The Mastic Doctor team standing beside their branded vans outside an office building
West Sussex · England

Industrial and floor joint sealing in Aldingbourne, West Sussex

Sealant work in Aldingbourne for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.

  • Cracked and crumbling joint fill
  • Sealant pulled out along a truck route
  • Loading bay joints breaking down
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
London, the South East & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Floor joint sealing near Aldingbourne

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

About our floor joint sealing in Aldingbourne

Mastic Doctor has worked on joints in commercial buildings for over 20 years. Our CSCS-carded applicators follow your site induction and rules, and we are CHAS accredited and a Constructionline member, with public liability insurance in place. Finished floor joints in Aldingbourne carry our 12-month guarantee. If you’re dealing with broken arrises where pallet trucks cross and drivers complaining about joints on a route, we can help, whatever the surface. A specialist sealant contractor works differently from a general builder: in Aldingbourne, that means joint design, primers and backing rod as standard.

Jobs around smaller places like Aldingbourne are planned so the whole job is done in one visit, with the right materials on hand. Note joint widths and the traffic that uses them, and we will take it from there.

Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
Aldingbourne (PO20)
Wider area
West Sussex
Guarantee
12 months on our workmanship
Price
Fixed quote, scope in writing
Phone
01277 525 020
Updated
3 November 2026

Cost factors for floor joints

There’s no standard rate for sealant work, since sites vary so much. What we take into account:

  • Induction, permit and paperwork requirements
  • The product specified
  • Any access equipment needed
  • Distance, for remote addresses

No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.

What we need to price the job

A few photos plus some basic facts will normally do. Please tell us:

  • How the joints are reached, and at what height
  • Asbestos survey details if the building is older
  • Your programme or deadline
  • Drawings or a marked-up plan, if available

To get a fixed quote, call the office on 01277 525 020 or send details through our quote form with the site address and an outline of the work. Our quote form is another easy route.

How a job runs

Working in a building that stays open takes some planning. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use. If others near Aldingbourne need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.

  1. First, the zones and order of work are agreed with you.
  2. We point out joints whose edges need repairing first.
  3. We clear each run back to clean concrete.
  4. We fill the joints with the agreed product, finished level.
  5. Each area is handed back when ready for traffic.

Getting the site ready

  • Send asbestos survey details if the building is pre-2000
  • Share your working hours and any access restrictions
  • Explain the parking and delivery arrangements

Getting a fixed quote

Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or email drawings and photos.

Get a quick quote

Read more

Looking after the joints

Keep the joints in good shape with a few simple steps:

  • Put loading bays at the top of the list
  • Keep photographs of joints that look like they’re failing
  • Clear packed debris from open joints regularly
  • Ask drivers not to drag forks or pallets

Once cured, the joints get cleaned along with the slab. Tell us about aggressive cleaning products or hot washing at quote stage so the product suits them.

Every vehicle on a busy aisle hits a damaged joint. Early treatment protects wheels, loads and drivers as much as the floor.

For managing agents and facilities managers

Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.

CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.

Traffic, movement and joints around Aldingbourne

Central London is about 52 miles from Aldingbourne. The South East has large numbers of industrial estates and warehouses along the motorway corridors. Aldingbourne has at least three named business or industrial parks inside a 3-mile radius. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.

For a centre such as Arun Retail Park (3 miles south of Aldingbourne), the service yard and car park joints normally need attention first. Parks like The Woodhorn Business Centre, 0.9 miles to the south-west of Aldingbourne, combine paved areas, car parks and building elevations, each with joints that move. Hospital campuses such as Bognor Regis War Memorial Hospital (3.3 miles south of Aldingbourne) grow in stages, leaving movement joints wherever new blocks meet old.

Aldingbourne is about 3 miles north of Bognor Regis, in West Sussex. Looking for floor joint sealing in Aldingbourne? We can help. 373 places across West Sussex fall within our area, Aldingbourne among them. For work in that direction, see our Portsmouth page, about 17 miles away.

We take on floor joints across the PO20 postcode area, for business premises of every kind. Streets here include Hook Lane and Park Lane, and sites on any of them can send details for a fixed quote. Close to Aldingbourne, our area also takes in Nyton (1 mile east), Norton (1 mile north), Westergate (1 mile east), East Hampnett (1 mile north-west) and Crockerhill (1 mile north). Further afield, our area takes in Worthing (13 miles east), Bognor Regis (3 miles south), Chichester (4 miles west), Selsey (9 miles south-west), Littlehampton (7 miles east) and Rustington (8 miles east).

Around Aldingbourne

Locally, jobs take us to sites close to Ormiston Six Villages Academy and the streets around them. Aldingbourne’s nearest station is Barnham station, about 2.1 miles east of the centre. Well-known places in the area include The Chichester City Museum (3.9 miles west) and Bognor Regis War Memorial Hospital (3.3 miles south).

Map of Aldingbourne © OpenStreetMap contributors

Aldingbourne: questions and answers

Can you take on a job at a hospital such as Bognor Regis War Memorial Hospital?

Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.

Can you work at a site such as The Woodhorn Business Centre, by Aldingbourne?

Yes, sites like The Woodhorn Business Centre are within our area, along with the rest of Aldingbourne. A few photos and the unit address let us price the work.

Can you follow the specification on our project?

Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.

Is colour matching possible?

That depends on the product. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.

Why has the filler pulled away from one side?

It can be shrinkage, contamination on the joint faces or a product unsuited to the movement. We diagnose the cause before suggesting a fix.

Do you seal on top of existing sealant?

No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.

Are you fully insured?

Yes. We’re fully insured, and the certificate can go with your quote.

Different surfaces, different methods

Retail and showroom floors

In retail, joints take trolleys, castors and cleaning machines rather than forklifts. The product is chosen for that traffic and the appearance is part of the brief.

Flexible floor sealants

Polyurethane sealants suit floor joints with larger movement. They give less edge support than semi-rigid fillers so they are used where movement matters more than wheel load.

Site staff or a sealant specialist?

Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.

Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.

Accreditations

Trusted. Accredited. Insured.