Smoo floor joint sealing
Planning work on a floor joint in Smoo? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Filler that has parted from one face
- Chipped and spalling edges along forklift routes
- Loading bay joints breaking down
Floor joint sealing across Smoo
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our floor joint sealing in Smoo
Concrete floors in warehouses and factories are cut into bays with saw cuts and day joints, and every one of those joints is an exposed edge under hard wheels. Our job is to put the right filler or sealant into them for the loads and the movement they see, so the arrises are supported and grit stays out. We work on saw-cut induced joints, retail and showroom floors and joints along racking aisles, and the usual reasons a site gets in touch are open saw cuts full of debris and chipped and spalling edges along forklift routes. Looking for mastic applicators who cover Smoo? We have been sealing commercial buildings since 2005.
In smaller places such as Smoo, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Slabs and yards take vehicles, rain and frost.
We stand by our work: 12 months, guaranteed. That covers our preparation and application.
- Location
- Smoo (IV27)
- Region
- Highland
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Leave it or put it right?
Broken joints shake trucks, stock and operators alike. Wheels and bearings wear faster and loads can shift, which nobody budgets for. A filled joint takes most of that out. Around smaller places like Smoo, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote.
Why choose Mastic Doctor in Smoo
- A Constructionline member, so easy to vet
- Work carried out by CSCS-carded applicators
- Old sealant cut out, never sealed over
- 12-month guarantee on workmanship
Take a look at what affects the cost and our accreditations.
Slabs, ramps and loading bays in Smoo
Smoo is within about 1 mile of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. Being in the west of Scotland, Smoo gets more rain than eastern areas. Open joints in external slabs take a lot of water. Dry spells are used for the external joints.
Around Smoo, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Smoo is in Highland. Across the IV27 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Smoo is one of 256 places in Highland on our list.
Commercial sites across IV27 are covered for floor joints. We also cover Diuranais (1 mile north-west), Melness (11 miles east), Tongue (13 miles south-east), Kinlochbervie (13 miles south-west) and Scourie (21 miles south-west) for floor joints. Where a site is remote or on an island, travel and materials need planning ahead, so the full address helps from the start.
Near you in Smoo
Green spaces nearby include Loch na Cathrach Duibhe.
Maintenance after handover
Problems stay small when the joints are checked regularly. Specifically:
- Remind operators to lift rather than drag
- Tell us about strong cleaning chemicals before we quote
- Sweep debris out of open joints until they can be filled
- Start with the dock areas, where joints fail soonest
If a joint we filled starts to break up within 12 months, tell us and we will arrange a look. After that, a check before your busiest period keeps small repairs small.
While the concrete edges are intact, it’s a filling job. After the edges go, repairs come into it and that takes longer and closes areas for longer.
Signs you need floor joint sealing in Smoo
Left open, joints fill with grit, wrap and wood fragments. That debris is hard and levers at the edges as wheels pass, speeding up the damage.
Typical triggers for a call:
- Filler that has parted from one face
- Flexible sealant torn out by wheels
- Chipped and spalling edges along forklift routes
- Dock area joints that have failed first
A joint near Smoo that has lost its sealant lets in water and grit, and the edges suffer next.
Before you book anyone
- Are they CHAS accredited or on Constructionline?
- The named product and why it was chosen
- What level of public liability insurance do they hold?
- Will CSCS-carded applicators be on site?
Diagnose, treat, sign off
Working in a building that stays open takes some planning. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use. Tell us who will meet us and how to get in at your building near Smoo. We will confirm the plan with the fixed quote.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- A fixed quote follows, listing the treatment for each area and the order of work.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- We vacuum each run and prime it if the chosen product requires a primer.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Warn occupants and staff about the work
- Tell us what induction or permit system the site runs
- Make sure the joints can be reached
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to speak to us on 01277 525 020 or send photos by email.
Related advice
Common questions from Smoo clients
Is a smaller place like Smoo outside your area?
No. Small places get the same service as large ones. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Do we have to stop operations in Smoo while the joints are sealed?
Usually not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we will plan from there.
Does weather matter for sealant work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
What site paperwork can you supply?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
Why is there a gap next to the joint filler?
Young concrete carries on shrinking for a long time, so a semi-rigid filler can part from one face. A top-up normally puts it right.
Which sealant will you use?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
How long does a job like this take?
It depends on the scope, but the work usually takes a day for smaller units, with bigger warehouse floors programmed over several visits. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Places near Smoo
What else we do in Smoo
Cost factors for floor joints
What shapes the price:
- The total length or number of joints
- How much existing material needs removing
- Specialist products, such as fire-rated or hygienic sealants
- Induction, permit and paperwork requirements
There’s no price list, because the scope varies so much from one building to the next. Call for a quote.
What we need to price the job
Good information means a firmer quote. Helpful details to send:
- What the building is and how it’s used
- Anything awkward about access or site hours
- Whether an asbestos survey exists
- The product your specification calls for
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.