Surrey · England
Commercial sealant contractors in RH6
Sealant work for contractors, FMs and building owners across RH6, covering Horley, Smallfield and Hookwood, with a fixed quote before we start.
Mastic and sealant across RH6
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Towns and villages in RH6
- Horley
- Smallfield
- Hookwood
- Charlwood
- Burstow
- Keeper's Corner
- Shipley Bridge
- Fernhill
- Horne
- Norwood Hill
- Russ Hill
- Crawley
- Copthorne
- Forge Wood
What we do in RH6
- Industrial and floor joint sealing
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Expansion and movement joint sealing
- Fire-rated sealing and fire stopping
- Construction and new-build mastic
- All services
Tell us what needs doing and your postcode and we’ll come back with a price: give us a call on 01277 525 020 or email drawings and photos.
Commercial sealant contractors in RH6: how it works
How long a joint lasts is decided before any sealant leaves the gun. Old silicone gives new sealant nothing to grip, so every trace of it is removed, then both faces are cleaned back to sound, dry material with no dust or grease on them. Primer is used wherever the manufacturer calls for it on that surface and the joint depth is controlled with backing rod. The enquiries we see most involve mouldy silicone around WCs, urinals and vanity tops and greasy, split joints in a kitchen or tea point, on floor and threshold joints, external facade joints and movement joints in walls and floors.
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area.
- Site photographs, drawings or a visit tell us what’s there and how it has failed.
- You get a fixed quote covering removal, preparation and the new sealant.
- We agree the order of work, access windows and site hours with you.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- Completed areas are signed off with you under our 12-month guarantee.
How we quote
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why clients in RH6 choose us
- Constructionline member for supplier checks
- Commercial sealant work since 2005
- Old sealant cut out, never sealed over
- Our applicators hold CSCS cards
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, speak to us on 01277 525 020 or email us.
Local landmarks in Horley
Around Horley, our work takes us to commercial buildings near Oakwood School, Horley Infant School and St Wilfrid's Church. The closest station to Horley is Horley station, roughly 0.8 miles south-east of the centre. Nearby you’ll also find Reigate Castle (4.5 miles north) and East Surrey Hospital (2.8 miles north). For a walk, there’s Reigate Heath.
Where commercial joints are in RH6
The commercial stock in RH6 mixes older town-centre buildings with newer offices and units, in places such as Crawley, Horley and Copthorne and beyond. Surfaces decide the sealant, from masonry to powder-coated frames and shop-fit panels.
All of Greater London is inside the ULEZ, and much of the South East is within easy reach of the capital, and every job in RH6 starts with access, parking and site rules.
Horley: Shops and cafés around stations like Horley station (0.8 miles south-east of Horley) trade from early, so work is timed around them. If you have premises on more than one site, say at Gatwick Business Park and Salbrook Road Industrial Estate, one contractor and one quote can cover both.
What sets the cost
We price every job individually. The things that drive the figure:
- How much there is to seal
- The site’s rules and procedures
- Joint width, depth and condition
- Distance, for remote addresses
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Before you send an enquiry
There’s no need for a formal survey. A few details are enough to get going:
- Your programme or deadline
- A wide shot and a close-up of the area
- The product your specification calls for
- How the joints are reached, and at what height
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or send details through our quote form.
Doing it in-house
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Different surfaces, different methods
Commercial kitchens and tea points
A smooth, continuous joint is easier to keep clean, and cleanability is part of what an inspector looks at. We seal to a neat, cleanable finish and work around service times you agree with us.
Window and door perimeters
The perimeter joint between a frame and the structure keeps rain out of the reveal. We remove the old seal, prepare the faces, fit backing where needed and seal again with a product chosen for both the frame and the wall.
For managing agents and facilities managers
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Why it fails
External sealant takes a steady beating from the weather. Sunny elevations dry the surface out and exposed ones take driving rain. A hardened bead can’t follow the building any more.
Most enquiries start with something like this:
- Black mould through washroom sealant that won’t clean off
- Movement joints packed with grit and debris
- Damp patches where an external joint has failed
- Window and door perimeter joints that have cracked open
Questions we’re asked in RH6
How do we get a quote?
Send what you have, even a few photos and rough lengths. We follow up with questions or a visit where needed, and then a fixed quote for the agreed scope.
Do you work in RH6?
Yes. We cover RH6, and you can call 01277 525 020 or email drawings and photos to get started.
Is the old sealant taken out first?
Removal comes first, every time. Then the joint is cleaned, primed where the maker specifies, backed to depth and resealed.
Is your work guaranteed?
Our workmanship on each job is backed by a 12-month guarantee. We are fully insured for public liability as well.
Can you supply RAMS and insurance details?
The paperwork is agreed with the quote: most clients ask for RAMS, our insurance certificate and CSCS details. Every applicator holds a CSCS card.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
Will you just go over the old sealant?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.