Industrial and floor joint sealing in Preston Candover, Hampshire
Floor joint sealing and filling in warehouses, factories and industrial units in Preston Candover and across Hampshire. CHAS accredited and fully insured, with a 12-month guarantee.
- Scruffy, dirty joint lines on a shop or showroom floor
- Old filler gone hard, cracked or loose
- Chipped and spalling edges along forklift routes
Floor joint sealing in Preston Candover
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Work for main contractors and building owners
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Preston Candover. Several sites can go on one quote, so there’s one set of paperwork to deal with.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
About our floor joint sealing in Preston Candover
Mastic Doctor has worked on joints in commercial buildings for over 20 years. Our CSCS-carded applicators follow your site induction and rules, and the business is CHAS accredited and a Constructionline member holding public liability insurance. Completed joints come with a 12-month guarantee on our workmanship. If you have broken arrises where pallet trucks cross and drivers complaining about joints on a route, we can put it right, on loading bays, forklift and pallet-truck routes and saw-cut induced joints alike. Searching for sealant specialists in Preston Candover? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
In and around smaller places like Preston Candover, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Place
- Preston Candover (RG25)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Places near Preston Candover
More services for Preston Candover
Common questions from Preston Candover clients
Is Preston Candover too far out for you?
No. Small places get the same service as large ones. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Does a site in Preston Candover have to shut while its joints are sealed?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
How long will the new sealant last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
How long before trucks can use the joints?
Cure times vary with the product and the conditions. You will get a reopening time for each area before we start.
Why is there a gap next to the joint filler?
Separation normally comes from slab shrinkage, poor preparation or the wrong product. We look at which it is before recommending anything.
How many days will you need on site?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
How the job changes by surface
Construction joints
Construction joints, sometimes called day joints, mark where one pour ended and the next began. They can move more than saw cuts, and that shapes the product choice.
Forklift and pallet-truck routes
Main aisles and cross routes carry the most wheel movements and the joints on them break down first. A semi-rigid filler is common here because it supports the arrises under hard wheels.
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Rural sites near Preston Candover may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- We look at joint widths, edge condition and the traffic on each route.
- A fixed quote follows, listing the treatment for each area and the order of work.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- The area is handed back once it has cured enough to take traffic.
Getting the site ready
- Warn occupants and staff about the work
- Tell us your opening times and when work is allowed
- Agree which areas must stay open
Ask for a quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, give us a call on 01277 525 020 or email the details over.
Advice
Honest limits
We check first that sealant really is the fix. It won’t put right:
- Slab panels that rock or move under load
- Structural cracking in the slab
- Worn screed or surface finishes
Not sure which it is? You can give us a call on 01277 525 020 or send photos by email and we’ll tell you honestly.
Joints and surfaces we work on
- Construction joints
- Retail and showroom floors
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Joints along racking aisles
- Loading bays
Keeping the joints sound
After handover, these steps help:
- Make joint checks part of your floor inspections
- Keep photographs of joints that look like they’re failing
- Allow for topping up joints as a new slab settles
- Mention any aggressive cleaning regime at quote stage
We will give you a time before trucks can run over the new joints and it pays to stick to it. Cones or barriers stop the first driver cutting the corner.
Joints are easiest to look after when someone checks them regularly. A phased plan, worst routes first, spreads the work out and keeps on top of the rest.
Where floor joints take the most wear near Preston Candover
Preston Candover sits in one of the drier corners of the country, the South East. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints. At about 50 miles from central London, Preston Candover is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital; their floors carry heavy traffic every shift.
If you manage units on an estate such as Barton Industrial Estate (2.6 miles south-east of Preston Candover), the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Preston Candover is about 7 miles south of Basingstoke, in Hampshire. We send applicators to Preston Candover for floor joints. Preston Candover is one of 723 places we cover in Hampshire for floor joints. For work in that direction, see our Reading page, about 20 miles away.
Business premises anywhere in RG25 are within our area for floor joints. If your site is on Stenbury Drive, Farriers Close and Garden Close or close by, we can quote for floor joints. If your building is just outside Preston Candover, we cover Upper Wield (2 miles south-east), Brown Candover (2 miles south-west), Totford (3 miles south-west), Northington (4 miles south-west) and Bighton (5 miles south). A short drive away, we cover Basingstoke (7 miles north), Winchester (11 miles south-west), Fleet (15 miles north-east), Andover (15 miles west), Alton (7 miles east) and Petersfield (14 miles south-east).
Landmarks near Preston Candover
Locally, jobs take us to sites close to The Purefoy Arms Public House. A little further out are Barton Castle (2.4 miles south). For a walk, there’s Farleigh Hill.
When to call us in Preston Candover
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Crossing an open joint, the wheel drops and knocks the opposite arris and those knocks chip the edge apart bit by bit.
If one of these sounds familiar, it’s time for a closer look:
- Broken arrises where pallet trucks cross
- Old filler gone hard, cracked or loose
- Scruffy, dirty joint lines on a shop or showroom floor
- Loading bay joints breaking down
Schools like Preston Candover Church of England Primary School often have long brick elevations with movement joints that age quietly.
Questions to ask before you book
- Who will actually carry out the work
- Whether old or failed sealant will be cut out, not overlaid
- Their public liability cover
- The terms of the workmanship guarantee