Industrial and floor joint sealing in Shripney, West Sussex
Floor joint sealing in Shripney, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Soft sealant dragged out of trafficked joints
- Scruffy, dirty joint lines on a shop or showroom floor
- A rough ride across broken joints
Floor joint sealing across Shripney
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Cost factors for floor joints
Your fixed quote is built from the real scope. It allows for:
- Phasing around occupants
- Quantities, in metres or numbers
- Joint width, depth and condition
- How much existing material needs removing
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What we need to price the job
A few photos plus some basic facts will normally do. It helps to include:
- A wide shot and a close-up of the area
- Approximate linear metres or a joint schedule
- How the joints are reached, and at what height
- Asbestos survey details if the building is older
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to phone 01277 525 020 or use the quote form.
About our floor joint sealing in Shripney
Concrete floors in warehouses and factories are cut into bays by saw-cut joints and construction joints, and each joint line is a weak edge that wheels run over all day. We fill or seal them with a product matched to the traffic and the movement, so the arrises are supported and grit stays out. If you have a gap opening alongside old joint filler and sealant pulled out along a truck route, we can help, on forklift and pallet-truck routes, loading bays and joints along racking aisles alike. For commercial sealant work in Shripney, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Smaller community and commercial buildings around Shripney have their own movement joints in walls and floors. They’re easily forgotten until water gets in or an edge breaks.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Shripney (PO22)
- Region
- West Sussex
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Loading bays and dock areas
We usually work through dock areas a few bays at a time so goods in and out carry on. Tell us your site hours and access windows and we’ll plan around them.
Semi-rigid joint fillers
For trafficked warehouse joints, semi-rigid fillers are common. They are installed to the depth the manufacturer specifies and finished flush.
Building owners, agents and FMs in Shripney
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Shripney. One quote can cover more than one site, which keeps the paperwork simple.
What happens if it’s left?
Duct tape or a general builders’ sealant can seem to buy some time. None of it is designed for wheel loads, and it typically ends up dragged across the floor. A product chosen for the traffic and movement does the job once. Around Shripney, it’s better to renew all the failing joints at once. Send photographs of each area and we’ll quote for the lot.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote.
Why choose Mastic Doctor in Shripney
- Commercial sealant work since 2005
- Workmanship guaranteed for 12 months
- Fully insured
- One contact handling all your sites
Read what affects the cost and how we’re accredited.
On site: what to expect
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. For a building around Shripney, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- We look at joint widths, edge condition and the traffic on each route.
- A fixed quote follows, listing the treatment for each area and the order of work.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- The area is handed back once it has cured enough to take traffic.
Preparing the site
- Point out any areas we must not close
- Explain the parking and delivery arrangements
- Send your site hours and access windows
Getting a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Related advice
Looking after the joints
A few simple habits keep the new joints working:
- Mention any aggressive cleaning regime at quote stage
- Ask drivers not to drag forks or pallets
- Plan for a top-up on newer floors
- Hold traffic back until the product has cured
A routine walk of the busiest aisles shows how the joints are holding up. Watch for filler pulling away from an edge, fresh chipping or grit collecting, and photograph anything that changes.
Regular inspection catches failing fills before the edges go. We can quote a programme that starts with the busiest areas and keeps on top of the rest.
Floor joint sealing in Shripney: the local picture
The sea is no more than about 3 miles from Shripney. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so it pays to keep them sealed. The 3 miles around Shripney take in at least three named trading estates, business parks or retail parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Hospital campuses such as Bognor Regis War Memorial Hospital (1.3 miles south of Shripney) grow in stages, leaving movement joints wherever new blocks meet old. University campuses such as University of Chichester (Bognor Campus) (1.6 miles south of Shripney) have car parks, paved walkways and building elevations with movement joints. Retail centres such as Arun Retail Park, 0.9 miles to the south of Shripney, have floors, service yards and car parks with joints under constant traffic.
Shripney is about 2 miles north-east of Bognor Regis, in West Sussex. We cover Shripney, with the same fixed quotes and 12-month guarantee as everywhere else. Shripney is one of 373 places we cover in West Sussex. There’s a separate page for Portsmouth, about 18 miles away.
We cover the PO22 postcode districts. Buildings on Shripney Lane, Shripney Road and The Marigolds are within our area. Nearby places we also cover include Lidsey (1 mile north-east), Flansham (2 miles east), Westergate (2 miles north), Aldingbourne (2 miles north) and Eastergate (2 miles north) for floor joints. Nearby towns on our patch include Worthing (12 miles east), Chichester (5 miles north-west), Selsey (7 miles south-west), Littlehampton (6 miles east), Lancing (15 miles east) and Rustington (7 miles east).
Around Shripney
Around Shripney, our work takes us to commercial buildings near The Brooks Local Nature Reserve, The Regis School and Felpham Community College and the streets around them. Shripney’s nearest station is Bognor Regis station, about 1.7 miles south. Well-known places in the area include Tote Copse Castle (1.8 miles north-west) and Bognor Regis Museum (2.1 miles south).
Places near Shripney
Other services in Shripney
Common questions from Shripney clients
Does the sea air around Shripney change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Is Saltbox Business Park., near Shripney, within your area?
Yes. Estates, retail parks and business parks around Shripney, Saltbox Business Park. Among them, are all within reach. A few photos and the unit address let us price the work.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Is it normal for joint filler to separate?
On newer slabs, the concrete keeps shrinking after the joints are filled and a stiff filler can separate down one side. A top-up normally puts it right.
Are you CHAS accredited?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.