Floor Joint Sealing contractors in New Alresford
Floor joint sealing and filling in warehouses, factories and industrial units in New Alresford. CHAS accredited and fully insured, with a 12-month guarantee.
- Scruffy, dirty joint lines on a shop or showroom floor
- Joint fill separating from the concrete
- Sealant pulled out along a truck route
Floor joint sealing for businesses in New Alresford
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in New Alresford
Some joints reach us with their edges already broken. A filler laid against broken edges has nothing sound to grip, so if the edges need repair before any filling, we will say so and leave that decision with you. If you are dealing with unfilled floor joints collecting dirt and grit and failing joints at loading bays and dock doors, we can put it right, on joints along racking aisles, saw-cut induced joints and construction joints alike. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in New Alresford is the same: the right product in a properly prepared joint.
Work in a smaller place like New Alresford is typically one building at a time. That way the right materials come on the day and the job is done in one visit where possible.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- New Alresford (SO24)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What we can’t put right
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Wide or random cracking that suggests a structural issue
- Unstable slabs moving under traffic
- A failing floor coating, which is a flooring contractor’s job
If you’re not sure, just call 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
Surfaces we seal
- Construction joints
- Forklift and pallet-truck routes
- Joints along racking aisles
- Retail and showroom floors
- Saw-cut induced joints
- Loading bays
Questions about New Alresford
Is New Alresford off your patch?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
Do we have to stop operations in New Alresford while the joints are sealed?
Typically not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
Should floor joints be filled or sealed?
There isn’t one answer for a whole floor. Where hard wheels cross, a semi-rigid filler is usually right, and movement joints or perimeters need something flexible. You’ll see the choice for each area in the quote.
What site paperwork can you supply?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
How soon can traffic go back on the floor?
Each product has its own cure time, and cold floors slow it down. We plan the phasing so that waiting time fits your operation.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. We’ll give you an estimate of time on site when we quote.
What information helps you price floor joint sealing?
Approximate metres of joint, photographs of typical and worst areas, and a floor plan are normally enough for a quick quote. For larger floors, a site visit is often best so give us a call on 01277 525 020 or use the quote form to set one up.
Looking after the joints
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Tell us about strong cleaning chemicals before we quote
- Remind operators to lift rather than drag
- Put loading bays at the top of the list
- Plan for a top-up on newer floors
Young concrete carries on shrinking, so some fillers part slightly from one face. It is a known trait of new floors and a later top-up deals with it in the majority of cases.
Edges tend to break slowly at first, then quickly. Each chip makes the drop deeper and the next impact harder, so it pays to act at the first signs.
What the job involves on each surface
Saw-cut induced joints
Induced joints are sawn into a new slab to control where it cracks. They are narrow but open up as the panels shrink so trafficked runs need a filler that holds the arrises.
Construction joints
Day joints vary, with or without armoured edges. We will tell you if the edges or any armouring look like they need attention before filling.
Nearby places to New Alresford
Also in New Alresford
What happens if it’s left?
Tape, or whatever sealant is in the stores cupboard, may look like a fix for a while. Neither is made to carry wheels and traffic soon pulls it out. A product chosen for the traffic and movement does the job once. For buildings in places like New Alresford, one well-planned visit beats several small ones, so we’d suggest renewing all the joints that are going, not just the worst.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What you get with us
- CSCS-carded applicators
- Fully insured, including public liability cover
- Workmanship guaranteed for 12 months
- A Constructionline member, so easy to vet
See what affects the cost or our accreditations and insurance.
Our process
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. If neighbouring businesses or buildings around New Alresford need work too, visits can be combined. Tell us your site hours and we’ll plan around them.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- We vacuum each run and prime it if the chosen product requires a primer.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- The area is handed back once it has cured enough to take traffic.
Getting the site ready
- Let building users know which areas are affected
- Point out any areas we must not close
- Confirm the product named in the specification
Get a fixed quote
For a fixed quote, call the office on 01277 525 020 or email drawings and photos. Our quote form is another easy route.
Related advice
Where floor joints take the most wear near New Alresford
Rainfall across the South East, New Alresford included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in. At about 54 miles from central London, New Alresford is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors.
Around New Alresford, each joint gets a filler or sealant matched to what crosses it and how much it moves. Schools such as Sun Hill Junior School have movement joints in their walls and floors that are easy to overlook.
New Alresford is about 7 miles east of Winchester, in Hampshire. Businesses, contractors and managing agents in New Alresford use us for work on floor joints. We work across 723 places in Hampshire, from busy centres to rural villages. Southampton is covered too, some 15 miles away.
Business premises anywhere in SO24 are within our area for floor joints. Buildings on Station Road, Elm Road and Bramble Hill are within our area for floor joints. You will find New Alresford on or near the B3046 and B3047. Close to New Alresford, our area also takes in Bishop's Sutton (2 miles east), Gundleton (2 miles east), Cheriton (2 miles south), Hinton Ampner (3 miles south) and Bramdean (3 miles south-east). A short drive away, we cover Basingstoke (13 miles north), Winchester (7 miles west), Eastleigh (11 miles south-west), Horndean (14 miles south-east), Chandler's Ford (12 miles south-west) and Alton (9 miles north-east).
Landmarks near New Alresford
Recent enquiries here include premises near The Running Horse Public House and Perins School and the streets around them. Nearby you’ll also find Barton Castle (4.3 miles north-east). The countryside around New Alresford includes Shutts Copse.
How the quote is worked out
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Whether old sealant has to be cut out first
- Backing rod, priming and other preparation
- How accessible the joints are
- Travel to remote or island sites
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- The postcode of the building
- The type of building and who uses it
- Whether an asbestos survey exists
- Anything awkward about access or site hours
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or ring 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.