Expansion joint sealing in Rustington
Expansion and movement joint sealing in walls, decks and floors across Rustington, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Expansion joints filled with dirt and stones
- Layers of sealant in a movement joint
- Expansion joints split through the centre of the bead
Need expansion joint sealing in Rustington?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing for commercial buildings in Rustington
Mastic Doctor has sealed movement joints since 2005, for main contractors, FMs, managing agents and building owners. CHAS accredited, Constructionline member, CSCS-carded applicators and five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. The enquiries we see most involve previous reseals laid over old sealant and car park joints leaking onto vehicles below, on brickwork movement joints, cladding panel joints and car park decks and ramps. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Rustington is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Work in a smaller place like Rustington is typically one building at a time, so we gather photos and measurements first. Getting widths, depths and traffic details up front means one visit, not two.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Rustington (BN16, BN17)
- Region
- West Sussex
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Rustington: questions and answers
Is hospital work, at somewhere like Zachary Merton Hospital, something you do?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
Is Rustington Trading Estate, near Rustington, within your area?
Yes, sites like Rustington Trading Estate are within our area, along with the rest of Rustington. Send details of the unit and the work through our quote form for a quick quote.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
What do you charge?
We don’t publish prices, because every site is different. With photos or drawings, we can give you a fixed quote.
How do you choose the sealant?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Do you cover Rustington?
Yes. We take on work across Rustington, and the same phone number covers every area.
Quoting for work in Rustington
We price every job individually. The things that drive the figure:
- Access and working height
- Induction, permit and paperwork requirements
- The product specified
- How much existing material needs removing
Pricing movement joints depends on how many there are, their condition and the access, plus any specification you are working to. Call for a quote.
What to include in your enquiry
Good information means a firmer quote. Helpful details to send:
- Approximate linear metres or a joint schedule
- The postcode of the building
- Clear photographs of the problem areas
- Access details, including height
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or send photos by email.
What the job involves on each surface
Concrete and precast panel joints
Concrete edges can be weak or carry release agents that stop adhesion. We prepare the faces thoroughly and prime where the maker calls for it.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors.
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing, and we clear our waste as we work. Work in places the size of Rustington is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- We start with photos, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take, and flag anything that needs an engineer.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Getting the site ready
- Make sure the joints can be reached
- Tell us what induction or permit system the site runs
- Share the asbestos register for older buildings
Get a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Advice
Traffic, movement and joints around Rustington
With the shore within about 1 mile, Rustington counts as a coastal location. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so it pays to keep them sealed. Rustington lies roughly 51 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.
For an estate such as Zachary Merton Hospital (less than half a mile south-east of Rustington), the joints in ramps, decks and long building elevations all need attention over time. On industrial estates such as Rustington Trading Estate, 0.5 miles north of Rustington, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Rustington is about 5 miles west of Worthing, in West Sussex. We cover commercial sites throughout Rustington. We work across 373 places in West Sussex. For work in that direction, see our Brighton page (17 miles or so).
We take on movement joints across the BN16 and BN17 postcode area, for business premises of every kind. We cover commercial and managed buildings on Church Road, The Street and Station Road. You will find Rustington on or near the B2140. Just outside Rustington, we also work in Littlehampton (1 mile west), Toddington (1 mile north-west), Poling (2 miles north), Wick (2 miles west) and Lyminster (2 miles north-west). Bigger towns within reach include Worthing (5 miles east), Bognor Regis (8 miles west), Chichester (12 miles west), Selsey (13 miles south-west), Shoreham-by-Sea (11 miles east) and Lancing (8 miles east).
Landmarks near Rustington
We work on buildings around The Littlehampton Academy, Littlehampton College and Mewsbrook Park, among other places. The nearest railway station is Angmering station, about 0.9 miles east of the centre. Well-known places in the area include Zachary Merton Hospital (less than half a mile south-east) and Lyminster Siege Castle (3 miles north-west). For a walk, there’s WWT Arundel and Highdown Hill.
Common problems we fix in Rustington
Weathering wears down sealant on exposed elevations and decks. UV hardens the surface, and the sealant loses its ability to stretch, so it can’t follow the movement any more.
Any of the following is a good reason to get the joints checked over:
- Arrises breaking up along floor joints
- Brittle, chalky sealant on external joints
- Rain penetration at brick or block movement joints
- Previous reseals laid over old sealant
Schools such as Rustington Community Primary School have movement joints in their walls and floors that are easy to overlook.
What your quote should include
- Is the sealant right for the movement and the substrate?
- Their approach to joint depth and backing
- Do they follow the manufacturer’s priming guidance?
- Can the work be phased to keep areas open?
Also near Rustington
Also in Rustington
Leave it or put it right?
A like-for-like reseal of a joint that keeps splitting rarely lasts. A higher movement class, or a design change by the engineer, may be needed. Over time, UV, weather and movement wear any sealant out. Replacing it before it fails keeps water out.
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a quote when you are ready.
What you get with us
- Fully insured, including public liability cover
- Products installed to the manufacturer’s instructions
- CHAS accredited
- 12 months’ guarantee on every job
Take a look at our cost guide or how we’re accredited.
Maintenance after handover
For the best life from the joints:
- Include every elevation and deck joint in periodic inspections
- Keep traffic off new joints until the cure time is up
- Look over external and deck joints after a hard winter
- Keep stones and debris out of open joint lines
Fresh joint sealant needs its full cure time before it takes traffic or water. How long that takes depends on the product, the temperature and the depth of the joint and we’ll tell you when each bay or area can reopen. Keeping the area coned off until then avoids tyre marks and damage.
Floor joints with failed fillers break up quickly under wheels. Damaged edges make the floor rough and wear wheels faster and the broken length grows with every pass. Sealing early protects the edges.