Greater London · England

Commercial sealant contractors in CR5

We cover every part of the CR5 postcode district, including Coulsdon, Old Coulsdon and Netherne on-the-Hill. Every joint is properly prepared, with a 12-month guarantee.

Mastic and sealant across CR5

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

How commercial sealant contractors works in CR5

On a commercial site, sealant turns up in more places than people expect: washroom fittings, kitchen worktops, window boards, partition heads and the line where floors meet walls. Outside, it closes facade joints, frame perimeters and movement joints against the weather. We deal with internal and external sealant joints alike. We work on kitchen worktops and splashbacks, window and door perimeters and external facade joints, and what we’re called in for most is water staining near frames, panels or ceilings and gaps behind commercial kitchen worktops and sinks.

Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself normally takes a few hours for one area, or a planned series of visits across a bigger building, and our waste is bagged and taken away as we go.

  1. We start with the evidence: photos, drawings or a look on site.
  2. You get a fixed quote covering removal, preparation and the new sealant.
  3. We agree the order of work, access windows and site hours with you.
  4. Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
  5. Depth is set with backing, then the sealant is applied, tooled and the area tidied.
  6. Completed areas are signed off with you under our 12-month guarantee.

Pricing in CR5

Pricing sealant joints depends on how many there are, their condition and the access, plus any specification you are working to. Call for a quote.

Why appoint us

  • One phone line for London, the South East and Scotland
  • CSCS-carded applicators
  • RAL and finish matching where the product range allows
  • Colour agreed before work starts

Quotes

Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or email a schedule or drawings.

What’s near Coulsdon

In Coulsdon, that means premises near Dollypers Hill, The Pembroke pub and St Andrew's Church. You will also find Smitham Primary School (less than half a mile north-west) and Coulsdon Sixth Form College (1 mile south-east). Coulsdon has its own railway station: Coulsdon South station. A little further out are Croydon Airport Visitor Centre (3 miles north) and Purley War Memorial Hospital (2 miles north-east). Green spaces nearby include Duppas Hill and Mercers Lake.

Commercial sealant contractors across CR5: the area picture

The commercial stock in CR5 mixes older town-centre buildings with newer offices and units, in places such as Coulsdon, Purley and Old Coulsdon and beyond. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.

London and the South East are among the drier parts of the UK, though outside work in CR5 still waits for dry faces, and cold mornings bring frost and condensation on steel and glass.

Coulsdon: Shops and cafés around stations like Coulsdon South station (to the south-west of Coulsdon) trade from early, so work is timed around them. With Coulsdon inside the ULEZ and kerb space scarce, we sort access and loading before the first day on site.

Should maintenance staff do it?

There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.

Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.

What sets the cost

Quotes vary with the job. Expect it to depend on:

  • How much existing material needs removing
  • The total length or number of joints
  • The size and state of each joint
  • Location, for remote and island sites

Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.

Before you send an enquiry

For an accurate fixed quote, we need a clear picture of the site. Useful things to include:

  • Whether the building will be occupied during the work
  • Approximate linear metres or a joint schedule
  • Whether an asbestos survey exists
  • The postcode of the building

We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, phone 01277 525 020 or send details through our quote form.

Different surfaces, different methods

Washrooms and toilets

Black sealant in a toilet block is normally beyond cleaning. The lasting answer is removal, preparation and a new sanitary bead.

Facade and cladding joints

Panel joints on cladding and rendered facades open and close with the temperature. The product has to suit the movement, and the depth has to be controlled with backing. Access, such as scaffold already up, is agreed before the price is fixed.

Owners, agents and contractors

We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.

Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.

Leave it or put it right?

Before budgeting for new frames, cubicles or worktops, check whether it’s just the sealant. Often the fitting is sound and the joint is the only thing letting it down. A careful reseal is a far smaller undertaking than replacement.

Comparing quotes

  • What level of public liability insurance do they hold?
  • Whether their applicators hold CSCS cards
  • Will failed sealant be removed rather than covered?
  • Health and safety accreditation such as CHAS

Your questions answered

Can areas stay open during the work?

It’s mostly about sequence: areas are phased, access windows agreed and enough washrooms or entrances left in use. Tell us what has to stay open and we will plan the job around it.

How many days will you need on site?

We plan the time on site around your programme and access. You will have an expected duration with the quote.

Could the old sealant in an older building contain asbestos?

We check the asbestos register or survey before any old sealant is disturbed. Managing asbestos is the dutyholder’s responsibility, and we don’t remove asbestos-containing materials.

How long do sealant joints last?

There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.

What do you need from us to quote?

The main factors are metres of joint, removal, access, the product and how many phases there are. To get a fixed price, send details through our quote form, or phone or email us.

Which site documents can you send us?

Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote. We hold CHAS accreditation and Constructionline membership and carry five million pounds of public liability insurance.

Does commercial sealant work come with a guarantee?

It’s backed by our 12-month guarantee. Should a joint we sealed give trouble during those 12 months, let us know and we’ll look at it.

Accreditations

Trusted. Accredited. Insured.