Facade and window perimeter sealing in Scourie More, Highland
Facade sealing in Scourie More, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Previous reseals run over old sealant
- Water coming in around window frames
- Failed sealant on precast panel joints
Need facade sealing in Scourie More?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Facade sealing in Scourie More
We seal window and door perimeters, cladding panel joints, external facade joints and perimeter joints where frames meet the structure on offices, blocks and industrial units. Where sealant is the specified fix, we also take on coping and flashing joints. We work on perimeter joints where frames meet the structure, window and door perimeters and cladding panel joints, and the failures we are asked to look at most are new sealant peeling off old mastic and old perimeter mastic that has dried out. Whether you call it commercial sealant work, mastic application or joint sealing, in Scourie More it comes down to the same thing: the right product in a properly prepared joint.
Construction around smaller Scottish places like Scourie More is often one-off schemes: a school, a health centre, a hotel extension or a few houses. The mastic still needs to suit exposed elevations and Scottish weather.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Place
- Scourie More (IV27)
- Wider area
- Highland
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
How the job changes by surface
Cladding panel joints
Joints between cladding panels open and close with temperature. We use a product rated for the movement and suited to the panel surface.
Render and coated surfaces
Where the joint will be painted over, a paintable hybrid or PU sealant may suit. We confirm the product with you before starting.
Sites and facades in and around Scourie More
Scourie More is within about 1 mile of the coast. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, so we check the specified product suits the exposure before the first bead. Building work in Scourie More comes under the Building (Scotland) Regulations 2004 and their technical handbooks, with warrants from the local authority verifier. We seal to the specification that sits behind the warrant.
On any site in or around Scourie More, the mastic follows the specification and the programme.
Scourie More is in Highland. Any commercial site in Scourie More is covered, whether it’s a single job or part of a planned programme. Our Highland coverage takes in 256 places, from busy centres to rural villages.
Postcode districts covered here: IV27 for facade joints. Nearby places we also cover include Scourie (1 mile north-east), An Druim Beag (7 miles south), Kinlochbervie (9 miles north-east), Stor (11 miles south-west) and Stoer (12 miles south-west). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Near you in Scourie More
Green spaces nearby include Handa Island and Loch Bad nam Mult.
How a job runs
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. Jobs near Scourie More are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- We start with photographs, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- Failed beads are removed in full.
- Primer is applied where the maker specifies it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- The finished joints are checked with you.
Preparing the site
- Let us know about inductions and permits
- Warn occupants and staff about the work
- Move anything stored against the joints
Ask for a quote
For a fixed quote, call the office on 01277 525 020 or email drawings and photos with the site address and an outline of the work. You can also send details through our quote form.
Related advice
Questions we’re asked in Scourie More
Is Scourie More off your patch?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Good photos up front let us bring everything on the first visit.
Can you work to our programme on a site in or near Scourie More?
Yes. Send the programme and drawings, and we’ll plan the mastic to suit the stages. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
How do you choose the sealant?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and we will price the work to it, flagging anything that needs clarifying.
Do you replace windows or glass?
No. A glazing contractor handles that. What we seal are the joints around frames and panels on commercial buildings.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
What will the job cost?
Each job is quoted on its own details. For yours, phone 01277 525 020 or email a schedule or drawings with a description of the work.
Signs you need facade sealing in Scourie More
Product choice matters: acetoxy-cure silicone may mark stone or corrode certain metals, and an interior product won’t last outdoors. Most external joints call for a neutral-cure, facade-grade sealant.
It’s worth sending us details if you spot any of the following:
- Sealant pulling away from frames or panels
- Old perimeter mastic that has dried out
- Failed seals around shopfront and entrance frames
- Damp patches beside frames after rain
For a contractor at a hotel such as Scourie Hotel (0.6 miles north-east of Scourie More), the mastic often has to be finished before a reopening date.
Before you book anyone
- How joint depth will be controlled
- The named product and why it was chosen
- Their pre-qualification and accreditations
- Whether old or failed sealant will be cut out, not overlaid
Owners, agents and contractors
We work for building owners and managing agents on everything from one building to a spread of sites around Scourie More. One quote can cover more than one site, which keeps the paperwork simple.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Nearby places to Scourie More
Also in Scourie More
After the work
Once the work is signed off, these steps help:
- Keep the sealant details on the building file
- Report water ingress at frames as soon as it shows
- Brief window cleaners about newly sealed joints
- Confirm the survey covers external sealants in older buildings
Anything drilled through a facade joint breaks the seal. Ask the installer to reseal it properly using a matching sealant.
Get the joint design right when resealing: the right width, backing rod and a sealant with enough movement capability. A well-designed joint lasts longer than a like-for-like copy of a failed one.
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.