Floor Joint Sealing contractors in Lidsey
Need floor joint sealing in Lidsey? It’s simple: send details, get a quote, we seal, guaranteed.
- Untidy open joints in a retail unit
- A rough ride across broken joints
- Unfilled floor joints collecting dirt and grit
Floor joint sealing in Lidsey
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Different surfaces, different methods
Construction joints
Day joints sit where one section of slab was cast against another. They often see more movement than sawn joints, and that shapes the product choice.
Saw-cut induced joints
Most of the joints in a warehouse floor are saw cuts. We clear them back to clean concrete and fill them to the depth the product calls for, finishing flush with the slab.
Floor joint sealing for commercial buildings in Lidsey
Concrete floors in warehouses and factories are cut into bays by saw-cut joints and construction joints, and every one of those joints is an exposed edge under hard wheels. We fill or seal them with a product matched to the traffic and the movement so the edges are held up and debris can’t pack in. If you have soft sealant dragged out of trafficked joints and trucks and loads jolting over damaged joints, we can put it right. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Lidsey is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller places such as Lidsey, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Work we carry out in West Sussex comes with a 12-month guarantee. If an installation problem shows up, ring 01277 525 020 or email the details over and we’ll arrange a return visit.
- Where
- Lidsey (PO22)
- Region
- West Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Slabs, ramps and loading bays in Lidsey
Lidsey sits close to the coast, within about 3 miles. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. The 3 miles around Lidsey take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Hospital campuses such as Bognor Regis War Memorial Hospital, 1.9 miles south of Lidsey, grow in stages, leaving movement joints wherever new blocks meet old. Schools like Aldingbourne Primary School often have long brick elevations with movement joints that age quietly. A campus such as University of Chichester (Bognor Campus) (2.1 miles south of Lidsey) has long runs of movement joint in its buildings, decks and paving.
Lidsey is about 2 miles north-east of Bognor Regis, in West Sussex. If you are looking for floor joint sealing in Lidsey, we can help, as we do across West Sussex. Lidsey is one of 373 places we cover in West Sussex. Our Portsmouth page has more on work in that area (18 miles or so).
Business premises anywhere in PO22 are within our area for floor joints. If your site is on Lidsey Road and Sack Lane or close by, send details and we’ll quote for floor joints. We also cover Shripney (1 mile south-west), Westergate (1 mile north), Eastergate (1 mile north), West Barnham (1 mile north-east) and Barnham (1 mile north-east). Bigger towns within reach include Worthing (12 miles east), Chichester (5 miles west), Selsey (8 miles south-west), Littlehampton (6 miles east), Lancing (15 miles east) and Rustington (7 miles east).
Local landmarks in Lidsey
Locally, jobs take us to sites close to St Philip Howard Catholic High School and The Brooks Local Nature Reserve and the streets around them. The nearest railway station is Barnham station, roughly 1.3 miles north-east. Other landmarks nearby include Tote Copse Castle (1.6 miles north-west) and Bognor Regis Museum (2.6 miles south).
Why act early in Lidsey
An open joint is a modest filling job while its edges are sound. Wait until the edges have spalled and the concrete needs repairing before the joint can be filled, with longer closures to match. One visit to deal with every failing joint makes more sense than several trips to a place like Lidsey. Photos of every joint help us quote for the whole job.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why appoint us
- Work carried out by CSCS-carded applicators
- Fully insured
- A Constructionline member, so easy to vet
- One number for every site we cover
Take a look at what affects the cost and our accreditations.
How a job runs
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Jobs in and around smaller places like Lidsey are typically planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Getting the site ready
- Point out parking and an unloading spot
- Have the specification and drawings to hand
- Tell staff and tenants when we will be in
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Related advice
FAQs: Lidsey
Can you take on a job at a hospital such as Bognor Regis War Memorial Hospital?
Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is Saltbox Business Park., near Lidsey, within your area?
Yes. Estates, retail parks and business parks around Lidsey, Saltbox Business Park. Among them, are all within reach. Photos and a short description are enough for a first look.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Will we need to close the floor?
The work is phased. We work aisle by aisle or zone by zone so the rest of the floor stays in use. Tell us your site hours and access windows and we will plan around them.
Do you repair broken joint edges?
We check the edges as part of the survey. Damaged edges are flagged up front so the filling isn’t wasted.
What guarantee do you give on joint filling?
There is a 12-month guarantee on our workmanship, and we hold public liability insurance.
How many days will you need on site?
That varies with the scale of the job, but the work normally takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Looking after the joints
Cleaning and maintenance staff play a part too. Share these points with them:
- Stop forks and pallets being dragged across joints
- Respect the cure time before traffic returns
- Make joint checks part of your floor inspections
- Record damaged joints with a photo and a location
Keep traffic off fresh joints until the time we give you, and it’s worth enforcing. Cones or barriers stop the first driver cutting the corner.
Treating joints while the arrises are sound keeps the work simple. Once they have broken away, edge repair comes first and that takes longer and closes areas for longer.
Quoting for work in Lidsey
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- How much existing material needs removing
- The product specified
- Access and working height
- The site’s rules and procedures
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
What to include in your enquiry
There’s no need for a formal survey. These details are enough to start:
- Clear photos of the problem areas
- Drawings or a marked-up plan, if available
- The asbestos register, for older buildings
- Whether the building will be occupied during the work
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.