Industrial and floor joint sealing in Newhaven, Edinburgh
Floor joint sealing in Newhaven, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- A gap opening alongside old joint filler
- Old filler gone hard, cracked or loose
- Trucks and loads jolting over damaged joints
Need floor joint sealing in Newhaven?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Our process
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. In a Scottish city, kerbside space and loading need planning, especially near the centre. Shared closes, stairs and the property factor may need to be part of the plan.
- First, the zones and order of work are agreed with you.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Getting the site ready
- Send your site hours and access windows
- Tell us which areas need to stay in use
- Let building users know which areas are affected
Getting a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Related advice
Floor joint sealing in Newhaven
Few warehouses can shut a whole floor while joints are done, so we phase the work aisle by aisle or bay by bay. Share your site hours and access windows and the programme is built around them, with goods still moving in the areas we aren’t in. We work on saw-cut induced joints, retail and showroom floors and construction joints, and the failures we are asked to look at most are chipped and spalling edges along forklift routes and filler that has parted from one face. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Newhaven, preparation and product choice get the time they need.
Around the edges of Scotland’s cities are warehouses, trade counters and distribution units, each with saw-cut and construction joints under forklifts and pallet trucks. We work in phases with a product suited to the traffic, so operations carry on.
Our workmanship is guaranteed for 12 months, in Newhaven as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Place
- Newhaven (EH6, EH5, EH7)
- Wider area
- Edinburgh
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Also near Newhaven
Other services in Newhaven
Why deal with it now?
An open joint is a modest filling job while its edges are sound. Left until they break, it needs an edge repair before any filling can start which means more downtime in that zone. Failed sealant in a shared building in Newhaven can affect more than one owner. Acting early avoids disputes and bigger repairs.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What you get with us
- One phone line for London, the South East and Scotland
- Public liability insurance in place
- Sealing commercial buildings since 2005
- CHAS accredited
See how commercial sealant jobs are priced or how we’re accredited.
Traffic, movement and joints around Newhaven
The sea is no more than about 1 mile from Newhaven. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so it pays to keep them sealed. At least three named trading, business or retail sites lie within about 3 miles of Newhaven. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
Campuses like University of Edinburgh - Holyrood Campus, 2.1 miles south of Newhaven, mix old and new buildings, with movement joints wherever they meet. Retail centres such as Newkirkgate Shopping Centre (to the south-east of Newhaven) have floors, service yards and car parks with joints under constant traffic.
Newhaven is about 3 miles north of Edinburgh, in Edinburgh. Newhaven sits inside our coverage and the rest of Edinburgh, with the same fixed quotes and 12-month guarantee as everywhere else. Newhaven is one of 174 places in Edinburgh on our list for floor joints.
Postcode districts covered here: EH6, EH5 and EH7. Streets here include York Road, Park Road and Ferry Road. Access to Newhaven is via the A901 among other routes. Sites close to Newhaven are covered too, including Victoria Park (1 mile south), North Leith (1 mile south-east), Bonnington (1 mile south-east), Powderhall (1 mile south) and Leith (1 mile east). Further afield, our area takes in Edinburgh (3 miles south), West Coates (3 miles south-west), Sciennes (3 miles south), Merchiston (3 miles south), Newington (3 miles south) and Queensferry (8 miles west).
Near you in Newhaven
Around Newhaven, our work takes us to commercial buildings near Drummond Community High School, Starbank Park and McDonald Road Library and the streets around them. Newhaven’s nearest station is Edinburgh Waverley station, roughly 1.9 miles south. Well-known places in the area include History of Education Centre aka Victorian Schoolroom (less than half a mile north) and Leith Hospital (0.7 miles south-east). The countryside around Newhaven includes Dunsapie Loch and The New Leaf Co-op.
Common questions from Newhaven clients
Can you work on a hospital site such as Western General Hospital (Edinburgh)?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Can being near the sea in Newhaven affect the sealant we need?
It can. Coastal exposure works external joints harder than inland weather. We check the specified product suits the exposure and pay close attention to preparation.
Do you have public liability insurance?
Yes. We’re fully insured, including public liability cover.
Do you repair broken joint edges?
We check the edges as part of the survey. Damaged edges are flagged up front, so nothing is filled that won’t hold.
What information helps you price floor joint sealing?
A rough joint length, a few photos and a site plan let us give a quick quote. For larger floors, a site visit is often best so phone 01277 525 020 or email the details over to set one up.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, which many sites require.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Different surfaces, different methods
Semi-rigid joint fillers
A semi-rigid fill can separate along one side while a slab is still shrinking. That is normally dealt with by topping up later, and we’ll explain it when we quote.
Construction joints
Day joints vary, with or without armoured edges. If the edges look unsound, we’ll say so before any filling is done.
How the quote is worked out
Your fixed quote is built from the real scope. It takes account of:
- Site requirements such as inductions and permits
- Joint width, depth and condition
- Distance, for remote addresses
- How much there is to seal
The product called for affects the cost, and so does the preparation. Access, phasing and site rules also count.
Sending details for a quote
To price the job accurately, we need a clear picture of the site. Send us:
- Clear photographs of the problem areas
- Anything awkward about access or site hours
- Whether the building will be occupied during the work
- Approximate linear metres or a joint schedule
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Do you need floor joint sealing in Newhaven?
Older fills harden, shrink and crack with age, particularly where cleaning machines and traffic work it daily. Once it has gone hard or come loose, it protects nothing.
Common reasons buildings call us in:
- Loading bay joints breaking down
- Joint fill separating from the concrete
- Drivers complaining about joints on a route
- Brittle joint filler breaking up
For an estate such as Western General Hospital (Edinburgh), 2 miles south-west of Newhaven, the joints in ramps, decks and long building elevations all need attention over time.
Questions to ask before you book
- Their approach to joint depth and backing
- How the existing material will be dealt with
- How the joint faces will be prepared and primed
- The terms of the workmanship guarantee
Keeping the joints sound
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Stop forks and pallets being dragged across joints
- Record damaged joints with a photo and a location
- Start with the dock areas, where joints fail soonest
- Tell us about strong cleaning chemicals before we quote
Normal floor cleaning is fine once the product has cured. Tell us about aggressive cleaning products or hot washing at quote stage so the product suits them.
While the concrete edges are intact, it’s a filling job. Once they have broken away, edge repair comes first, with more downtime and more disruption.