The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Commercial washroom and wet-area sealing in Ashford, Kent

Work needed on a washroom in Ashford? We assess it, carry out the work and guarantee our workmanship for 12 months.

  • Stained sealant around pans and urinals
  • Gaps where vanity tops meet the wall
  • Mould spotting along silicone joints
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
CHAS & Constructionline
£5m PL insurance

Washroom sealing in Ashford

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

How we handle washroom sealing in Ashford

For clinics, hospitals and care homes, sealed joints matter for infection control as much as appearance. We work to your organisation’s estates and infection-control requirements and any site permits. Any records you need are confirmed with the quote. We work on vanity units and basins, IPS panels and cubicles and kitchens and tea points, and the usual reasons a site gets in touch are black mould inside silicone joints that cleaning can’t shift and panel joints letting water behind. Facilities teams, main contractors and managing agents in Ashford tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.

In a big town such as Ashford, public-facing washrooms in shopping centres and leisure buildings stay in use most of the day. We plan resealing in phases so facilities stay open.

Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.

The Mastic Doctor team standing beside their branded vans outside an office building
Location
Ashford (TN23, TN24, TN25, TN26)
Region
Kent
Cover
12 months on our workmanship
Quotes
Fixed quote, scope in writing
Call
01277 525 020
Page updated
3 November 2026

Washroom sealing around Ashford: how the place shapes the job

There are plenty of hotels within about 2 miles of Ashford. En suite bathrooms, staff changing rooms and kitchens all need their sanitary silicone renewed in time. We work a handful of rooms at a time, so the hotel keeps letting the rest. The 2 miles around Ashford include two care or nursing homes. In a care setting, a mouldy or lifting joint in a wet room is a hygiene issue as much as a cosmetic one. We plan the work with the manager so residents are disturbed as little as possible.

Staff changing rooms and patient toilets at places like The One Ashford Hospital (to the east of Ashford) need cleanable, sound silicone. At a college such as Ashford College (0.5 miles north-east of Ashford), washroom and kitchen sealant is best renewed in the holidays or in phases during term. At a retail site such as Gallagher Retail Park, under half a mile to the south-east of Ashford, public and staff toilets see heavy use, so mouldy or split sealant is best replaced in phases.

Ashford is in Kent. We send applicators to Ashford for washrooms and wet areas, handled exactly as we handle every other area. Ashford is one of 931 places in Kent on our list for washrooms and wet areas. London is covered too, some 48 miles away.

We cover the TN23, TN24, TN25 and TN26 postcode districts. We cover commercial and managed buildings on Market Lane, Church Road and Station Road. Ashford sits on or close to the A20 and A28, useful when we plan access and materials. Nearby places we also cover include Stanhope (1 mile south-west), Newtown (1 mile south-east), South Willesborough (1 mile south-east), Godinton (1 mile north-west) and Willesborough (1 mile east) for washrooms and wet areas. Bigger towns within reach include Canterbury (13 miles north-east), Sittingbourne (15 miles north), Folkestone (14 miles east), Faversham (12 miles north), Hythe (10 miles south-east) and Davington (12 miles north). Among the larger centres in Kent is Ashford, and its commercial and public buildings are all within our area.

What’s near Ashford

We work on buildings around The Locomotive pub, Ashford Green Corridors and Ashford School, among other places. Ashford has its own railway station: Ashford International station. Nearby you’ll also find William Harvey Hospital (2.1 miles east) and Ashford Designer Outlet (0.6 miles south-east). The countryside around Ashford includes Hatch Park.

Map of Ashford © OpenStreetMap contributors

How a job runs

Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Bigger buildings in Ashford are usually done in phases agreed with the site or facilities manager, so the building keeps working. Send drawings or photos and we’ll set out a phasing plan with the quote.

  1. First, the phasing is agreed so facilities stay open.
  2. Anything behind the joints that needs another trade is flagged.
  3. Failed sealant and residue are stripped out.
  4. We reseal with the grade suited to each area.
  5. We confirm reopening times for each washroom.

What we need from you

  • Confirm the product named in the specification
  • Share your working hours and any access restrictions
  • Share the asbestos register for older buildings

Quotes

A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.

Get a price

Advice

General trades versus a specialist

A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.

Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.

Looking after the joints

Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:

  • Report split joints at trays and basins early
  • Share your site rules when you send details
  • Keep extract fans working and vents clear
  • Clear standing water from shower floors where possible

Where possible, have shower floors and trays squeegeed after busy periods. Joints that sit wet for hours fail sooner.

Small numbers of failed joints are quick to phase in. Left until every washroom is affected, it becomes a bigger programme with more phasing to plan.

Cost factors for washrooms and wet areas

Your fixed quote is built from the real scope. It allows for:

  • Backing rod, priming and other preparation
  • Which sealant the job calls for
  • How much there is to seal
  • The site’s rules and procedures

A quote for washrooms and wet areas depends on quantities, condition and access. Call for a quote.

Before you send an enquiry

The more we know, the firmer the quote. When you get in touch, include:

  • Asbestos survey details if the building is older
  • The type of building and who uses it
  • Your programme or deadline
  • Where the site is, with the postcode

Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, call 01277 525 020 or email us.

How the job changes by surface

Kitchens and tea points

Worktop, sink and splashback joints in tea points take water and food. Sound joints keep those surfaces easy to clean.

Basins and vanity tops

Natural stone tops can be marked by acetoxy silicone, so the product is chosen to suit.

When something else is needed

Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be one of these:

  • Fittings that move too much to hold a bead
  • Mould caused by poor ventilation, which will return until the extract is fixed
  • Water from plumbing, not from a joint

If in doubt, give us a call on 01277 525 020 or send photos by email and we will say what we think before you book.

Where we work in Ashford

  • Showers, trays and wet room floors
  • Kitchens and tea points
  • Vanity units and basins
  • Accessible toilets and changing rooms
  • Urinals and WCs
  • IPS panels and cubicles

Questions we’re asked in Ashford

Do you work in occupied care homes around Ashford?

Yes. We agree rooms and times with the manager and work a few areas at a time. Noise and disruption are kept to a minimum.

Can you work around term dates at a campus such as Ashford College?

Yes. Tell us the term dates, vacation periods and access windows, and we will plan the work around them. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.

Can you handle several sites?

Yes. Several buildings can share a single quote, and you deal with one contact throughout across South East England, Greater London and Scotland.

Will you quote for a small job?

Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.

Can weather delay the job?

For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.

Do you need to remove the old sealant?

The failed bead is always removed. Fresh silicone can’t key to an old bead, so sealing over it soon peels.

Can you reseal washrooms in healthcare buildings?

We work in clinics, hospitals and care homes. Any records you need are confirmed with the quote.

Accreditations

Trusted. Accredited. Insured.