Construction and new-build mastic in Shottenden, Kent
Planning work on a mastic package in Shottenden? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- A long mastic snag list close to completion
- New external sealant already peeling away
- Frame perimeters left unsealed or poorly sealed
Construction mastic near Shottenden
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our construction mastic in Shottenden
Perimeter sealing outside needs a dry joint and the right temperature. Cold or damp mornings, frost and condensation on frames can all hold external sealing up so it helps to sequence elevations with some flexibility. Internal areas can normally carry on while the outside waits. We work on window and door perimeters, brick and block movement joints and sanitary and kitchen joints, and the failures we are asked to look at most are different trades sealing to different standards and external joints sealed in damp or cold conditions that are now failing. Whoever orders the work in Shottenden, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Conversions of older rural buildings near smaller places such as Shottenden bring stone, flint, brick and timber up against new glazing. Those joints need a sealant that suits an uneven, sometimes porous surface, and often a colour chosen for the building.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Place
- Shottenden (CT4)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
When something else is needed
We check first that sealant really is the fix. It isn’t the answer for:
- Specifying the product where the designer hasn’t
- Oversized gaps that need packing or adjustment by others
- Glazing units that are cracked or misted
If you’re not sure, just call 01277 525 020 or email drawings and photos and we’ll give you a straight answer.
Surfaces we seal
- Sanitary and kitchen joints
- Cladding and panel joints
- Window and door perimeters
- Brick and block movement joints
- Floor and skirting junctions
- Internal decorators’ caulk
Towns and villages near Shottenden
What else we do in Shottenden
Diagnose, treat, sign off
In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. Jobs in and around smaller places like Shottenden are usually planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We price from the drawings, specification and programme you send.
- A fixed quote sets out the scope, the products and the sequence.
- Any site paperwork you need (RAMS, insurance certificate, CSCS details) is confirmed with the quote.
- We seal each plot or floor as it’s released to us.
- Every joint is prepared, set to depth and sealed with the specified product.
- Before handover, snags are dealt with and the package is signed off under our 12-month guarantee.
Getting the site ready
- Send any specification or drawings in advance
- Share your working hours and any access restrictions
- Clear stock, furniture or equipment away from the joints
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to phone 01277 525 020 or email drawings and photos with what you know.
Related advice
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Ask installers to correct oversized gaps first
- Share drawings and the specification as soon as possible
- Record the products used in the O&M file
- Put any product change through the designer first
A new structure shifts as it loses construction moisture. Flexible sealants in the right joints handle normal movement, but caulk in a joint that moves more than expected may crack. If that happens, let us know.
Snag items left to the last week put handover at risk. Clearing snags area by area spreads the work out and keeps handover on track.
Do you need construction mastic in Shottenden?
Frames installed with uneven gaps make perimeter sealing harder. Sealant has a range of joint widths it can cope with and gaps beyond it need packing or adjusting by the frame installer. Better to raise it at the start than seal a joint that’s bound to fail.
What tends to prompt an enquiry:
- Mastic snags holding up handover
- Window and door perimeters that won’t pass inspection
- Perimeter gaps outside the sealant’s range
- Sealant knocked or painted over by other trades
For contractors building in or near Shottenden, we seal to the drawings, the specification and the programme.
What your quote should include
- Which product they’ll use, and why it suits the joint
- What the guarantee covers, and for how long
- Will CSCS-carded applicators be on site?
- Do they follow the manufacturer’s priming guidance?
Mastic packages on Shottenden sites
Shottenden lies roughly 47 miles out from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, so mastic packages have to keep pace with busy programmes. Shottenden is in the South East, one of the UK’s drier regions. Even so, frost and condensation on steel and glass are common on winter mornings, which is why external dates are agreed with the site manager.
With historic properties like Belmont House and Gardens (to the north-west of Shottenden) in the area, refurbishment work often meets old masonry that needs compatible sealants.
Shottenden is about 5 miles south of Faversham, in Kent. We cover commercial sites throughout Shottenden, whether it’s a single job or part of a planned programme. Across Kent, 931 places are covered, including Shottenden. London is covered too, some 47 miles away.
We take on mastic packages across the CT4 postcode area. Among the streets we cover are Shottenden Road, Goldups Lane and Beaney's Lane. We also cover Perrywood (1 mile north), Selling (1 mile north), Hogben's Hill (2 miles north), Molash (2 miles south-west) and Mountain Street (2 miles south-east). Bigger towns within reach include Ashford (8 miles south), Canterbury (7 miles east), Sittingbourne (10 miles north-west), Whitstable (8 miles north-east), Faversham (5 miles north) and Herne Bay (12 miles north-east).
Near you in Shottenden
For rail, the closest station is Selling station, roughly 2 miles north of the centre. Nearby you will also find Tower keep castle at Chilham (1.6 miles east).
FAQs: Shottenden
What paperwork can you provide for a job in Shottenden?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We are CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
Can the mastic package for our job in Shottenden follow the site programme?
Yes, we work to the programme and the sequence the site sets. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Do you do internal caulk as well as external mastic?
External and internal frame perimeters, caulking where it’s specified, sanitary silicone, kitchen joints and snagging before handover. We price to the specification and drawings.
Do you take on mastic snagging only?
Yes, we can. Share the list and photographs, and a fixed quote follows.
Do your applicators hold CSCS cards?
Our applicators hold CSCS cards, and we are CHAS accredited and a Constructionline member. We’re also fully insured, with five million pounds of public liability cover.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Do you use the sealant named in the specification?
We follow the specified sealant and flag anything that doesn’t look right for the joint. Specifications often reference BS EN 15651 or BS 6213.
Leave it or put it right?
A cheaper sealant can look like an easy saving on a large package. A failed joint in the defects period costs far more than the product difference. Where an alternative is genuinely suitable, we’ll say so. Converted and older buildings near places like Shottenden tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
Why clients in Shottenden choose us
- Old sealant cut out, never sealed over
- A Constructionline member, so easy to vet
- Sealing commercial buildings since 2005
- 12-month guarantee on workmanship
See what affects the cost and our accreditations and insurance.
When to bring in a specialist
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.