Washroom Sealing contractors in Scourie More
Sealing in commercial washrooms, showers, kitchens and wet areas throughout Scourie More and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Open joints along basins and vanity units
- Washrooms that look worn because of the sealant
- Sealant laid over old silicone and now peeling
Washroom sealing near Scourie More
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Washroom sealing for commercial buildings in Scourie More
Facilities managers, contractors and building owners have used us for washroom sealing for over 20 years. Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We are fully insured. Every resealed washroom carries our 12-month guarantee. We work on accessible toilets and changing rooms, vanity units and basins and IPS panels and cubicles, and the usual reasons a site gets in touch are open joints along basins and vanity units and kitchen worktop joints that can’t be kept clean. A single leaking joint is often how a building in Scourie More first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around smaller places such as Scourie More, washrooms and kitchens are found in hotels, pubs, schools, care homes and halls. Black sealant typically can’t be cleaned, so it is removed and replaced with anti-mould sanitary silicone.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- Scourie More (IV27)
- Wider area
- Highland
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What happens if it’s left?
Gaps and mould in joints give dirt and bacteria somewhere to sit, and in kitchens, clinics and schools that is a real concern. Sound, smooth joints are much easier to keep clean. Around smaller places like Scourie More, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Resealing early avoids that.
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site requirements come into it too.
What you get with us
- One number for every site we cover
- Colours chosen to suit frames, cladding or finishes where possible
- Over 20 years of commercial sealing
- Clear, fixed quotes
Take a look at our cost guide and how we’re accredited.
Also near Scourie More
Also in Scourie More
Common questions from Scourie More clients
Is Scourie More too far out for you?
No. Small places get the same service as large ones. Every Scottish council area is within our area. Where we can, we group nearby jobs to make the most of each trip.
Must every washroom in our Scourie More building shut while you work?
Typically only some of them, for a short time. We work in phases so other facilities stay open. Sanitary silicone needs time to cure before the area is used, and we will tell you how long for the product used.
How many days will you need on site?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Do you offer coloured sealant?
That depends on the product specified. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
What we’re called out for in Scourie More
Sometimes the sealant fails because something behind it is moving or wet: loose fixings, a dripping trap or damp in the wall. We check for that first and tell you if another trade is needed.
Typical triggers for a call:
- Failed joints along IPS and cubicle panels
- Sealant laid over old silicone and now peeling
- Users noticing mouldy joints
- Kitchen worktop joints that can’t be kept clean
At a hotel such as Scourie Hotel, 0.6 miles to the north-east of Scourie More, the quieter weeks are the time to reseal bathrooms.
Comparing quotes
- Their plan for phasing and protecting the area
- Whether their applicators hold CSCS cards
- Whether old or failed sealant will be cut out, not overlaid
- Are they CHAS accredited or on Constructionline?
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Jobs near Scourie More are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- Every room is surveyed and the failed joints listed.
- The fixed quote sets out the rooms, the products and the phasing.
- Old sealant is removed completely and the faces cleaned.
- Joints are degreased and dried.
- New anti-mould sealant goes in and is tooled neat.
- Each area is handed back when ready.
Getting the site ready
- Send any specification or drawings in advance
- Flag any permit to work we will need
- Explain the parking and delivery arrangements
Quotes
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, give us a call on 01277 525 020 or send details through our quote form.
Read more
Doing it in-house
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Wet areas in Scourie More’s workplaces
Scourie More sits close to the coast, within about 1 mile, and coastal places often have hotels, guest houses and holiday accommodation with busy seasons. Bathrooms turned round daily in the busy months need sound, cleanable joints, so resealing in the quieter months keeps rooms ready. Several hotels sit less than 2 miles from Scourie More. Behind every hotel door there’s a bathroom whose sealant will need renewing sooner or later. We work a handful of rooms at a time, so the hotel keeps letting the rest.
Washrooms near Scourie More get the old silicone stripped out and a fresh anti-mould bead on dry joints.
Scourie More is in Highland. Any commercial site in Scourie More is covered, for single jobs and planned programmes alike. Scourie More is one of 256 places in Highland on our list for washrooms and wet areas.
We take on washrooms and wet areas across the IV27 postcode area, for business premises of every kind. We also cover Scourie (1 mile north-east), An Druim Beag (7 miles south), Kinlochbervie (9 miles north-east), Stor (11 miles south-west) and Stoer (12 miles south-west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you ring 01277 525 020 or email us.
What’s near Scourie More
Green spaces nearby include Handa Island and Loch Bad nam Mult.
Quoting for work in Scourie More
To price the job, we consider:
- Any access equipment needed
- Specialist products, such as fire-rated or hygienic sealants
- How much existing material needs removing
- The site’s rules and procedures
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
What to include in your enquiry
Whether it’s one area or a whole building, the same details help:
- A wide shot and a close-up of the area
- Any specification or named product
- Your programme or deadline
- Access details, including height
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Keeping the joints sound
A few simple habits keep the new joints working:
- Squeegee showers and trays after busy periods
- Don’t leave an open joint at a basin or tray
- Avoid scourers and harsh descalers on silicone
- Keep extract fans working and vents clear
Ventilation is half the battle. Constant damp lets mould take hold even on anti-mould grades, so get faulty extract looked at.
A split joint at a shower tray can leak for a long time before anyone sees it. At that stage, boards or ceilings may need repair, so reseal when you first spot a split.