Greater London · England
Commercial sealant contractors in SW19
Sealant work for contractors, FMs and building owners across SW19, from Wimbledon, South Wimbledon and Merton Abbey, with a fixed quote before we start.
Need sealant work in SW19?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Towns and villages in SW19
- Wimbledon
- South Wimbledon
- Merton Abbey
- Wimbledon Chase
- Merton Park
- Crooked Billet
- Wimbledon Park
- Merton
- Putney
- Colliers Wood
- Tooting
- Tooting Bec
- Southfields
- Earlsfield
- Summerstown
- Bushey Mead
- Copse Hill
- Putney Vale
Our services across SW19
- Construction and new-build mastic
- Coloured and colour-matched sealant
- Facade and window perimeter sealing
- Industrial and floor joint sealing
- Mastic sealing for building owners and managing agents
- Expansion and movement joint sealing
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Commercial sealant contractors
- Every service
Let us know the job and your postcode for a fixed quote: speak to us on 01277 525 020 or use the quote form.
About commercial sealant contractors in SW19
We’ve applied sealant on commercial sites for over 20 years, and the documents buyers ask for are ready: CHAS accredited, Constructionline member, five million pounds of public liability insurance and CSCS-carded applicators. If your site needs RAMS, an insurance certificate or CSCS details, say so and we’ll confirm with the quote. We work on washrooms and tea points, window and door perimeters and floor and threshold joints, and the usual reasons a site gets in touch are black mould through washroom sealant that won’t clean off and movement joints packed with grit and debris.
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then handed back before the next one starts.
- Site photographs, drawings or a visit tell us what’s there and how it has failed.
- A fixed quote follows, with removal and preparation included.
- We agree the order of work, access windows and site hours with you.
- The failed sealant comes out and the faces are prepared, with primer where required.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- We hand back each area with its cure time and our 12-month guarantee.
What you’ll pay
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
Why appoint us
- Failed material removed, not covered up
- CSCS-carded applicators
- Matching to RAL references, product permitting
- CHAS accredited
Ask for a quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Landmarks near Wimbledon
We work on buildings around Cannizaro Park, Wimbledon High School and Dog & Fox pub. Nearby too are Bishop Gilpin CofE Primary School (less than half a mile north-east), St. Mark's Church (less than half a mile south-east) and Willington School (less than half a mile east). There’s a railway station in Wimbledon itself: Wimbledon station. Other landmarks nearby include Atkinson Morley Hospital (1.2 miles west) and Wimbledon Museum (less than half a mile west). Not far away are Battersea Park Lake and Merton Park Green Walks.
Where commercial joints are in SW19
In SW19, much commercial sealant work follows refits in shops, offices and hotels in places such as Wimbledon, Putney and Colliers Wood. Visible joints call for a matched colour and a clean tooled finish.
London and the South East are among the drier parts of the UK, though outside work in SW19 still waits for dry faces, and cold mornings bring frost and condensation on steel and glass.
Wimbledon: For premises near Wimbledon station, less than half a mile south-east of Wimbledon, footfall is part of the plan: work is phased so shops and offices keep trading. For a hotel such as Justin James Hotel (less than half a mile south of Wimbledon), the colour of a joint at the bar or the bath matters to the look of the room.
Surface by surface
Movement joints in walls and floors
Brickwork, blockwork and floor slabs all have movement joints that need a flexible seal. When the seal fails, debris gets in and the joint stops working. The new sealant is chosen for the movement and, on floors, the traffic.
Washrooms and toilets
Mould that has grown into washroom sealant can’t usually be cleaned out. The lasting answer is removal, preparation and a new sanitary bead.
How the quote is worked out
Quotes vary with the job. It mainly depends on:
- Joint width, depth and condition
- How much existing material needs removing
- Which sealant the job calls for
- Location, for remote and island sites
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote and we will price your job on its own details.
Details that help us quote
We can often quote from photos and a few details. Please tell us:
- Whether the building will be occupied during the work
- Anything awkward about access or site hours
- Photos of the joints, close up and from further back
- Specification clauses that apply
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, call 01277 525 020 or use the quote form.
Honest limits
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Misted, cracked or failed glazing units (a glazier’s job)
- Water from a services leak rather than a joint
- Old mastic that tests positive for asbestos
Work for main contractors and building owners
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
After the work
For the best life from the joints:
- Put external and wet-area joints on a regular inspection round
- Look at the sealant around anything that has been moved or replaced
- Note dates and locations of sealant work for future planning
- Ask cleaners to use a soft cloth and mild cleaner on sealant
Brief your cleaning team on the joints that have been resealed. Scourers, blades and harsh products shorten a bead’s life.
An open joint in a food area or toilet collects dirt and moisture that cleaning can’t reach. Environmental health officers look at how cleanable surfaces are, which makes sound joints worth keeping on top of.
Questions about SW19
Is failed sealant stripped out, or sealed over?
Removal comes first, every time. After that come cleaning, primer where needed, backing and the new sealant.
Is your work guaranteed?
It’s backed by our 12-month guarantee. Should anything we did fail within that period, let us know.
How is commercial sealant work priced?
Photos, drawings or a schedule of the joints are usually enough to start through the quote form on this site. Where we need to see it, we will arrange a site visit, then send a fixed quote.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
How do you choose the sealant?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Can areas stay open during the work?
It’s normal for us to work in occupied buildings. Only the area being sealed is closed, and the sequence is agreed in advance for as long as the cure needs.