Floor Joint Sealing in Bordon
Sealant work in Bordon for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- Soft sealant dragged out of trafficked joints
- A gap opening alongside old joint filler
- Cracked and crumbling joint fill
Floor joint sealing near Bordon
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing for commercial buildings in Bordon
Across Bordon and the rest of Hampshire, it runs the same way: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. Approximate joint lengths, a few photographs and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. If you’re dealing with a gap opening alongside old joint filler and trucks and loads jolting over damaged joints, we can put it right, on loading bays, construction joints and joints along racking aisles alike. Whoever orders the work in Bordon, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Around Bordon, most floor and movement joint jobs are single buildings or yards. Getting widths, depths and traffic details up front means one visit, not two.
Work we carry out in Hampshire comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or send photos by email and we’ll come back to it.
- Where
- Bordon (GU35)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
What we can’t put right
We check first that sealant really is the fix. It won’t put right:
- Spalled arrises, which need an edge repair first
- Uneven floors that need grinding or levelling
- Unstable slabs moving under traffic
Not sure which it is? You can call 01277 525 020 or use the quote form and we will tell you honestly before you book.
Joints and surfaces we work on
- Saw-cut induced joints
- Joints along racking aisles
- Forklift and pallet-truck routes
- Retail and showroom floors
- Construction joints
- Loading bays
When to bring in a specialist
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Joints that move: notes for Bordon
Bordon is about 43 miles from central London. Warehousing clusters around the motorways that ring and radiate from London. Bordon sits in one of the drier corners of the country, the South East. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints.
Schools like Bordon Infant School often have long brick elevations with movement joints that age quietly. At places like Bordon Enterprise Park, 0.5 miles west of Bordon, joints are sealed a section at a time so operations carry on.
Bordon is about 10 miles south-west of Aldershot, in Hampshire. Our applicators travel to Bordon for work on floor joints, handled exactly as we handle every other area. 723 places across Hampshire fall within our area, Bordon among them. For work in that direction, see our Portsmouth page.
Commercial sites across GU35 are covered for floor joints. Streets here include High Street, Station Road and Cobbett Square, and sites on any of them can send details for a fixed quote. Main routes into Bordon include the A325 and B3002, useful when we plan access and materials. Close to Bordon, our area also takes in Pinewood Village (1 mile north), Deadwater (1 mile east), Whitehill (1 mile south), Lindford (1 mile north-east) and Hollywater (1 mile south-east). Bigger towns within reach include Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (5 miles north-west) and Petersfield (8 miles south-west).
Landmarks near Bordon
Locally, jobs take us to sites close to Mill Chase Academy and the streets around them. Bordon’s nearest station is Liphook station, about 4.1 miles south-east. Nearby you will also find The Romany Museum (3.6 miles west) and Chase Community Hospital (0.6 miles south). Green spaces nearby include Selborne Hill and Deadwater Valley.
After the work
For the best life from the joints:
- Remind operators to lift rather than drag
- Start with the dock areas, where joints fail soonest
- Keep grit out of unfilled joints in the meantime
- Expect fillers on young slabs to need a top-up
Walk the main truck routes every few months and look along the joint lines. Look for separation down one side, new chips in the arris and debris gathering and keep photos so changes are easy to compare.
Grit in an open joint does damage every time a wheel crosses it. Getting it filled stops the damage while it is still a straightforward job.
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Work in places the size of Bordon is planned as a single visit where we can. Clear photos and measurements help us bring the right products.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
Preparing the site
- Let building users know which areas are affected
- Arrange parking or a loading space
- Make sure the joints can be reached
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or send details through our quote form.
Read more
What happens if it’s left?
Painting or coating straight over joints rarely lasts. The joints have to be filled or sealed as joints before or alongside any coating work. Small buildings around Bordon suffer from failed joints as much as large ones. Early resealing avoids the damage that follows a leak.
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why appoint us
- Commercial sealant work since 2005
- Our applicators hold CSCS cards
- Products installed to the manufacturer’s instructions
- Old sealant cut out, never sealed over
Read our cost guide or how we’re accredited.
Nearby places to Bordon
Other services in Bordon
Questions we are asked in Bordon
Can you work at a site such as Woolmer Trading Estate, by Bordon?
Yes. Estates, retail parks and business parks around Bordon, Woolmer Trading Estate among them, are all within reach. Photos and a short description are enough for a first look.
Is Bordon too small for you to travel to?
No. Small places get the same service as large ones. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Is it normal for joint filler to separate?
Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. A top-up normally puts it right.
Should floor joints be filled or sealed?
There isn’t one answer for a whole floor. Where hard wheels cross, a semi-rigid filler is typically right, and movement joints or perimeters need something flexible. The quote sets out what goes where.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
What we’re called out for in Bordon
Floor joints collect dust, oil, curing compound and cleaning residue. If the faces aren’t taken back to clean concrete first the new filler can’t stay bonded.
If one of these sounds familiar, it’s time for a closer look:
- A gap opening alongside old joint filler
- Untidy open joints in a retail unit
- Flexible sealant torn out by wheels
- Loading bay joints breaking down
If you manage units on an estate such as Woolmer Trading Estate (less than half a mile south of Bordon), the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Questions to ask before you book
- How the existing material will be dealt with
- Is the sealant right for the movement and the substrate?
- How joint depth will be controlled
- Health and safety accreditation such as CHAS