
Sheet floor joint sealing
Planning work on a floor joint in Sheet? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Joint fill separating from the concrete
- Soft sealant dragged out of trafficked joints
- Unfilled floor joints collecting dirt and grit
Need floor joint sealing in Sheet?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floors, slabs and movement joints in Sheet
The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint. Sheet lies roughly 49 miles out from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors.
On industrial estates such as Upper Adhurst Industrial Park, which lies north-east of Sheet, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic. A healthcare site such as Petersfield Hospital (to the south-west of Sheet) depends on car parks, ramps and service yards whose joints take traffic all day. Schools like Sheet Primary School often have long brick elevations with movement joints that age quietly.
Sheet is about 1 mile north-east of Petersfield, in Hampshire. We cover Sheet and the rest of Hampshire, with the same fixed quotes and 12-month guarantee as everywhere else. 723 places across Hampshire fall within our area, Sheet among them. We also cover Portsmouth, around 16 miles from Sheet.
Commercial sites across GU32 and GU31 are covered for floor joints. For a building on Mill Lane, Village Street and Farnham Road or nearby, we can quote for floor joints. Just outside Sheet, we also work in Petersfield (1 mile south-west), Steep (1 mile north-west), Steep Marsh (1 mile north-west), Stroud (2 miles west) and Oakshott (2 miles north-west). Further afield, our area takes in Havant (11 miles south), Horndean (8 miles south-west), Alton (10 miles north), Waterlooville (10 miles south-west), Purbrook (11 miles south-west) and Bordon (7 miles north).
Landmarks near Sheet
Recent enquiries here include premises near The Queens Head pub, Churcher's College and The Petersfield School, among other places. Sheet’s nearest station is Petersfield station, about 1.1 miles south-west. Well-known places in the area include Petersfield Community Hospital (1.3 miles south-west) and Bear Museum (1.1 miles south-west). Open spaces near Sheet include Liss Riverside Railway Walk South and Wheatham Hill.
How we handle floor joint sealing in Sheet
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Each job is priced from the metres of joint, their condition and the access windows we get, and the quote is fixed before we mobilise. We work on construction joints, forklift and pallet-truck routes and joints along racking aisles, and the failures we are asked to look at most are joint edges breaking up under truck wheels and trucks and loads jolting over damaged joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Sheet, that means joint design, primers and backing rod as standard.
Smaller community and commercial buildings around Sheet have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.

- Place
- Sheet (GU32, GU31)
- Region
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- A floor that is out of level for the racking or trucks
- Damaged or worn floor coatings and screeds
- A floor that rocks at the joints, which needs a structural fix
If in doubt, call 01277 525 020 or send details through our quote form and we will say what we think.
What we seal
- Retail and showroom floors
- Construction joints
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Joints along racking aisles
- Loading bays
What affects the price in Sheet
Before we quote, we look at:
- Induction, permit and paperwork requirements
- Working within restricted access windows
- Access and working height
- Joint width, depth and condition
The specified product makes a difference, and so does the preparation. Access, phasing and site requirements come into it too.
Before you send an enquiry
To price the job accurately, we need to understand the site. Useful things to include:
- A wide shot and a close-up of the area
- The postcode of the building
- What the building is and how it’s used
- Any dates the work must fit around
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or send details through our quote form.
Keeping the joints sound
Once the work is signed off, a little attention goes a long way:
- Remind operators to lift rather than drag
- Make joint checks part of your floor inspections
- Respect the cure time before traffic returns
- Allow for topping up joints as a new slab settles
Dragged forks and pallets gouge joints and edges alike. Steel tines will mark a good joint over time.
Joints are easiest to look after when someone checks them regularly. We can quote a programme that starts with the busiest areas so nothing is left to fail.
Questions about Sheet
Is Upper Adhurst Industrial Park, near Sheet, within your area?
Yes. Estates, retail parks and business parks around Sheet, Upper Adhurst Industrial Park among them, are all within reach. Photos and a short description are enough for a first look.
Is a hospital such as Petersfield Hospital somewhere you can work?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Do you cover Sheet?
Yes. Sheet falls within our area, and the simplest way to start is to phone 01277 525 020 or send photos by email.
Do you offer coloured sealant?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Can you work to our specification?
Yes. Send it with your enquiry, and we will price the work to it.
Places near Sheet
Also in Sheet
On site: what to expect
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact. If others near Sheet need work, visits can be combined. You will have a fixed quote before work starts.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
What we need from you
- Send any specification or drawings in advance
- Explain the parking and delivery arrangements
- Share your working hours and any access restrictions
Getting a fixed quote
For a fixed quote, call 01277 525 020 or send photos by email. Our quote form is another easy route.
Read more
Building owners, agents and FMs in Sheet
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Why act early in Sheet
Open joints are where dirt collects where scrubber-driers can’t get it out. In shops, showrooms and clean production areas that matters for hygiene and appearance. Flush, filled joints leave nothing for cleaners to dig out. One visit to deal with every failing joint makes more sense than several trips to a place like Sheet. Send photographs of each area and we will quote for the lot.
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a quote when you are ready.
Why appoint us
- Failed material removed, not covered up
- CHAS accredited contractor
- Work to your specification and the manufacturer’s guidance
- One number for every site we cover
See what affects the cost or our accreditations and insurance.