Greater London · England
Commercial sealant contractors in SW17
Our applicators cover all of the SW17 postcode district, including Colliers Wood, Tooting and Tooting Bec. Failed sealant is always cut out completely, with a 12-month guarantee.
Mastic and sealant across SW17
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Where we work in SW17
- Colliers Wood
- Tooting
- Tooting Bec
- Summerstown
- Wimbledon
- Balham
- Eastfields
- South Wimbledon
- Southfields
- Furzedown
- Earlsfield
- Merton Abbey
- Streatham Park
Services in SW17
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Industrial and floor joint sealing
- Expansion and movement joint sealing
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Construction and new-build mastic
- Every service
Let us know the job and your postcode for a fixed quote: give us a call on 01277 525 020 or send details through our quote form.
How commercial sealant contractors works in SW17
Getting a price for commercial sealant contractors in SW17 doesn’t need to be drawn out. Our quote form takes photos, drawings or a schedule of the areas and you can also phone 01277 525 020 or email us to talk it through. Where the photos don’t tell the full story, we arrange a site visit, and a fixed quote for the agreed scope follows. We work on movement joints in walls and floors, kitchen worktops and splashbacks and floor and threshold joints, and the usual reasons a site gets in touch are untidy joints in a reception, shop floor or lobby and sanitary sealant that has gone black and patchy.
Working in a building that stays open takes some planning. We sign and contain the area we are in, with routes through the building left open and move on in phases so staff and visitors can carry on around us.
- We start with the evidence: photographs, drawings or a look on site.
- You get a fixed quote covering removal, preparation and the new sealant.
- Sequence, access and working times are settled before the first joint is touched.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Backing goes in, the new sealant is laid and tooled, and the area is left neat.
- We hand back each area with its cure time and our 12-month guarantee.
What affects the price in SW17
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why choose Mastic Doctor
- Colour agreed before work starts
- Failed material removed, not covered up
- A fixed quote before work starts
- Products installed to the manufacturer’s instructions
Quotes
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. If you have questions first, speak to us on 01277 525 020 or use the quote form.
Near you in Colliers Wood
Around Colliers Wood, our work takes us to commercial buildings near St Nicholas, The Royal Standard pub and Graveney School. Also close by are Figge's Marsh (0.5 miles south-east), Ensham School (0.5 miles north-east) and Sellincourt Primary School (less than half a mile north). There’s a railway station in Colliers Wood itself: Tooting station. A little further out are Grove Hospital (0.6 miles north) and Wandle Industrial Museum (1.2 miles south). Not far away are Henman Hill and Myrna Close.
Shops, offices and hotels in SW17
Commercial buildings across SW17 range from older premises altered many times to recent units on business parks. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.
The South East is one of the UK’s drier regions, but external sealing in SW17 still needs a dry joint and the right temperature, and damp or frosty mornings can hold it up.
Colliers Wood: Premises within reach of Tooting station, less than half a mile to the east of Colliers Wood, often have busy frontages where joints are seen by everyone passing. If you have premises on more than one site, say at College Fields Business Centre and Priory Retail Park, one contractor and one quote can cover both.
Keeping the joints sound
After handover, a little attention goes a long way:
- Add sealant to the planned maintenance inspection list
- Report cracked or peeling sealant early
- Look at the sealant around anything that has been moved or replaced
- Check the asbestos register before anyone disturbs old sealant in an older building
In washrooms and kitchens, extraction makes a real difference to sealant life. Fans that are broken or switched off leave joints damp for longer, which is how mould gets back in. Your maintenance team can look at extract fans at the same time.
In kitchens and washrooms, a failed joint is a cleaning problem as well as a leak risk. Environmental health officers look at how cleanable surfaces are.
Owners, agents and contractors
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. SW17 can form part of a wider programme.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
Different surfaces, different methods
Commercial kitchens and tea points
Gaps and ragged beads trap dirt that cleaning can’t reach, and cleanability is part of what an inspector looks at. We seal to a neat, cleanable finish and work around service times you agree with us.
Washrooms and toilets
Black sealant in a toilet block is normally beyond cleaning. The lasting answer is removal, preparation and a new sanitary bead, planned so the building keeps enough facilities in use.
Common problems we fix in SW17
The wrong sealant in the wrong place is a common cause of early failure. Decorators’ caulk on a joint that moves, acetoxy silicone on stone or metal, or a stiff sealant on a facade all let go sooner than they should. Guidance such as BS 6213 exists to steer sealant selection for exactly this reason.
Any of the following is a good reason to get the joints checked over:
- Earlier reseals applied straight onto the failed bead
- Damp patches where an external joint has failed
- Sanitary sealant that has gone black and patchy
- Expansion joints with the sealant torn out
How the quote is worked out
A fixed quote reflects the actual work. It takes account of:
- Access and working height
- Specialist products, such as fire-rated or hygienic sealants
- Phasing around occupants
- Induction, permit and paperwork requirements
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What we need to price the job
For an accurate fixed quote, we need a clear picture of the site. Send us:
- The postcode of the building
- Any dates the work must fit around
- The type of building and who uses it
- Rough lengths or quantities, or drawings if you have them
To get a fixed quote, call the office on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Questions about SW17
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Is your work guaranteed?
The work is guaranteed for 12 months. Should a joint we sealed give trouble during those 12 months, let us know and we’ll look at it.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day.
Do you check for asbestos before removing sealant?
We check the asbestos register or survey before any old sealant is disturbed. The duty to manage asbestos sits with the dutyholder and removing it isn’t something we do.
Do you work in SW17?
Yes. We cover SW17, and you can call 01277 525 020 or send details through our quote form to get started.
Do you seal on top of existing sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Can areas stay open during the work?
It’s mostly about sequence: we agree access windows, phase the work and keep enough facilities open. Let us know what can’t close and we will work around it.