West Sussex · England
Commercial sealant contractors in BN16
Sealant work for contractors, FMs and building owners across BN16, from Rustington, Angmering and East Preston, with a fixed quote before we start.
Sealant contractors for BN16
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Towns and villages in BN16
- Rustington
- Angmering
- East Preston
- West Preston
- Angmering-on-Sea
- Kingston Gorse
- West Kingston
- Hammerpot
- Littlehampton
What we do in BN16
- Coloured and colour-matched sealant
- Construction and new-build mastic
- Expansion and movement joint sealing
- Commercial washroom and wet-area sealing
- Facade and window perimeter sealing
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- Commercial sealant contractors
- Industrial and floor joint sealing
- All services
Tell us what needs doing and your postcode and we’ll come back with a price: call the office on 01277 525 020 or send photos by email.
Neighbouring districts
Elsewhere in West Sussex
All places in West Sussex
Every area we cover
How commercial sealant contractors works in BN16
We have applied sealant on commercial sites for over 20 years: CHAS accredited, Constructionline member, five million pounds of public liability insurance and CSCS-carded applicators. Let us know which site documents you need and they’ll be confirmed with the quote. We work on floor and threshold joints, movement joints in walls and floors and kitchen worktops and splashbacks, and the failures we are asked to look at most are water staining near frames, panels or ceilings and smeared sealant across finishes from a rushed job.
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work usually takes part of a day on a small job and longer where several buildings or phases are involved.
- First, details reach us through the quote form or a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Work is phased around your occupiers where areas need to stay in use.
- Old sealant is cut out completely, never sealed over.
- Each joint gets a suitable sealant, laid to depth and tooled.
- A final walk-round, then the 12-month guarantee applies.
Pricing in BN16
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Why appoint us
- One phone line for London, the South East and Scotland
- Coloured sealants to suit the setting, where available
- Constructionline member for supplier checks
- Specification-led, product-correct work
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or email drawings and photos.
Around Rustington
Recent enquiries here include premises near Rustington Community Primary School, The Parish Church of St Peter and St Paul and The Littlehampton Academy. Nearby too are Mewsbrook Park (0.9 miles south-west) and Littlehampton College (1.2 miles west). Rustington’s nearest station is Angmering station, about 0.9 miles east of the centre. Well-known places in the area include Zachary Merton Hospital (under half a mile south-east) and Lyminster Siege Castle (3 miles north-west). Open spaces near Rustington include WWT Arundel and Highdown Hill.
Shops, offices and hotels in BN16
From Littlehampton, Rustington and Angmering outwards, BN16 has a broad spread of commercial premises: shops, offices, hotels, restaurants and units. We cover the whole area, so occupiers with several sites can use one contractor and one point of contact, with colours matched site to site where the brand needs it.
We work across Greater London and the South East counties, so jobs in BN16 are planned with access, loading and parking in mind. On the coastal side of BN16, sea-facing elevations typically show failed joints first.
Rustington: Offices and shops close to stations such as Angmering station, 0.9 miles to the east of Rustington, tend to be busy all day, so sealant work is planned around opening hours. If you have premises on more than one site, say at Rustington Trading Estate and The Vinery Industrial Estate, one contractor and one quote can cover both.
When it isn’t the sealant
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Misted, cracked or failed glazing units (a glazier’s job)
- Walls or slabs moving more than any sealant can take
- A dripping trap, valve or pipe behind a fitting
Building owners, agents and FMs in BN16
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in BN16 can sit alongside others in a wider programme.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Different surfaces, different methods
Movement joints in walls and floors
Floor joints that take trolleys or forklifts need a tougher filler or sealant. We’ll recommend the right filler or sealant for the traffic and movement.
Commercial kitchens and tea points
Gaps and ragged beads trap dirt that cleaning can’t reach. Work is timed around the hours you give us so the kitchen isn’t out of use longer than needed.
What happens if it’s left?
Before budgeting for new frames, cubicles or worktops, check whether it’s just the sealant. Often the fitting is sound and the joint is the only thing letting it down. A careful reseal is a far smaller undertaking than replacement, and we’ll say so if the frame or fitting is life-expired.
Comparing quotes
- Which product they’ll use, and why it suits the joint
- How they handle RAMS and site documents
- Do they follow the manufacturer’s priming guidance?
- What the guarantee covers, and for how long
Aftercare for building managers
After handover, a little attention goes a long way:
- Ask fit-out and M&E contractors to report any sealant they disturb
- Have extract fans checked so wet areas dry out
- Add sealant to the planned maintenance inspection list
- Check the asbestos register before anyone disturbs old sealant in an older building
Let your cleaning contractor know what’s new. Scourers, blades and harsh products shorten a bead’s life.
Occupiers often notice failing sealant before the facilities team does. Planned replacement saves fielding the same complaint again and again.
Your questions answered
Can you handle sealant work across several sites?
Yes. Give us the sites and the scope at each, and fixed prices follow, with a suggested sequence.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Do you check for asbestos before removing sealant?
On older buildings, our first request is the asbestos survey. The duty to manage asbestos sits with the dutyholder and removing it isn’t something we do.
How is commercial sealant work priced?
Photos, drawings or a schedule of the joints are usually enough to start through the quote form on this site. Where we need to see it, we’ll arrange a site visit, then send a fixed quote.
Is BN16 in your area?
Yes. BN16 is in our area and the rest of West Sussex, within our coverage of Greater London, South East England and Scotland. For a quote, call the office on 01277 525 020 or email a schedule or drawings.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Does commercial sealant work come with a guarantee?
It’s backed by our 12-month guarantee. Should anything we did fail within that period, let us know.