry faces. For premises around St Mary's where the joint is seen, colour options for the product are confirmed with the quote.
St Mary's is about 6 miles south of Kirkwall, in the Orkney Islands. Across the KW17 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. St Mary's is one of 51 places we cover in the Orkney Islands for colour-matched joints.
We take on colour-matched joints across the KW17 postcode area. Streets here include Station Square, St Mary's Road and Storehouse Place. Close to St Mary's, our area also takes in Upper Sanday (3 miles east), Burray Village (4 miles south), Toab (4 miles north-east), Grimness (5 miles south) and St Margaret's Hope (5 miles south). St Mary's ranks among the main centres of the Orkney Islands, with offices, shops, schools and other public and commercial buildings, and we cover them all. Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
What’s near St Mary's
Other landmarks nearby include Balfour Hospital (5.8 miles north) and Graemeshall Museum (0.5 miles north-east). The countryside around St Mary's includes Gaitnip Hill and Loch of Ayre.
Quoting for work in St Mary's
Before we quote, we look at:
- Phasing around occupants
- The site’s rules and procedures
- How much existing material needs removing
- How accessible the joints are
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Before you send an enquiry
Diagnosis starts before we arrive. Tell us:
- When you need the work done
- The postcode of the building
- How the joints are reached, and at what height
- Photos of the joints, close up and from further back
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Common questions from St Mary's clients
Can you take on a job in St Mary's, on the island?
Yes. Islands are part of our area, St Mary's included. Island work is planned around ferry crossings and the weather, so photos and a full list before we travel are essential.
Can you match sealant colours for premises in St Mary's?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photographs and we’ll confirm what’s available for the product.
Do you take on small jobs?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
What do you charge?
Every job gets its own fixed quote. To get one, call the office on 01277 525 020 or send photos by email.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
How long does a typical visit take?
The duration is planned around your programme and the access we are given. You’ll have an expected duration with the quote.