Industrial and floor joint sealing in Totford, Hampshire
Floor joint sealing and filling in warehouses, factories and industrial units in Totford and across Hampshire. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Trucks and loads jolting over damaged joints
- Failing joints at loading bays and dock doors
- Grimy joint lines spoiling a showroom floor
Floor joint sealing near Totford
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our floor joint sealing in Totford
Before quoting, we look at what the floor is telling us: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. That tells us whether semi-rigid filler or flexible sealant suits each run, area by area where it needs to be. Most enquiries involve joint edges breaking up under truck wheels and brittle joint filler breaking up, on retail and showroom floors, saw-cut induced joints and forklift and pallet-truck routes. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Totford is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a site near Totford, measurements and photos up front mean one trip where possible. Tell us the joint widths if you can, and what drives or walks over them.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Totford (SO24)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Why it’s worth doing now in Totford
An open joint is a modest filling job while its edges are sound. Left until they break, it needs an edge repair before any filling can start which means more downtime in that zone. Around Totford, it’s better to renew all the failing joints at once, rather than one at a time. Send photographs of each area and we will quote for the lot.
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote.
Why appoint us
- Specification-led, product-correct work
- Failed material removed, not covered up
- Fully insured, including public liability cover
- Constructionline member for supplier checks
See what affects the cost and our accreditations.
FAQs: Totford
Is a smaller place like Totford outside your area?
Not at all. Totford is within our area. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.
Do we have to stop operations in Totford while the joints are sealed?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we’ll plan from there.
Do you use semi-rigid filler or flexible sealant on floor joints?
It depends on the traffic and the movement. Forklift routes generally call for a semi-rigid filler that holds the arrises, while joints that move more take a flexible sealant.
Do you guarantee industrial floor joints?
Every job has our 12-month guarantee. It applies to our workmanship rather than structural movement or accidental damage.
Will we need to close the floor?
In most cases, just the area being treated is coned off. Each zone reopens when the product can take traffic and the next zone follows.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
For managing agents and facilities managers
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, so there’s one set of paperwork to deal with.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Places near Totford
Other services in Totford
What sets the cost
To price the job, we consider:
- Backing rod, priming and other preparation
- Working within restricted access windows
- Site requirements such as inductions and permits
- How much there is to seal
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
Sending details for a quote
A few photos plus some basic facts will normally do. Please tell us:
- Whether an asbestos survey exists
- The postcode of the building
- Access details, including height
- Approximate linear metres or a joint schedule
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Floors, slabs and movement joints in Totford
At about 53 miles from central London, Totford is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift. Rainfall across the South East, Totford included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in.
A joint near Totford that has lost its sealant lets in water and grit, and the edges suffer next; we’ll tell you if the edges need repairing first. For floors and slabs around Totford, the product is chosen for the traffic and the movement at each joint.
Totford is about 8 miles north-east of Winchester, in Hampshire. Businesses, contractors and managing agents in Totford use us for work on floor joints. 723 places across Hampshire fall within our area, including Totford. Sites around Southampton have their own page, about 18 miles away.
Work on floor joints is covered throughout SO24, for business premises of every kind. Close to Totford, our area also takes in Northington (1 mile south-west), Brown Candover (1 mile north-east), Old Alresford (3 miles south-east), Preston Candover (3 miles north-east) and Bighton (3 miles south-east). Nearby towns on our patch include Basingstoke (10 miles north), Winchester (8 miles south-west), Eastleigh (14 miles south-west), Andover (14 miles west), Chandler's Ford (14 miles south-west) and Alton (9 miles east).
Around Totford
Recent enquiries here include premises near The Woolpack Inn. For rail, the closest station is Micheldever station, roughly 4.5 miles north-west of the centre. Other landmarks nearby include Barton Castle (3 miles east).
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. Smaller jobs around Totford can be grouped with others nearby. You will have a fixed quote before work starts.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- We vacuum each run and prime it if the chosen product requires a primer.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Tell us which areas need to stay in use
- Flag any permit to work we’ll need
- Warn occupants and staff about the work
Get a fixed quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Related advice
Surface by surface
Construction joints
Construction joints, sometimes called day joints, mark where one pour ended and the next began. They often see more movement than sawn joints and that shapes the choice of filler or sealant.
Isolation joints at walls and columns
Isolation joints separate the slab from walls, columns and plinths so it can move independently. A flexible product suits them better than a stiff filler.