Kent · England
Commercial sealant contractors in DA13
Commercial sealant, construction mastic and joint sealing across DA13, covering Meopham, Istead Rise and Culverstone Green, with a fixed quote before we start.
Mastic and sealant across DA13
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Where we work in DA13
- Meopham
- Istead Rise
- Culverstone Green
- Vigo Village
- Sole Street
- Southfleet
- Betsham
- Harvel
- Hook Green
- Priestwood
- Foxendown
- Henley Street
- Round Street
- South Street
- Westwood
- Northfleet Green
- Luddesdown
- Nash Street
- Priestwood Green
- Dartford
- Painters Ash
- New Barn
- Springhead
- Singlewell or Ifield
Services in DA13
- Facade and window perimeter sealing
- Commercial washroom and wet-area sealing
- Industrial and floor joint sealing
- Commercial sealant contractors
- Construction and new-build mastic
- Coloured and colour-matched sealant
- Expansion and movement joint sealing
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- See all services
Tell us what needs doing and your postcode for a fixed quote: phone 01277 525 020 or email drawings and photos.
Districts next door
Elsewhere in Kent
All places in Kent
Every area we cover
About commercial sealant contractors in DA13
Having a single contact for all your sites makes sealant far simpler to manage. Single jobs, multi-site packages and planned programmes all come to us, run the same way on every site: send details, get a fixed quote, we seal, and a 12-month guarantee once it’s signed off. For sites in DA13, the quickest start is to ring 01277 525 020 or send details through our quote form with a list of addresses. Site teams most often ask us about messy, uneven beads from earlier work that let the building down and layers of sealant, all of them failing, across floor and threshold joints, external facade joints and window and door perimeters.
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off.
- Site photos, drawings or a visit tell us what’s there and how it has failed.
- A fixed quote follows, with removal and preparation included.
- We agree the order of work, access windows and site hours with you.
- The failed sealant comes out and the faces are prepared, with primer where required.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- Completed areas are signed off with you under our 12-month guarantee.
How we quote
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Why choose Mastic Doctor
- Specification-led, product-correct work
- A range of standard colours, depending on the product
- Fully insured, including public liability cover
- Clear, fixed quotes
Request a quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to speak to us on 01277 525 020 or email the details over.
What’s near Meopham
In Meopham, that means premises near Camer Park Country Park, Meopham Community Academy and Parish Church of St John the Baptist. Other local landmarks include The Railway Inn (0.9 miles east) and Meopham School (0.8 miles south). The closest station to Meopham is Meopham station, roughly 0.5 miles north of the centre. A little further out are Gravesham Community Hospital (4.4 miles north). Open spaces near Meopham include Sawyers Lake and Gad's Hill.
Commercial premises across DA13
Commercial buildings across DA13 range from older premises altered many times to recent units on business parks. Surfaces decide the sealant, from masonry to powder-coated frames and shop-fit panels.
The South East has large numbers of business parks and industrial estates, especially around the motorway corridors, and DA13 is part of the area we cover. DA13 includes coastal places, where facades, frames and external slabs take more weather than inland. We take that exposure into account when choosing the product.
Meopham: Trade counters and showrooms on estates such as Bowes Industrial Centre, 1.3 miles to the south of Meopham, need neat joints where clients see them. Offices and shops close to stations such as Meopham station, 0.5 miles north of Meopham, tend to be busy all day, so sealant work is planned around opening hours.
Honest limits
Some faults sit outside our scope, and we say so rather than covering them up:
- A failed roof covering or waterproofing membrane
- A dripping trap, valve or pipe behind a fitting
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
Surface by surface
Fire-rated seals where specified
Fire-rated sealant is only one type of fire-stopping product. Other products, such as collars, wraps and batts, are specified for different services, so we’ll flag it if the detail needs a different product.
Movement joints in walls and floors
Movement joints in walls and floors let the structure expand and contract. Failed seals let grit and water in, and the edges start to suffer. The joints are resealed using a sealant matched to the movement and any traffic.
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Why it fails
The wrong sealant in the wrong place is a common cause of early failure. Painters’ acrylic in a moving joint, vinegar-smelling silicone on metal or natural stone, or a high-modulus product where a low-modulus one was needed. BS 6213 gives guidance on choosing construction sealants, and many specifications refer to it.
Clients usually get in touch after noticing something like this:
- Water staining near frames, panels or ceilings
- Untidy joints in a reception, shop floor or lobby
- Wall and floor joints that have lost their seal
- Frame sealant that has cracked, shrunk or pulled away
What affects the price in DA13
Before we quote, we look at:
- Access and working height
- The site’s rules and procedures
- Whether the work must be split into stages
- Distance, for remote addresses
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we’ll explain how it’s made up.
What we need to price the job
A few photos plus some basic facts will normally do. Please tell us:
- When you need the work done
- A wide shot and a close-up of the area
- Drawings or a marked-up plan, if available
- The product your specification calls for
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or send details through our quote form.
FAQs: DA13
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
Do you take on multi-site sealant work?
Yes, within the areas we cover: South East England, Greater London and Scotland. Each site gets the same process and a single contact.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Who decides which product is used?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Is DA13 in your area?
Yes. We cover DA13, within our coverage of Greater London, South East England and Scotland. To discuss a job, call 01277 525 020 or email a schedule or drawings.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
What about asbestos in old mastic?
It’s possible in older buildings, especially those built before 2000. We ask to see the asbestos register or survey before disturbing old sealant, and anything suspect is left until it has been tested.