Commercial washroom and wet-area sealing in Grimeston, Orkney Islands
Work needed on a washroom in Grimeston? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Discoloured joints around urinals and WC pans
- Open joints along basins and vanity units
- Open joints at the base of cubicle panels
Washroom sealing in Grimeston
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle washroom sealing in Grimeston
Facilities managers, contractors and building owners have used us for washroom sealing for over 20 years. We are CHAS accredited and a Constructionline member, with CSCS-carded applicators. We are fully insured. Our workmanship is guaranteed for 12 months. If you have users noticing mouldy joints and open joints along basins and vanity units, we can put it right, on accessible toilets and changing rooms, vanity units and basins and IPS panels and cubicles alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Grimeston, that means joint design, primers and backing rod as standard.
For washroom work around Grimeston, we plan so every room on the list is done in one trip where possible. Photos of each washroom and a count of rooms help us quote and plan.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Grimeston (KW17)
- Region
- Orkney Islands
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Maintenance after handover
Once the work is signed off, a little attention goes a long way:
- Squeegee showers and trays after busy periods
- Leave signs up until the cure time is over
- Clean sealant with gentle products and a soft cloth
- Don’t leave an open joint at a basin or tray
Mild cleaning products and non-abrasive cloths look after sanitary silicone best. Aggressive descalers, solvents and scouring pads shorten its life and give mould a start.
A split joint at a shower tray can leak for a long time before anyone sees it. By then, other trades may be needed as well so failed joints are worth acting on quickly.
Why deal with it now?
Sealing on top of old silicone saves nothing. Silicone won’t grip silicone, so it lifts and holds moisture underneath. Full removal and proper cleaning is what makes the new joint last. Around smaller places like Grimeston, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a fixed quote when you’re ready.
What you get with us
- A Constructionline member, so easy to vet
- Work to your specification and the manufacturer’s guidance
- Coloured sealants to suit the setting, where available
- 12 months’ guarantee on every job
Take a look at our cost guide or our accreditations.
Keeping Grimeston washrooms open while we work
The sea is no more than about 1 mile from Grimeston, and seaside hospitality normally has a peak season that works washrooms hard. Showers and en suites in constant use are where silicone moulds and splits first, so we plan the work for quieter weeks where possible. Being in the east of Scotland, Grimeston gets less rain than the west coast. Inside, ventilation and use decide how fast washroom sealant moulds, whatever the weather.
Washrooms near Grimeston get the old silicone stripped out and a fresh anti-mould bead on dry joints. Around Grimeston, we keep some washrooms open while others are resealed.
Grimeston is about 9 miles west of Kirkwall, in the Orkney Islands. Businesses, contractors and managing agents in Grimeston can call on us for washrooms and wet areas, as part of our coverage of the Orkney Islands. We work across 51 places in the Orkney Islands, from busy centres to rural villages.
We take on washrooms and wet areas across the KW17 postcode area. Just outside Grimeston, we also work in Bimbister (1 mile north-east), Harray (2 miles north), Stenness (2 miles south), Wasbister (2 miles west) and Russland (2 miles north). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Landmarks near Grimeston
Nearby you’ll also find Corrigall Farm Museum (3 miles north). Open spaces near Grimeston include Hill of Heddle and Loch of Harray.
Other services in Grimeston
Should maintenance staff do it?
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Surface by surface
Urinals and WC pans
We reseal around urinals and pans with a sanitary grade after the old bead and residue are removed.
Wet-room floors and floor-to-wall joints
Changing rooms and accessible showers often have wet floors so the edges are checked carefully.
Quoting for work in Grimeston
To price the job, we consider:
- Travel to remote or island sites
- Whether old sealant has to be cut out first
- Backing rod, priming and other preparation
- Site requirements such as inductions and permits
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Details that help us quote
However big the job, these details speed things up:
- The type of building and who uses it
- Your programme or deadline
- Anything awkward about access or site hours
- Drawings or a marked-up plan, if available
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or use the quote form with what you know.
Our process
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Jobs near Grimeston are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- We inspect each washroom and record the joints to be resealed.
- The fixed quote sets out the rooms, the products and the phasing.
- The whole of the old bead is removed.
- Each joint is cleaned and left dry.
- New anti-mould sealant goes in and is tooled neat.
- Rooms reopen after the cure time.
Before we start on site
- Tell us your opening times and when work is allowed
- Make sure the joints can be reached
- Send any specification or drawings in advance
Quotes
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or email drawings and photos to discuss it first.
Advice
Questions we’re asked in Grimeston
Do you work on the island where Grimeston is?
Yes. Islands are part of our area, Grimeston included. We group island work where we can and plan around the crossings.
Must every washroom in our Grimeston building shut while you work?
Normally only some of them, for a short time. We work in phases so other facilities stay open. Sanitary silicone needs time to cure before the area is used, and we’ll tell you how long for the product used.
Do you take on small jobs?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Does the weather affect the work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Is there a guarantee on the work?
Every job carries our 12-month guarantee. It applies to our workmanship, not to plumbing leaks or damp from poor ventilation.
Do you need to see the site first?
It depends on the job. Simple work can often be priced from photographs, and bigger or more complex jobs normally get a visit.
Who decides which product is used?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.