Egham floor joint sealing
Floor joint sealing and filling in warehouses, factories and industrial units across Egham, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Trucks and loads jolting over damaged joints
- Filler that has parted from one face
- Failing joints at loading bays and dock doors
Need floor joint sealing in Egham?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our floor joint sealing in Egham
Before quoting, we look at what the floor is telling us: how wide the joints are, signs of ongoing movement, the wheel types crossing them and the state of the arrises. That tells us whether semi-rigid filler or flexible sealant suits each run and the answer can differ from one zone to the next. If you are dealing with a gap opening alongside old joint filler and a rough ride across broken joints, we can put it right, whatever the surface. A single leaking joint is often how a building in Egham first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Movement joints on schools, offices and shops in towns like Egham are easy to overlook until water gets in. A split or hardened joint lets rain into the wall, and it can no longer take up the movement.
A 12-month guarantee applies to all our work. Should something we installed fail, call 01277 525 020 or email a schedule or drawings and we will come back to it.
- Where
- Egham (TW20, TW18)
- Region
- Surrey
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
How the job changes by surface
Semi-rigid joint fillers
On industrial routes, a semi-rigid filler is often the right choice. We place them to depth and trim them level with the slab.
Saw-cut induced joints
Saw cuts are made soon after the slab is cast so shrinkage cracks follow a line. They start narrow and widen as the concrete dries so trafficked runs need a filler that holds the arrises.
Our process
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Most work in Egham is one building at a time: a school, a unit, an office or a block. Your photos, drawings or a site visit come first, followed by a fixed quote.
- First, the zones and order of work are agreed with you.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Before we start on site
- Warn occupants and staff about the work
- Point out any areas we must not close
- Make sure the joints can be reached
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or send details through our quote form.
Advice
Cost factors for floor joints
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Distance, for remote addresses
- How much existing material needs removing
- Induction, permit and paperwork requirements
- How accessible the joints are
A quote for floor joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
What we need to price the job
The more we know, the firmer the quote. When you get in touch, include:
- Whether the building will be occupied during the work
- Access details, including height
- The site address and postcode
- Approximate linear metres or a joint schedule
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or call 01277 525 020 or email the details over to discuss it first.
Aftercare for building managers
Regular inspection catches problems early. Specifically:
- Record damaged joints with a photo and a location
- Remind operators to lift rather than drag
- Respect the cure time before traffic returns
- Clear packed debris from open joints regularly
Problems inside the 12-month guarantee period are ours to put right. Beyond that, an inspection once or twice a year catches failing joints early.
While the concrete edges are intact, it’s a filling job. Once they have broken away, edge repair comes first and that takes longer and closes areas for longer.
Places near Egham
More services for Egham
Common problems we fix in Egham
Floor joints collect dust, oil, curing compound and cleaning residue. Without cutting back to sound, clean concrete, the new material simply lifts out.
Any of the following is a good reason to get the joints checked over:
- Dock area joints that have failed first
- Unfilled floor joints collecting dirt and grit
- Brittle joint filler breaking up
- Joint edges breaking up under truck wheels
Parks like The Green Business Centre, 0.8 miles north-east of Egham, combine paved areas, car parks and building elevations, each with joints that move.
Before you book anyone
- How the existing material will be dealt with
- How long is the guarantee, and what does it include?
- What site paperwork they can supply
- How the joint faces will be prepared and primed
When it isn’t the sealant
Honesty saves time and money. Fresh joints won’t solve:
- Slab panels that rock or move under load
- Cracks across panels caused by settlement or overload
- A failing floor coating, which is a flooring contractor’s job
Not sure which it is? You can speak to us on 01277 525 020 or send details through our quote form and we’ll tell you honestly before you book.
Surfaces we seal
- Saw-cut induced joints
- Construction joints
- Joints along racking aisles
- Loading bays
- Retail and showroom floors
- Forklift and pallet-truck routes
Floors, slabs and movement joints in Egham
Egham has at least three named business or industrial parks inside a 3-mile radius. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. Central London is about 20 miles from Egham. Warehousing clusters around the motorways that ring and radiate from London, and their floor joints take forklift and pallet-truck traffic all day.
A healthcare site such as Ashford Hospital, 3.5 miles to the east of Egham, depends on car parks, ramps and service yards whose joints take traffic all day. Schools such as Manorcroft Primary School have movement joints in their walls and floors that are easy to overlook.
Egham is about 6 miles south-east of Slough, in Surrey. We send applicators to Egham for floor joints, handled exactly as we handle every other area. Egham is one of 379 places in Surrey on our list for floor joints. For work in that direction, see our Reading page.
Business premises anywhere in TW20 and TW18 are within our area for floor joints. Buildings on Station Road, Church Road and High Street are within our area. Egham sits on or close to the A30 and A308. Close to Egham, our area also takes in Englefield Green (1 mile west), Hythe End (1 mile north), Egham Hythe (1 mile east), Stroude (1 mile south) and Thorpe (2 miles south-east). Bigger towns within reach include Guildford (13 miles south), Woking (8 miles south), Camberley (10 miles south-west), Epsom (14 miles south-east), Ewell (14 miles south-east) and Walton-on-Thames (7 miles south-east). Egham is one of the busier places in Surrey, and we take on floor joints for its commercial and public buildings.
What’s near Egham
In Egham, that means premises near Strode's College, The Railway Public House and The Magna Carta School and the streets around them. There’s a railway station in Egham itself: Egham station. Other landmarks nearby include Windsor Castle (4.5 miles north-west) and Spelthorne Museum (1.5 miles east). Green spaces nearby include St Ann's Hill and Manor Lake.
Questions we are asked in Egham
Is a hospital such as Ashford Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Will our site in Egham have to close for joint sealing?
Normally not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we will plan from there.
What information helps you price floor joint sealing?
Approximate metres of joint, photos of typical and worst areas, and a floor plan let us give a quick quote. We can visit where that helps, and you can call the office on 01277 525 020 or use the quote form to arrange it.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
How many days will you need on site?
That varies with the scale of the job, but the work usually takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. For bigger or phased jobs, we will set out a timescale with the quote.
What guarantee do you give on joint filling?
Every job has our 12-month guarantee. It applies to our workmanship rather than structural movement or accidental damage.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.