The Mastic Doctor team standing beside their branded vans outside an office building
Surrey · England

Floor Joint Sealing in Pyrford

Floor joint sealing and filling in warehouses, factories and industrial units throughout Pyrford and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.

  • A gap opening alongside old joint filler
  • Saw-cut joints left open and packed with grit
  • A rough ride across broken joints
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
Scope agreed and priced before anything starts.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
South East, London & Scotland
CHAS & Constructionline
£5m public liability

Floor joint sealing in Pyrford

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Why it’s worth doing now in Pyrford

Holding off until the whole floor can close can take a long time. Zone by zone, the worst aisles can be dealt with now while the rest of the floor carries on. For buildings in places like Pyrford, one well-planned visit beats several small ones, so we’d suggest renewing all the joints that are going, not just the worst.

The price depends on how many linear metres there are, what has to come out first and the access. Call for a fixed quote once you have the details.

Why appoint us

  • Clear, fixed quotes
  • Our applicators hold CSCS cards
  • One phone line for London, the South East and Scotland
  • Fully insured

Take a look at our cost guide or how we’re accredited.

Floor joint sealing for commercial buildings in Pyrford

Across Pyrford and the rest of Surrey, it runs the same way: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. Approximate joint lengths, a few photos and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. If you have sealant pulled out along a truck route and open saw cuts full of debris, we can put it right. Facilities teams, main contractors and managing agents in Pyrford tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.

In a smaller place such as Pyrford, floor and movement joints are often in agricultural and rural business units, schools and the odd small industrial yard. Concrete floors and yards in these buildings move and crack like any others.

Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.

The Mastic Doctor team beside their liveried vans in front of an office building
Location
Pyrford (GU22, KT14)
Wider area
Surrey
Guarantee
A 12-month guarantee
Quotes
A fixed quote before we start
Call
01277 525 020
Last updated
3 November 2026

Where floor joints take the most wear near Pyrford

The 3 miles around Pyrford take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Pyrford lies roughly 22 miles out from central London. The roads out of London are lined with trade parks and distribution sheds, and their floor joints take forklift and pallet-truck traffic all day.

For an estate such as Woking Community Hospital (2 miles south-west of Pyrford), the joints in ramps, decks and long building elevations all need attention over time. For buildings at a park such as Kingsway Business Park, 0.8 miles west of Pyrford, brick and panel movement joints are easy to forget until one leaks. For a school such as Pyrford Church of England Primary School, playground and building joints can be done in the holidays.

Pyrford is about 3 miles east of Woking, in Surrey. Our applicators travel to Pyrford for work on floor joints. Across Surrey, 379 places are covered, including Pyrford. Our London page has more on work in that area.

Postcode districts covered here: GU22 and KT14 for floor joints. Streets here include Pyrford Woods Close, Pyrford Woods Road and Onslow Way. Sites close to Pyrford are covered too, including Sheerwater (1 mile north-west), West Byfleet (1 mile north-east), Pyrford Village (1 mile south), Woodham (1 mile north) and Old Woking (2 miles south-west). Nearby towns on our patch include Guildford (6 miles south-west), Woking (3 miles west), Camberley (9 miles west), Epsom (11 miles east), Farnham (15 miles south-west) and Ewell (11 miles east).

What’s near Pyrford

In Pyrford, that means premises near The Bishop David Brown School, The Station pub and The Bishop David Brown School and the streets around them. Pyrford’s nearest station is West Byfleet station, about 1 mile north-east of the centre. Other landmarks nearby include Woking Community Hospital (2 miles south-west) and The Peacocks (2 miles west). The countryside around Pyrford includes Papercourt Marshes and St Ann's Hill.

Map of Pyrford © OpenStreetMap contributors

Diagnose, treat, sign off

Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. What matters most for a job in Pyrford is a clear list of what needs doing, so send photos of each area. You will then get a fixed price for the work.

  1. We look at joint widths, edge condition and the traffic on each route.
  2. The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
  3. Old filler, debris and contamination are cut or routed out back to clean concrete.
  4. Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
  5. Filler or sealant goes in to the right depth and is finished flush with the slab.
  6. The area is handed back once it has cured enough to take traffic.

Before we start on site

  • Tell us your opening times and when work is allowed
  • Explain the parking and delivery arrangements
  • Clear stock, furniture or equipment away from the joints

Get a fixed quote

Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or send details through our quote form.

Get a price

Read more

When something else is needed

Our job is the joint, not everything around it. On its own, sealant can’t deal with:

  • Uneven floors that need grinding or levelling
  • Cracks across panels caused by settlement or overload
  • Slab panels that rock or move under load

If in doubt, give us a call on 01277 525 020 or send details through our quote form and we’ll say what we think.

What we seal

  • Retail and showroom floors
  • Joints along racking aisles
  • Saw-cut induced joints
  • Construction joints
  • Loading bays
  • Forklift and pallet-truck routes

Looking after the joints

After handover, a little attention goes a long way:

  • Allow for topping up joints as a new slab settles
  • Walk the main routes and inspect joint lines on a regular cycle
  • Clear packed debris from open joints regularly
  • Start with the dock areas, where joints fail soonest

Dragged forks and pallets gouge joints and edges alike. Even a well-filled joint can be damaged by steel scraping along it.

Edges tend to break slowly at first, then quickly. Once the first piece is out, wheels drop further and hit harder so early treatment saves a lot of trouble.

General trades versus a specialist

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.

FAQs: Pyrford

Is hospital work, at somewhere like Woking Community Hospital, something you do?

Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.

Can you work at a site such as Kingsway Business Park, by Pyrford?

Yes. Estates, retail parks and business parks around Pyrford, Kingsway Business Park among them, are all within reach. A few photographs and the unit address let us price the work.

Will your applicators have CSCS cards?

Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.

Can you follow the specification on our project?

Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it, flagging anything that needs clarifying.

Do you use semi-rigid filler or flexible sealant on floor joints?

There isn’t one answer for a whole floor. Hard wheels need edge support, which points to a semi-rigid filler, and movement joints or perimeters need something flexible. You’ll see the choice for each area in the quote.

Do you seal on top of existing sealant?

No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.

What about RAMS and site documents?

Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.

Work for main contractors and building owners

Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Pyrford can form part of a wider programme across Surrey.

CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.

Accreditations

Trusted. Accredited. Insured.