Industrial and floor joint sealing in Cheriton, Hampshire
Looking for floor joint sealing in Cheriton? It’s simple: send details, get a quote, we seal, guaranteed.
- Loading bay joints breaking down
- Broken arrises where pallet trucks cross
- Old filler gone hard, cracked or loose
Floor joint sealing for Cheriton sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Common questions from Cheriton clients
What site paperwork comes with a job in Cheriton?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Is Cheriton off your patch?
No. Places such as Cheriton are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
What guarantee do you give on joint filling?
Our workmanship carries a 12-month guarantee, and we hold public liability insurance.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
How we handle floor joint sealing in Cheriton
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Each job is priced from the metres of joint, their condition and the access windows we get, and the quote is fixed before we mobilise. If you have drivers complaining about joints on a route and unfilled floor joints collecting dirt and grit, we can help, whatever the surface. Searching for sealant specialists in Cheriton? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
For a site near Cheriton, measurements and photographs up front mean one trip where possible, with the right materials on hand. Tell us the joint widths if you can, and what drives or walks over them.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Cheriton (SO24)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What else we do in Cheriton
Surface by surface
Isolation joints at walls and columns
We plan column and wall joints around racking and fixed plant.
Retail and showroom floors
Retail work is phased around trading. Give us your opening pattern and access windows and the phasing follows.
Floors, slabs and movement joints in Cheriton
At about 56 miles from central London, Cheriton is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors. Cheriton sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, while winter salting gets into any joint left open.
Schools such as Cheriton Primary School have movement joints in their walls and floors that are easy to overlook.
Cheriton is about 7 miles east of Winchester, in Hampshire. We cover commercial sites throughout Cheriton. We work across 723 places in Hampshire, large and small. We also cover Southampton, around 14 miles from Cheriton.
Postcode districts covered here: SO24 for floor joints. Buildings on Lower Lamborough Lane, Raebarn Close and Markall Close are within our area. Nearby places we also cover include Hinton Ampner (1 mile east), Beauworth (2 miles south-west), Bramdean (2 miles east), New Alresford (2 miles north) and Bishop's Sutton (3 miles north-east) for floor joints. Further afield, our area takes in Basingstoke (15 miles north), Winchester (7 miles west), Havant (15 miles south-east), Eastleigh (10 miles south-west), Fareham (14 miles south) and Horndean (12 miles south-east).
Around Cheriton
Around Cheriton, our work takes us to commercial buildings near The Flowerpots Inn, among other places. The countryside around Cheriton includes Beacon Hill and Shutts Copse.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is one of these:
- Spalled arrises, which need an edge repair first
- Level or flatness problems across the floor
- A failing floor coating, which is a flooring contractor’s job
Not sure which it is? You can speak to us on 01277 525 020 or use the quote form and we will tell you honestly.
Joints and surfaces we work on
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Retail and showroom floors
- Loading bays
- Construction joints
- Joints along racking aisles
How the quote is worked out
To price the job, we consider:
- Phasing around occupants
- Removal of failed or old sealant
- Quantities, in metres or numbers
- Backing rod, priming and other preparation
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
A few photos plus some basic facts will normally do. Please tell us:
- The asbestos register, for older buildings
- Specification clauses that apply
- Approximate linear metres or a joint schedule
- Where the site is, with the postcode
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to give us a call on 01277 525 020 or email a schedule or drawings with what you know.
Do you need floor joint sealing in Cheriton?
Joints near dock doors see colder air, rain blown in and water off vehicles on top of the heaviest turning movements. They are often the first on a site to break down.
If one of these sounds familiar, it’s time for a closer look:
- Soft sealant dragged out of trafficked joints
- Saw-cut joints left open and packed with grit
- Brittle joint filler breaking up
- Loading bay joints breaking down
Around Cheriton, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Questions to ask before you book
- Whether their applicators hold CSCS cards
- Their approach to joint depth and backing
- Which product they’ll use, and why it suits the joint
- Will failed sealant be removed rather than covered?
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For a building around Cheriton, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Before we start on site
- Agree which areas must stay open
- For older buildings, check the asbestos register before work
- Move anything stored against the joints
Request a quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to phone 01277 525 020 or email drawings and photos.
Related advice
Doing it in-house
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.