Floor Joint Sealing contractors in Sturry
Floor joint sealing and filling in warehouses, factories and industrial units in Sturry and across Kent. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Filler that has parted from one face
- Brittle joint filler breaking up
- Drivers complaining about joints on a route
Floor joint sealing for businesses in Sturry
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Sturry, done properly
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Pricing depends on the length of joint, how worn the edges are and when we can get in, and the quote is fixed before we mobilise. If you’re dealing with failing joints at loading bays and dock doors and brittle joint filler breaking up, we can help, on retail and showroom floors, construction joints and saw-cut induced joints alike. For commercial sealant work in Sturry, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
In a smaller place such as Sturry, floor and movement joints are often in agricultural and rural business units, schools and the odd small industrial yard. Their slabs and walls still need movement joints that work.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Sturry (CT2)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Slabs, ramps and loading bays in Sturry
The South East is one of the drier parts of the UK. External joints still wait for dry conditions, while winter salting gets into any joint left open. Less than 3 miles from Sturry there are at least three named estates and business parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
For a store at a site such as Buddy's Retail Park, which lies north-west of Sturry, the service yard and goods-in area are where joints break down first. In a school such as Sturry Church of England Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Phasing is what makes joint work possible on busy sites such as Canterbury Retail Park (1.1 miles south-west of Sturry): one bay, aisle or car park row at a time.
Sturry is about 3 miles north-east of Canterbury, in Kent. Looking for floor joint sealing in Sturry? We can help. 931 places across Kent fall within our area, Sturry among them. We also cover London, around 54 miles from Sturry.
Commercial sites across CT2 are covered. Among the streets we cover are High Street, Park View and Link Road. If your building is just outside Sturry, we cover Broad Oak (1 mile west), Westbere (1 mile east), Calcott (1 mile north), Hersden (2 miles east) and Hicks Forstal (2 miles north). Nearby towns on our patch include Canterbury (3 miles south-west), Margate (12 miles north-east), Dover (14 miles south-east), Folkestone (15 miles south), Ramsgate (13 miles east) and Broadstairs (14 miles east).
Around Sturry
Locally, jobs take us to sites close to Frank Montgomery School, Chequer's Wood and Old Park and The Swan Inn, among other places. Sturry has its own railway station: Sturry station. Other landmarks nearby include Canterbury Roman Museum (2.6 miles south-west) and St Martins Hospital (2.1 miles south). Open spaces near Sturry include West Blean and Thornden Woods.
FAQs: Sturry
Does your area include sites such as Buddy's Retail Park, near Sturry?
Yes. We cover Sturry and the area around it, including industrial estates, business parks and retail parks such as Buddy's Retail Park. Photos and a short description are enough for a first look.
Do you take on work at healthcare sites like Saint Martin's Hospital?
Yes, hospitals are one of the sectors we cover. Work is phased so departments keep running, under the site’s own rules.
Is it normal for joint filler to separate?
It can be shrinkage, contamination on the joint faces or a product unsuited to the movement. We diagnose the cause before suggesting a fix.
Can weather delay the job?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
How many days will you need on site?
That varies with the scale of the job, though a typical visit usually takes anything from a day for one loading bay to several days for a large floor, split into phases. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
How the quote is worked out
A fixed quote reflects the actual work. It allows for:
- The size and state of each joint
- Which sealant the job calls for
- Access and working height
- Quantities, in metres or numbers
A quote for floor joints depends on quantities, condition and access, plus any specification you are working to. Ask us for a fixed quote.
Sending details for a quote
A good diagnosis starts with the right details. Let us know:
- The postcode of the building
- Approximate linear metres or a joint schedule
- Any specification or named product
- When you need the work done
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
What the job involves on each surface
Flexible floor sealants
A flexible sealant suits perimeter and movement joints away from the heaviest traffic. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Loading bays and dock areas
Joints at dock doors need a product that copes with the traffic and the conditions. Phasing is planned around your delivery schedule.
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- A failing floor coating, which is a flooring contractor’s job
- Broken concrete either side of the joint
- Unstable slabs moving under traffic
If in doubt, give us a call on 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
Joints and surfaces we work on
- Joints along racking aisles
- Loading bays
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Construction joints
- Retail and showroom floors
Why act early in Sturry
Open joints are where dirt collects where scrubber-driers can’t get it out. Where the floor is on show or needs to be kept clean, that is a problem. Flush, filled joints leave nothing for cleaners to dig out. Sealant hardens, cracks and loses grip with age, UV and movement. Replacing it before it fails keeps water out.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Why us?
- CHAS accredited contractor
- CSCS-carded applicators
- Specification-led, product-correct work
- Fully insured
Take a look at what affects the cost or our accreditations and insurance.
Places near Sturry
More services for Sturry
Doing it in-house
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For a job in Sturry, the main thing is a clear picture of the work. You will then get a fixed price for the work.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
What we need from you
- Tell us your opening times and when work is allowed
- Send any specification or drawings in advance
- Let us know about inductions and permits
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or call the office on 01277 525 020 or email a schedule or drawings to discuss it first.