Floor Joint Sealing contractors in Shipbourne
Sealant work in Shipbourne for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, with a fixed quote first.
- Grimy joint lines spoiling a showroom floor
- Flexible sealant torn out by wheels
- Brittle joint filler breaking up
Floor joint sealing near Shipbourne
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our floor joint sealing in Shipbourne
Sometimes the concrete either side of a joint has already spalled. Filling against a crumbled arris won’t hold for long, so we’ll tell you if the joint edges need repairing first and leave that decision with you. We work on saw-cut induced joints, joints along racking aisles and construction joints, and the usual reasons a site gets in touch are filler that has parted from one face and dock area joints that have failed first. Whether you call it commercial sealant work, mastic application or joint sealing, in Shipbourne it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Smaller community and commercial buildings around Shipbourne have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Shipbourne (TN11)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What happens if it’s left?
Every jolt over a broken joint passes into the truck, the load and the driver. That means extra wear on wheels and a rougher ride for staff, adding costs nobody plans for. A properly filled joint smooths the route. Halls, stores and units around places like Shipbourne may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
The price depends on how many linear metres there are, what has to come out first and the access. Call for a quote when you are ready.
What you get with us
- 12-month guarantee on workmanship
- One phone line for London, the South East and Scotland
- Work carried out by CSCS-carded applicators
- Products installed to the manufacturer’s instructions
Take a look at our cost guide and our accreditations.
What affects the price in Shipbourne
To price the job, we consider:
- Location, for remote and island sites
- The total length or number of joints
- Specialist products, such as fire-rated or hygienic sealants
- Induction, permit and paperwork requirements
A quote for floor joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
Details that help us quote
However big the job, the same details help:
- Any dates the work must fit around
- Anything awkward about access or site hours
- Drawings or a marked-up plan, if available
- The site address and postcode
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Honest limits
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be one of these:
- Slab panels that rock or move under load
- Cracks across panels caused by settlement or overload
- Level or flatness problems across the floor
Not sure which it is? You can give us a call on 01277 525 020 or send photos by email and we’ll tell you honestly.
Where we work in Shipbourne
- Loading bays
- Joints along racking aisles
- Retail and showroom floors
- Construction joints
- Saw-cut induced joints
- Forklift and pallet-truck routes
Also near Shipbourne
Also in Shipbourne
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Our process
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then handed back before the next one starts. Smaller jobs around Shipbourne can be grouped with others nearby. A fixed quote is given before anything starts.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Make sure the joints can be reached
- Let building users know which areas are affected
- Flag any permit to work we’ll need
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Read more
Signs you need floor joint sealing in Shipbourne
Concrete slabs shrink as they dry out, and saw-cut joints give that shrinkage a planned place to crack. Each panel pulls back as it shrinks and the joints open up, and a filler placed early can part company with one face.
Any of the following is a good reason to get the joints checked over:
- Failing joints at loading bays and dock doors
- Unfilled floor joints collecting dirt and grit
- Sealant pulled out along a truck route
- Drivers complaining about joints on a route
University campuses such as University of Kent - Tonbridge, 3.8 miles south of Shipbourne, have car parks, paved walkways and building elevations with movement joints.
Questions to ask before you book
- How they’ll work around occupants
- Do they follow the manufacturer’s priming guidance?
- Their public liability cover
- Will CSCS-carded applicators be on site?
Shipbourne: questions and answers
Must our site in Shipbourne stop work while the joints are done?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we’ll plan from there.
Is Shipbourne too far out for you?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Do you use semi-rigid filler or flexible sealant on floor joints?
There isn’t one answer for a whole floor. Hard wheels need edge support, which points to a semi-rigid filler, and movement joints or perimeters need something flexible. You will see the choice for each area in the quote.
Does the weather affect the work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Traffic, movement and joints around Shipbourne
Central London is about 24 miles from Shipbourne. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day. Rainfall across the South East, Shipbourne included, is lower than in many parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and gritting in cold spells finds its way into open joints.
Schools such as Shipbourne School have movement joints in their walls and floors that are easy to overlook. Sites like Hollanden Park Hospital, 2.4 miles south-west of Shipbourne, carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Shipbourne is about 3 miles north of Tonbridge, in Kent. We cover commercial sites throughout Shipbourne, whether it’s a single job or part of a planned programme. 931 places across Kent fall within our area, Shipbourne among them. For work in that direction, see our London page (24 miles or so).
Commercial sites across TN11 are covered for floor joints. Streets here include Upper Green Road, Upper Green Lane and Back Lane, and sites on any of them can send details for a fixed quote. If your building is just outside Shipbourne, we cover Budds (1 mile west), Yopps Green (1 mile north), Sheet Hill (2 miles north), Ivy Hatch (2 miles north) and Coldharbour (2 miles south-west). Bigger towns within reach include Maidstone (11 miles east), Dartford (14 miles north), Sevenoaks (5 miles north-west), Royal Tunbridge Wells (8 miles south), Gravesend (13 miles north) and Tonbridge (3 miles south).
Landmarks near Shipbourne
Around Shipbourne, our work takes us to commercial buildings near Ivy Hatch Nature Reserve, Hugh Christie Technology College and The Chaser Public House and the streets around them. The closest station to Shipbourne is Borough Green & Wrotham station, roughly 3.3 miles north of the centre. A little further out are Ightham Court (3.3 miles north) and Hadlow Tower museum (2.8 miles south-east). Not far away are Barden Lake.