Industrial and floor joint sealing in Hicks Forstal, Kent
Floor joint sealing and filling in warehouses, factories and industrial units throughout Hicks Forstal and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Unfilled floor joints collecting dirt and grit
- Filler that has parted from one face
- Broken arrises where pallet trucks cross
Floor joint sealing across Hicks Forstal
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing in Hicks Forstal
Before quoting, we look at what the floor is telling us: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. That tells us whether semi-rigid filler or flexible sealant suits each run, area by area where it needs to be. We work on saw-cut induced joints, forklift and pallet-truck routes and loading bays, and the failures we’re asked to look at most are a rough ride across broken joints and open saw cuts full of debris. A single leaking joint is often how a building in Hicks Forstal first comes to us: we look at the rest while we are there and tell you what we find.
Smaller community and commercial buildings around Hicks Forstal have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Place
- Hicks Forstal (CT3)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Keeping the joints sound
Cleaning and maintenance staff play a part too. Share these points with them:
- Photograph any joint that starts to chip
- Let us know what the floor is cleaned with
- Respect the cure time before traffic returns
- Clear packed debris from open joints regularly
Dragged forks and pallets gouge joints and edges alike. Steel tines will mark a good joint over time if it keeps happening.
A broken joint on a main route is crossed by every truck on that route. Early treatment protects wheels, loads and drivers as much as the floor.
Why it’s worth doing now in Hicks Forstal
Tape, or whatever sealant is in the stores cupboard, may look like a fix for a while. None of it is designed for wheel loads, and it usually ends up dragged across the floor. A product chosen for the traffic and movement does the job once. Converted and older buildings near places like Hicks Forstal tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
We don’t publish prices, since every building and every scope is different. Call for a quote.
Why clients in Hicks Forstal choose us
- Public liability insurance in place
- Commercial sealant work since 2005
- Products installed to the manufacturer’s instructions
- Fixed quotes based on photos, drawings or a visit
Read what affects the cost or our accreditations and insurance.
What the job involves on each surface
Construction joints
Construction joints, sometimes called day joints, mark where one pour ended and the next began. They can move more than saw cuts, and that shapes the product choice.
Forklift and pallet-truck routes
Truck routes take traffic all day and the joints on them break down first. A semi-rigid filler is common here because it supports the arrises under hard wheels.
Places near Hicks Forstal
Other services in Hicks Forstal
When it isn’t the sealant
Some faults sit outside our scope, and we say so rather than covering them up:
- Level or flatness problems across the floor
- Broken concrete either side of the joint
- Damaged or worn floor coatings and screeds
If you are not sure, just give us a call on 01277 525 020 or use the quote form and we’ll give you a straight answer.
What we seal
- Retail and showroom floors
- Construction joints
- Saw-cut induced joints
- Loading bays
- Forklift and pallet-truck routes
- Joints along racking aisles
Where floor joints take the most wear near Hicks Forstal
Hicks Forstal lies within about 3 miles of the sea. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so a failed joint lets more in and the edges break up sooner. Hicks Forstal sits in one of the drier corners of the country, the South East. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints.
Hospital campuses such as Queen Victoria Memorial Hospital (to the north of Hicks Forstal) grow in stages, leaving movement joints wherever new blocks meet old. Campuses like University of Kent (3.8 miles south-west of Hicks Forstal) mix old and new buildings, with movement joints wherever they meet. In a school such as Spires Academy, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Hicks Forstal is about 2 miles south of Herne Bay, in Kent. We send applicators to Hicks Forstal for floor joints. We work across 931 places in Kent. Our London page has more on work in that area.
We take on floor joints across the CT3 postcode area, whatever the building. Close to Hicks Forstal, our area also takes in Calcott (1 mile south-west), Herne Common (1 mile north), Knave's Ash (1 mile east), Herne (1 mile north) and Bullockstone (1 mile north-west). Bigger towns within reach include Canterbury (4 miles south-west), Margate (12 miles east), Dover (15 miles south-east), Ramsgate (12 miles east), Broadstairs (13 miles east) and Whitstable (4 miles west).
Landmarks near Hicks Forstal
Locally, jobs take us to sites close to Curtis Wood. Hicks Forstal’s nearest station is Sturry station, roughly 2.2 miles south. A little further out are St Martins Hospital (3.9 miles south) and Canterbury Castle (4.6 miles south-west). For a walk, there’s West Blean and Thornden Woods.
Quoting for work in Hicks Forstal
These are the things that shape the price:
- Removal of failed or old sealant
- Specialist products, such as fire-rated or hygienic sealants
- Access and working height
- Whether the work must be split into stages
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Details that help us quote
Good information means a firmer quote. Helpful details to send:
- Anything awkward about access or site hours
- A wide shot and a close-up of the area
- The site address and postcode
- Specification clauses that apply
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
How a job runs
Occupied buildings need a little choreography. We sign and contain the area we are in, keep walkways clear and move on in phases so staff and visitors can carry on around us. Smaller jobs around Hicks Forstal can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- A fixed quote follows, listing the treatment for each area and the order of work.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- Each phase reopens when the product is ready for wheels, then we start the next.
Getting the site ready
- Have the specification and drawings to hand
- Agree which areas must stay open
- Point out parking and an unloading spot
Quotes
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, phone 01277 525 020 or email the details over.
Related advice
Your questions answered
Does your area include sites such as Buddy's Retail Park, near Hicks Forstal?
Yes, sites like Buddy's Retail Park are within our area, along with the rest of Hicks Forstal. Photos and a short description are enough for a first look.
Is a hospital such as Queen Victoria Memorial Hospital somewhere you can work?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long does a job like this take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
What do you need from us to quote?
Use our quote form, or email photos and a plan, with the traffic on each area. A fixed quote follows with the product and phasing set out.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
How soon can traffic go back on the floor?
Cure times vary with the product and how cold the slab is. You will get a reopening time for each area before we start.
Can the sealant be colour-matched?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.