Facade Sealing in Bognor Regis
We carry out facade joint and window perimeter sealing on commercial buildings in Bognor Regis and the surrounding area. Send details for a fixed quote.
- Air leaks through failed facade joints
- Facade joints cracked through the middle
- Leaks at window and door perimeters
Facade sealing across Bognor Regis
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle facade sealing in Bognor Regis
Our facade sealing work covers external facade joints, window and door perimeters, cladding panel joints and the perimeter joints where frames meet the structure on offices, blocks and industrial units. Where sealant is the specified fix, we also take on coping and flashing joints. The enquiries we see most involve draughts around frames and panels and sealant pulling away from frames or panels, across shopfront frames, stone and brick facade joints and coping and flashing joints. Most enquiries from Bognor Regis start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
On larger schemes in and around Bognor Regis, mastic is often programmed plot by plot or floor by floor. CSCS-carded applicators work to the site’s rules and the specification, and any snags are cleared before handover.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Bognor Regis (PO21, PO22)
- Wider area
- West Sussex
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Your questions answered
Is Durban Road Industrial Estate, near Bognor Regis, within your area?
Yes, sites like Durban Road Industrial Estate are within our area, along with the rest of Bognor Regis. To start, just call the office on 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
Our building in Bognor Regis is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Will you come and look before quoting?
Many jobs can be quoted from photos, drawings or a joint schedule. Where they aren’t, we arrange a site visit.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Do you cover Bognor Regis?
Yes. Sites across Bognor Regis are covered, and the same phone number covers every area.
Doing it in-house
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
What sealant work can’t fix
Being straight saves everyone time. Fresh joints won’t solve:
- Render or concrete edges that have broken away
- Arranging specialist high-level access, which is planned with the client
- Joints too narrow for the movement they take, which need redesign
Not sure which it is? You can call 01277 525 020 or email us and we’ll tell you honestly before you book.
Surfaces we seal
- Shopfront frames
- Coping and flashing joints
- Stone and brick facade joints
- Window and door perimeters
- Perimeter joints where frames meet the structure
- Cladding panel joints
How the job changes by surface
Perimeter joints at frames and structure
Perimeter joints at frames often show their age first. We cut them out, prepare both faces and reseal to the specification with a product suited to glazing perimeters.
Render and coated surfaces
Where the joint will be painted over, a paintable hybrid or PU sealant may suit. The choice depends on the specification and finish.
What else we do in Bognor Regis
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Check that rainwater leaves the facade the way it was designed to
- Walk the elevations once or twice a year
- Keep pressure washers away from fresh sealant
- Combine resealing with other works that need access
Hold back any cleaning crew until the joints have had their stated cure time. Keep high-pressure jets and strong chemicals away from new sealant, so brief your window cleaners.
Check older buildings for asbestos before disturbing old mastic. Some older mastics contain it, and if it’s suspected, we stop until it has been tested.
Sites and facades in and around Bognor Regis
With the shore within about 1 mile, Bognor Regis counts as a coastal location. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so we check the specified product suits the exposure before the first bead. A 2-mile radius around Bognor Regis takes in plenty of hotels. Hotel schemes tend to have fixed reopening dates, so the mastic is programmed tightly with the other trades.
For contractors on a campus like University of Chichester (Bognor Campus) (1 mile east of Bognor Regis), facade and perimeter sealing has to fit around students and term dates. Extensions at sites like Bognor Regis War Memorial Hospital, 0.5 miles east of Bognor Regis, usually sit beside working departments, and the mastic follows strict access rules. When units on a site such as Durban Road Industrial Estate, 0.8 miles north-east of Bognor Regis, are refurbished or reclad, the panel joints and window perimeters are part of the mastic package.
Bognor Regis is in West Sussex. Businesses, contractors and managing agents in Bognor Regis can call on us for facade joints. 373 places across West Sussex fall within our area, Bognor Regis among them. We also cover Portsmouth, around 17 miles from Bognor Regis.
Commercial sites across PO21 and PO22 are covered for facade joints. For a building on Station Road, London Road and Manet Square or nearby, send details and we’ll quote for facade joints. Main routes into Bognor Regis include the A29 and A259. We also cover South Bersted (1 mile north-east), Aldwick (1 mile south-west), Felpham (1 mile east), Shripney (2 miles north-east) and Lagness (2 miles west) for facade joints. Nearby towns on our patch include Worthing (13 miles east), Chichester (5 miles north-west), Selsey (6 miles south-west), Littlehampton (7 miles east), Rustington (8 miles east) and Storrington (14 miles north-east). As one of the bigger centres in West Sussex, Bognor Regis has a broad mix of commercial, public and industrial buildings, and we cover them all.
Near you in Bognor Regis
Recent enquiries here include premises near Norfolk Hotel, Southway Primary School and West Park, among other places. For rail, the closest station is Bognor Regis station, roughly 0.5 miles south-east. Nearby you will also find Bognor Regis War Memorial Hospital (0.5 miles east) and Tote Copse Castle (3.1 miles north).
Our process
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For premises in central Bognor Regis, deliveries and parking need a bit of planning, while out-of-town estates usually have yards and car parks. Either way, tell us what’s available.
- We start with photographs, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full and both faces cleaned back.
- Primer is applied where the maker specifies it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- We go over the completed work with you before leaving.
Getting the site ready
- Tell staff and tenants when we’ll be in
- Tell us which areas need to stay in use
- Let us know about inductions and permits
Get a fixed quote
For a fixed quote, phone 01277 525 020 or email a schedule or drawings. You can also send details through our quote form.
Advice
Owners, agents and contractors
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.