Commercial washroom and wet-area sealing in Dyce, Aberdeen
Planning work on a washroom in Dyce? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Failed joints along IPS and cubicle panels
- Users noticing mouldy joints
- Sealant lifting along a tray edge
Washroom sealing for Dyce sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Washroom sealing in Dyce
Closing all the facilities in a building isn’t an option. Work is phased by room or by section, so there are always facilities in use. Give us your site hours and access windows and the phasing is planned around them. If you are dealing with shower tray joints that have opened up and gaps where vanity tops meet the wall, we can put it right. A single leaking joint is often how a building in Dyce first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In Scotland’s cities, university, hospital and office estates have washrooms and wet areas in nearly every building. We reseal them in phases, agreed with the estates or facilities team.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Place
- Dyce (AB21, AB22)
- Wider area
- Aberdeen
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What sealant work can’t fix
Being straight saves everyone time. Fresh joints won’t solve:
- A dripping waste or valve behind a panel
- Panel boards already damaged by water
- Loose panels, vanity units or tiles, which need fixing first
Not sure which it is? You can phone 01277 525 020 or email the details over and we’ll tell you honestly.
What we seal
- Kitchens and tea points
- Urinals and WCs
- Accessible toilets and changing rooms
- Showers, trays and wet room floors
- Vanity units and basins
- IPS panels and cubicles
Nearby places to Dyce
More services for Dyce
Wet areas in Dyce’s workplaces
There are plenty of hotels within about 2 miles of Dyce. En suite bathrooms, staff changing rooms and kitchens all need their sanitary silicone renewed in time. The work can go floor by floor, agreed with housekeeping. Dyce is on Scotland’s drier eastern side. Inside, ventilation and use decide how fast washroom sealant moulds, whatever the weather.
Welfare facilities in units on estates such as Farburn Industrial Estate (to the south-east of Dyce) have showers, toilets and kitchens with sealant that works hard. For a campus such as University of Aberdeen - Foresterhill Campus, 3.9 miles to the south-east of Dyce, showers in residences and washrooms in teaching blocks can be programmed around term dates. Healthcare washrooms on sites such as Woodend Hospital (to the south of Dyce) are resealed area by area, under the site’s own infection-control rules.
Dyce is about 4 miles north-west of Aberdeen, in Aberdeen. We cover Dyce, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 40 places in Aberdeen, from busy centres to rural villages.
Business premises anywhere in AB21 and AB22 are within our area for washrooms and wet areas. Streets here include Glen Road, Argyll Road and Walton Road. You will find Dyce on or near the A947, so getting applicators and materials to site is simple. Nearby places we also cover include Stoneywood (1 mile south), Newhills (2 miles south), Bucksburn (2 miles south), Corsehill (2 miles north-east) and Danestone (3 miles south-east) for washrooms and wet areas. Nearby towns on our patch include Aberdeen (4 miles south-east), Rosemount (5 miles south-east), Berryden (4 miles south-east), Ferryhill (6 miles south-east), New Aberdeen (5 miles south-east) and Tillydrone (4 miles south-east). Dyce is one of the busier places in Aberdeen, and its commercial and public buildings are all within our area.
Near you in Dyce
Dyce has its own railway station: Dyce station. Well-known places in the area include Woodend Hospital (3.8 miles south). Green spaces nearby include Badgers' Hill and Corby Loch.
Should maintenance staff do it?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Common questions from Dyce clients
Will our hotel in Dyce need to close for the work?
In most cases no closure is needed: we work room by room or floor by floor. Tell us your quiet periods and access windows and we will plan around them.
Can you take on a job at a hospital such as Woodend Hospital?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Will all the toilets be closed at once?
The work is phased so there are always facilities open. We work through the building a room or section at a time around your site hours and access windows.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Quoting for work in Dyce
Each job is priced on its own details. The things that drive the figure:
- Phasing around occupants
- How much existing material needs removing
- The site’s rules and procedures
- Joint width, depth and condition
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
Before you send an enquiry
The more we know, the firmer the quote. When you get in touch, include:
- The postcode of the building
- When you need the work done
- Drawings or a marked-up plan, if available
- Access details, including height
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
How a job runs
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work normally takes half a day to a day per washroom, depending on the number of fittings. City jobs in Dyce usually need parking and loading planned. Tenement closes, shared stairs and factor approvals may also be involved.
- We agree which washrooms close and when.
- Leaks, loose panels or damp are pointed out first.
- Failed sealant and residue are stripped out.
- We reseal with the grade suited to each area.
- We give you a reopening time for every room.
What we need from you
- Tell us which areas need to stay in use
- Share the asbestos register for older buildings
- Flag any permit to work we’ll need
Getting a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to speak to us on 01277 525 020 or email drawings and photos.
Advice
Building owners, agents and FMs in Dyce
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Dyce can sit alongside others in a wider programme.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Dyce. Several sites can go on one quote, which keeps the paperwork simple.
Keeping the joints sound
Regular inspection catches problems early. Specifically:
- Tell us about infection-control or permit rules before we quote
- Report faulty extraction promptly
- Add sealant joints to planned maintenance checks
- Don’t leave trays and floors sitting wet
Mild cleaning products and non-abrasive cloths look after sanitary silicone best. Strong acids, solvents and scourers wear the surface and give mould a start.
A split joint at a shower tray can leak for a long time before anyone sees it. By then, other trades may be needed as well so failed joints are worth acting on quickly.